Question about Chrysler Sebring

Open Question

Failed smog. these codes came up p0736, p1775, p0732, p0733

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: i have a doge gran

CODE P1775 - A / T OR AUTOMATIC TRANSMISSION SWITCH LATCHED IN TCC POSITION. CODE PO732 - A / T ADDITIONAL GEAR RATIO ERROR IN SECOND GEAR. CODE PO700 - AUTOMATIC TRANSMISSION CONTROL SYSTEM MALFUNCTION CODE PO456 - EVAP SYSTEM SMALL LEAK DETECTED.POSSIBLE CAUSE FUEL TANK CAP LOOSE OR DAMAGED , SMALL LEAK PRESENT SOMEWHERE IN EVAP SYSTEM. I DID NOT SEE CODE P1788. BUT CODES P1775, P0732 , PO700 , YOU HAVE INTERNAL TRANSMISSION PROBLEMS TRANSMISSION SHOP HAS TO HOOK DIAGNOSTIC EQUIPMENT TO CHECK TRANSMISSION PRESSURE SOLENOIDS AND SHIFT SOLENOIDS. TRANSMISSION VALVE BODY HAS MANY SOLENOIDS PRESSURE SWITCH AND SENSORS COST TOO MUCH REPLACE THEM ALL LET GARAGE SCANNED TRANSMISSION BE MUCH CHEAPER.

Posted on Nov 07, 2010

alicantecoli
  • 22095 Answers

SOURCE: OBD codes P0700, P0732, P0733,

P0700....Transmission Control System (MIL Request)


P0732....Gear 2 Incorrect Ratio


P0733....Gear 3 Incorrect Ratio


P0841....Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance


P0871....Transmission Fluid Pressure Sensor/Switch "C" Circuit Range/Performance

well it would appear so as the fluid pressure sensor switch is controling the gear change as as you have two faulty switches its affecting two gears .now you are also showing a code for not connecting the information to the computer ,so i would check the connection plug on the gearbox in case some of the connections are corroded or burnt inside the connection plug before you go any further ,if they all appear to be ok and have a continuety circuit with a meter then i would be inclined to ask a specialist autogearbox garage for a opinion .Autoboxs are not something we have that many of in europe because they are called granny wagons here and are not popular because when they go wrong it means throwing the car away

Posted on Dec 06, 2010

kenmac59
  • 163 Answers

SOURCE: P0700-P0733-P0731-P0736-P0876-P0841- DODGE RAM

there is a transmission problem.

Posted on Jan 06, 2011

SOURCE: have a P0732 and P0733 scan code on my Ford

They are transmission codes

You will need help to diagnose
the cause of 2nd & 3rd Gear Ratio
Incorrect

Could be a sensor on trans & you
will most likely have 3, that are possibly
near the top, and not accessible,without
lowering the trans. Just a heads up,hopefully
not the case.

Try a good repair shop with trans experience
or a trans shop

Posted on Feb 22, 2011

  • 1 Answer

SOURCE: presenta falla con codigos p1762, p0732, p0733,

p1260

Posted on May 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2012 Dodge Avenger that is showing the codes P0732, P0733, P0734. The rpms go up even when not accelerating. And then it won't go into gear. When it's in Drive it's like its in Neutral.


Those codes indicate the PCM/TCM has determined an incorrect gear ratio for 2nd, 3rd, and 4th gear respectively. That's because it is comparing the signals from the input speed sensor and the output speed sensor on the transmission, and one or both of them is not providing an accurate signal. I would guess that one (or both) has failed and needs to be replaced.

Jul 30, 2017 | Dodge Cars & Trucks

1 Answer

Why is my Hyundai accent 05 codes are p0732,p0733, p0734 how do infix it?


Not sure but by the looks of the numbers and the fact they are sequential my guess would be a misfire in cylinders 2,3, & 4.

Aug 24, 2014 | Cars & Trucks

1 Answer

99 Plymouth voyager and these codes came up p0731, p0732, p0736, p0700 what can i do about it


Probably not much you can do yourself.
Code 700 is a general fault code for the transmission or control module. Code 731 is for incorrect ratio for first gear, 732 is for 2nd gear, and 736 is for reverse. The actual problem could be mechanical or electrical, including the transmission control module.
You would need a shop manual and the necessary tools to check the circuits and solenoids inside the transmission.

Feb 09, 2014 | Cars & Trucks

1 Answer

1774 and 1775


There is probably no need to contact the BAR though you always have the right reserved. Trouble Code P1774 indicates your Mini's rear wheel speed sensor lost its signal, and trouble code P1775 indicates the right rear wheel speed sensor lost its signal as well. Both more than likely triggered during the dynamometer portion of the smog check inspection; while the front wheels are turning and the rear wheels are stationary. During this time, as far as the ABS system knows, the rear wheel sensors have lost their signals.
After a computer reset and driving your Mini Cooper for a few miles everything should return to normal, as apparently they have; and you've passed the smog check. Should the check engine light return in the near future for the same trouble codes P1774 and P1775 we'd recommend inspecting the rear wheel speed sensors for possible debris build-up. Since these trouble codes where triggered during the smog check and smog check machine failure we can assume the trouble codes were temporary and not related to any physical problem with your Mini Cooper.

Oct 23, 2013 | 2006 Mini Cooper

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

I have a 2002 Chrysler Town and Country with OBD Codes: P0700; P0732; P0733; P0736; P0841; P0846 and P0992. Is this van worth fixing?


You might want an estimate from a shop after showing them the code list. Odd, but all codes that start with P0***, are generic codes applicable to all vehicles, but after a too-short search, I couldn't find the P 0800's, or the P0992. It could still be something electrical, not mechanical, in the transmission, but still cost more to fix than feasible if the shop has to do a lot of testing-my way of saying the Town and Country is better left on the side of the road than down it, lol.

Jan 10, 2013 | Chrysler Town and Country Cars & Trucks

1 Answer

I have a doge gran carvan 2000 or 2001 3.3v6 i have cods coming up as falows p1775 p0732 p1788 p0700 p0456 can eny buty tell me wher to start got it today at an auction dont know much


CODE P1775 - A / T OR AUTOMATIC TRANSMISSION SWITCH LATCHED IN TCC POSITION. CODE PO732 - A / T ADDITIONAL GEAR RATIO ERROR IN SECOND GEAR. CODE PO700 - AUTOMATIC TRANSMISSION CONTROL SYSTEM MALFUNCTION CODE PO456 - EVAP SYSTEM SMALL LEAK DETECTED.POSSIBLE CAUSE FUEL TANK CAP LOOSE OR DAMAGED , SMALL LEAK PRESENT SOMEWHERE IN EVAP SYSTEM. I DID NOT SEE CODE P1788. BUT CODES P1775, P0732 , PO700 , YOU HAVE INTERNAL TRANSMISSION PROBLEMS TRANSMISSION SHOP HAS TO HOOK DIAGNOSTIC EQUIPMENT TO CHECK TRANSMISSION PRESSURE SOLENOIDS AND SHIFT SOLENOIDS. TRANSMISSION VALVE BODY HAS MANY SOLENOIDS PRESSURE SWITCH AND SENSORS COST TOO MUCH REPLACE THEM ALL LET GARAGE SCANNED TRANSMISSION BE MUCH CHEAPER.

Nov 07, 2010 | Dodge Caravan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...