Question about 1989 Ford Probe

1 Answer

My 95 2.5 ford probe drivers side radiator won't ever come on, how do i link it to the passanger side one or how do i get it working. Its a right hand drive. Also the oil pressure gauge some times works and some times doesn't, the oil is fine, but i'd like to get these small problems sorted but without breaking anything and by keeping the costs low, doing it myself

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Check the fuse to the fan see if it blown, if not move to the relay located under the hood. the relay when energized should make just a little click noise. sometimes the relay from the other fan can be swapped with this one just to check. if the relay checks out good then your problem lies with either the fan it self or the wiring from the relay to the fan.

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the transmission oil pan located on a 95 ford probe??


it fills through the dipstick tube, with engine running,

Apr 13, 2014 | 1995 Ford Probe

1 Answer

95 ford probe car runs ok but blows whitish blue smoke as accelerate


That is probably the head gasket leaking. White smoke is from antifreeze going through the exhaust. The engine compression is pushing the water out of the radiator.

Nov 27, 2013 | 1995 Ford Probe

1 Answer

The seat belt in my 1990 ford probe had the track cord messed up how can I fix it?


Ford had a recall for the seat belt not working, contact a Ford dealer near you to see if your car fall in that recall it would likely be free.

Mar 16, 2013 | 1990 Ford Probe

1 Answer

Oil in the floorboard of '77 Ford Bronco


if there was an alternate gauge installed it may have a oil line on it from the engine to the gauge if so it might have a hole in that line is it on the driver side or passanger side?

May 19, 2012 | Ford Bronco Cars & Trucks

1 Answer

Removal of passanger side airbag and driver side in steering wheel


I HAD I BOLT ON PASSANGER SIDE THAT REQUIRES REMOVEING PANEL ON TOP OF DASH TO ACCESS BOLT, CAME RIGHT OUT WITH NO PROBLEMS. DRIVERS SIDE REMOVED BOLTS CAME RIGHT OUT

Nov 30, 2009 | Ford Expedition Cars & Trucks

1 Answer

Ford Probe tapping.


That's actually nothing to worry about. It's actually a butterly valve in your intake. I have a 96 gt, and used to have a 93 gt. My buddy had a 95 gt, and all of those cars had the same sound. It's loud and annoying, I know, but there is no way around it. What you can do to prove that is the problem (which I'm sure it is), is look at your intake plenum. Look at where your throttle cable meets your throttlebody. There is a little arm attached to a solonoid (air actuated) that is close to the firewall, and toward the passanger side on the throttlebody. The lever rests on a little metal nipple that sticks out of the cast. you can move it back and fourth. Run your car, and lift that lever just a tiny bit until you hear the noise go away. What I did was put a tiny bit of solder on the nipple where the arm rests to keep it up that tiny bit so the noise would'nt be there anymore.

If that doesn't solve it, then you may have a bad valve.

Jul 11, 2009 | 1995 Ford Probe

2 Answers

Locating fuel shut-off safety switch


The Inertia Fuel shut-off switch on a Festiva.
Is located : In LEFT REAR of Passangers. compartment.
Almost in the rear corner.

I hope you find.
Thank you for use fixya.

Jul 23, 2008 | 1995 Ford Aspire

1 Answer

2002 crown vic


you need to jack that side of the engine up. take the right side motor mount bolt loose then jack the engine up from underneath. be sure to use a block of wood or somthing so you dont bust the oil pan

Jul 22, 2008 | 2002 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...