Question about 2005 Hyundai Elantra

1 Answer

On My 2005 Hyundai elantra 2.0 if I plug my cam sensor in it will turn over but won't start. If I unplug cam sensor it will start but car has a slow start on take off need help?

Posted by on

  • 1 more comment 
  • ahyattusinst Apr 06, 2011

    Replaced crank sensor

  • ahyattusinst Apr 06, 2011

    Replaced crack sensor

  • ahyattusinst Apr 07, 2011

    Computer scan shows cam sensor plus oil temp sensor replaced both still having same problem. So so you think valve timing is off?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 44 Answers

Remove cam sensor clean it put it back in try the car if it still not right replace the sensor you may need to replace crank sensor as well when did it last have a timing belt replaced ?if its got over100 ,000 km on it and hasnt been done i would have it done if the belt brakes it can be fatal for the engine if its old then it may have jumped a tooth wich will put the cam timing out i would look there first turn the engine over by hand till the timing mark on the crank pulley is showing tdc remove the top half of the timing belt cover remove no1 spark plug use a suitable probe to check that no1 piston is at the top if so check the marks on the cam gears are in line with there marks if all marks line up the valve timing is ok

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cam sensor 2002 hyundia accent 1.5?


    More images for Where is the cam sensor 2002 hyundai accent 1.5

    Hyundai Crankshaft Position Sensor Removal - YouTube

    ? 3:42
    https://www.youtube.com/watch?v=0YLYDU_5w8w
    Jul 12, 2012 - Uploaded by richpin06a
    Hyundai Elantra Crankshaft Position Sensor Removal.

    Hyundai accent 2001 - YouTube

    ? 2:44
    https://www.youtube.com/watch?v=fzqMNho3xIU
    Nov 25, 2012 - Uploaded by mig dups
    2000 Hyundai Accent GS turns over - no start. ... HyundaiCrankshaft Position Sensor Replace Timing Belt ...


Dec 26, 2015 | Cars & Trucks

1 Answer

No Spark


If you have no spark at the plugs, are you getting voltage and a ground signal at the coil when you crank the engine ?

Dec 13, 2012 | 2005 Hyundai Elantra

1 Answer

Need fil for error code P2626 Hyundai Elantra GLS


P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)

I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.

Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.

Hope this help (remember rated this post).

Mar 25, 2010 | 2005 Hyundai Elantra

1 Answer

My 2000 Elantra is slow to start what could be wrong with it?


Could be several things..
If it is turning slow on starting - it could be a week battery..
If it turning good and fast on starting it could need a tune up..
Pugs, wires, pcv valve, fuel filter, air filter, oxygen sensors...

Have a great day !

Oct 26, 2009 | 2000 Hyundai Elantra

2 Answers

P0139 code for a 2003 hyundai elantra. What is this code?


Hi the code P0139 is Bank 1 sensor 2 lambda sensor fault ,possible wiring or sensor fault even if you replace the sensor you need to have the MIL lamp turned off by a Diagnostic machine,it is possible you have another fault such as poor Catalytic converter efficency giving the same fault code ,Would recomend you get the car checked and read the "live" data as the car see`s it to make an accurate diagnosis and cure

Jul 10, 2009 | Hyundai Motor 2003 Elantra

2 Answers

Check engine light on,running rough code P0172


When I see all these codes i instantly think of two things. Vacuum leak especially intake manifold gaskets and Mass air flow sensors. Spray the engine with carb cleaner when its running and see if you get it to rev up,run rough or run different. Next unplug the MAF and drive the car, see if it runs normal.

Jun 02, 2009 | 2005 Hyundai Elantra

3 Answers

Oil change procedure on a 2005 Hyundai elantra


it is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely

Jan 20, 2009 | 2005 Hyundai Elantra

Not finding what you are looking for?
2005 Hyundai Elantra Logo

665 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...