Question about Isuzu Hombre

Open Question

Where is the pcv valve located on the engine of 1996 isuzu hombre 4 cylinder engine?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Where is the PCV Valve located on the 1996 4 cyl Cavalier?

the thumbscrew with a hose coming out on the pass. side of your valve cover

Posted on Jul 21, 2008

Ad
  • 3 Answers

SOURCE: PCV valve location

if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Posted on Nov 07, 2008

ndguy2481
  • 251 Answers

SOURCE: LOCATION OF PCV VALVE ON

Under hood, center, rear engine area, mounted on upper rear of engine block clearpixel.gif

Posted on Dec 06, 2008

  • 76 Answers

SOURCE: find the pcv valve on a dodge neon 1996

When facing the engine compartment, the pcv valve will be located on the right end of the valve cover. It threads into the cover and will have a rubber hose attached also.

Any further problems, give me a shout.

Posted on Dec 13, 2008

  • 11 Answers

SOURCE: Location of the pcv valve on a 96 chevy cavalier

it should be in the top of the intake manifold, the air cleaner tube goes into the throttle body and there is a little line that runs from the air cleaner tube into the pcv value and is screwed into the intake manifold.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location or diagram Oil sending unit 98 isuzu hombre


what engine, THE CAR IS A GM s10 IN DRAG.
4.3L v6 Vortec 4300, GM
2.2l i-4, OHV ENGINE. NOT ISUZU!!!

In 1996, Isuzu replaced its Pick Up with a version of the Louisiana-built Chevrolet S-10, the Isuzu Hombre, based on the Brazilian market S-10
so google the vortec 4300
here Ill type for you....

on most v6, its near the oil gallery , on a bank.
so that means if youd look on both banks , the one with the 1 wire sensor is it.
but not this v6
its here.
log in to mitchell's and read, its all there.



26367766-311i13us0ynxlomdu4i50tnk-3-0.jpg

Nov 22, 2016 | 1998 Isuzu Hombre

1 Answer

Does the Isuzu 200KB LDV 1996 have an interference engine?


we dont have KB in USA, and this is a USA forum so why ask us?
my guess you are in South Africa and asking green-go's aBout
this? why,? my guess its the 2.0L gas engines.
if you look on wiki, there is nothing there, due to above. facts
why not learn what is three, and do a wiki update, so everyone might know.
why even ask, just treat it as interference and I promise you
nothing bad will happen. see?
not only that , many engine blocks run different heads same block.
2 valve, 4 valve per cylinder , and turbo

here is the list , find yours, or add,it.
https://en.wikipedia.org/wiki/List_of_Isuzu_engines

Sep 13, 2016 | 1996 Isuzu Hombre

2 Answers

What are the head torque specs?


1996 Isuzu Truck Hombre 2.2L SFI 4cyl

zjlimited_545.jpg

Fig.: Cylinder head bolt torque sequence-2.2L engine

Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.

Hope this helps (remember to rate this answer).

Jan 25, 2011 | 1996 Isuzu Hombre

1 Answer

Need spark plug wiring diagram for a 96 isuzu hombre 2.2L 4 cylinder


1996 Isuzu Hombre 2.2 liter SOHC L4 CPC

3a42566.gif


Good luck (remember rated this).

Jul 01, 2010 | 1996 Isuzu Hombre

1 Answer

My 97 Hombre with 2.2 L 4 cyl, all of a sudden


probably the throttle position sensor,but also could have jumped time.i would take the T.P.S. out and check the resistance,i am not sure what the correct resistance is for that model but you can find out at the parts store.

Nov 21, 2009 | 1996 Isuzu Hombre

1 Answer

The clutch has lost all pressure how do I bleed the line. Its a 1996 Isuzu Hombre


Down on the trans is the slave cylinder and it should have a bleeder valve on it. Make sure the clutch master cylinder is full and have someone pump the clutch pdeal then hold it down. Open the bleeder valve and then close it. Do this till you get a steady flow of fluid with no air bubbles.

Sep 29, 2009 | 1996 Isuzu Hombre

1 Answer

Pickup issue


Hi, if I can help I will, The timing chain has most likely broke.If this model is a interference engine,then it may have bent some valves.First thing to check would be to see if the cam is turning.May be the valve cover has a oil cap ,if so,take oil cap off and see if the rocker arms are moving when you turn the engine over.If not you may have to take the valve cover off to see.If I can help you with anything else let me know.roniecon@gmail.com

Jul 10, 2009 | 1996 Isuzu Hombre

1 Answer

Idle speed of 96 hombre 4 cylinders


The vehicle is going to idle higher when the a/c is on to compesate for the extra load that is on it at an idle.Dont worry about it.

Mar 28, 2009 | 1996 Isuzu Hombre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...