Question about 1991 Honda Accord

1 Answer

91 civic manual trans

I have a 91 civic hatchback with 1.5 and manual transmission i have problems finding 1st and 2nd gear but other gears are fine i have check the clutch and linkage no problems there an ideas?

Posted by on

  • Anonymous Mar 19, 2014

    pops out of fifth gear

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

Bearings in the trans. sounds like rebuild time

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission slipping in 2nd gear


1 Ck A/T fluid level & quality
2 Scan/ck for code(s)
3 With scan tool connected,road test vehicle/Ck parameters....
....time for a pro !!

Apr 06, 2014 | GMC Sierra Cars & Trucks

Tip

General Motors gear ratios hide] 1 GM Rear Wheel Drive...


General Motors gear ratios
hide]

GM Rear Wheel Drive Transmissions

PTU = Power Transfer Unit (Crossover SUV AWD/4WD)

6 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
MNK Allison 1000
MNZ Allison 1000
MW7 Allison 1000
MYB
MYC

5 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M74 Allison 1000
M22 5L50-E
M82 5L40-E
MTW Allison 2400
MX4 Allison 2000
MX5 5L40-E with PTU*
MV3 5L50-E with PTU*

4 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M30 4L60-E
M32 4L60-E HD
M32 4L65-E
M33 4L60-E Hybrid
M41 4L30-E
M70 4L70-E Super Duty
M99 2ML70 2-mode Hybrid*
MD8
ML4 4L30-E
MN8 4L80-E HD
MN8 4L85-E
MT1 4L80-E
MW9 HM 200-4R
  • EVT Mode 1 The 2ML70 can operate in electric mode or non-electric mode in first gear with a gear ratio of infinity to 1.70:1.
  • EVT Mode 2 The 2ML70 operates in non-electric mode with a gear ratio of 1.70 - 0.738:1

3 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M40
M41
M65
MD2
MD3 HM-180
HM-200C
HM-350
HM-400

GM Front Wheel Drive Transaxles

6 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MH2
MH4
MH6 6T75 (AWD)
MH7
MH8
MY9 6T75 (AWD)

5 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
Aisin-AW 55-51LE
M09 Aisin-AW AF33-5
M43 Aisin-AW AF23-5
M45 Aisin-AW AF33-5
M98 AF33-5
MJ7 Honda 5AT
MJ8 Honda 5AT w/PTU*
MLS Aisin 50-40E
MU3 Saab 76.5mm

4 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MLQ Aisin 81-40LE
Aisin ZF 4HP 16
HM 325-4L
Jatco JF405-E
M10 Jatco JF403-E
M13 4T60-E HD
M13 4T60-E
M15 4T65E
M45 Aisin-AW AF33
M57 A245-E
M76 4T65E with PTU*
MD7 4T65E
ME7 4T45-E BAS Hybrid
ME8
ME9
MH1 4T80-E
MN3 4T65E
MN4 4T40/45-E
MN5 4T45-E
MN7 4T65E HD
MS7 A240-E
MU4 A246-E
MU5 U341-F

3 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
M60 GEO Metro
MB3 A131L
MD9
MX1 A131L
GEO Storm
HM-425

GM Manual Transmissions

6 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M10 Tremec 85mm
M12 Tremec T56
ML6 ZF S6-650
ML9 ZF S6-40
MM6 Tremec T56
MV1 Aisin 85mm
MV5 Aisin D173 AY6
MV6 Aisin 85mm
MZ6 Tremec 85mm

5 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M35 Getrag 260
M35 Getrag 260 (2003-2004 Cadillac CTS)
M49 BW 5spd
M50
M59 GEO Tracker
M86 Getrag F23 75mm
M94 Getrag F23
M96 Tremec 109mm
MA5 Aisin AR5 82mm
MG3 Getrag F23
MG5
M50
M51
MH3 Tremec T-5
MK5 C59
ML2 Tremec T-5
ML3 Tremec T-5
MT8
MU3 Saab F25
MW2
MW3 NV4500 109mm
TR-3450
TR-4050
TR-4050
2007 Chevrolet Optra and Spark (Trans code Y4A)
2007 Chevrolet Optra and Spark (Trans code Y4M)

4 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M20 HM-117
M73 Isuzu
MC0 Getrag
MC9
MY6 NP260

More GM Manual Transmissions

6 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
MT2 Opel F40 83mm
MU9 Opel F40 83mm
MTN Toyota C60

5 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
D-16 (2005-2008 Chevrolet Aveo 1.4 DOHC / 1.5L)
D-16 (2005-2008 Chevrolet Aveo 1.4 SOHC)
Y4A (2007 Pontiac Matiz)
YM4 (2005-2007 Chevrolet Aveo)
D-20 (2005-2007 Chevrolet Epica)
L73 Pontiac LeMans F16
M42 Geo Metro
M43 AF23
M49 BW 5spd
M58 Geo Metro
M79 LeMans F13
M86 Getrag F23 (5T45MI)
M94 Getrag F23
M98 Aisin 55-51E
MB4 Geo Prizm 1.8L
MB5 Geo Prizm
MFB 2008 Chevrolet Epica 5-Speed S/R (D24)
MFN 2008 Chevrolet Epica 5-Speed S/R (D33)
MG1 HM-282
MG2 HM-282
MG3 Getrag F23
MJ1 Isuzu
MK7 Isuzu
MLM Y4M (2008 Chevrolet Aveo 1.6 DOHC)
MR3 Isuzu
MU3 Saab F25
MV2 Chevrolet Sprint
MY7 Early J-car

GM Continuously Variable Transaxles

RPO Trans Name Lowest Highest
M83 V20-E
M75 V25-E
M16 V25-E AWD

on Apr 15, 2015 | GMC Cars & Trucks

1 Answer

Whats the sensor that is under the distributor on a 1991 honda civic ex?.my car doesnt start without that. also from 1st to 2nd gear my car feels like it slips out of gear and shakes or something..does...


I think you mean the distributor ignition module
If you have an automatic transmission it probably
a vacuum advance valve/Sensor hose may be missing or
defective.You can probably find the manual at your local
library

Feb 11, 2011 | 1991 Honda Civic

1 Answer

Transmision starts out in 1st shifts to 2nd then third but will not shift into overdrive , but once it reaches 3rd gear ,it stays there when you come to a stop . after that it will only shift manually...


Sounds like your transmission is in limp mode. This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.

The other from what you described, trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Thank you for using fixya and have your Safari scanned for the DTC codes that would indicate what issues your transmission is having to put you in to limp mode.

Sep 21, 2010 | 1994 GMC Safari

1 Answer

Will not shift into 2nd gear on a automatic trans


Trans shifts into gear harshly, car feels sluggish off the line, No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmision is either in limp-home mode or has lost electrical power. If there are lots of error codes in the PCM, check the underhood fuse that powers the transmission, and if it pops again, look for a short in that circuit like an O2 sensor harness touching exhaust. Otherwise, check PCM codes for a particular fault in the transmission causing the PCM to put it in limp-home mode.

What is "limp-home mode" ? This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.

Thank you for using fixya and good luck

Apr 10, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Only runs in 1st and 2nd gear and reverse.


This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.

Trans shifts into gear harshly, car feels sluggish off the line
, No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmission is either in limp-home mode or has lost electrical power. If there are lots of error codes in the PCM, check the under hood fuse that powers the transmission, and if it pops again, look for a short in that circuit like an O2 sensor harness touching exhaust. Otherwise, check PCM codes for a particular fault in the transmission causing the PCM to put it in limp-home mode.

No 1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Car goes into gear but feels very sluggish like the brakes are dragging, but it will roll easily (starts out in 4th gear), you manually shift to 2 to get it moving, once it's moving you put it back in OD and the car shifts 3rd to 4th on its own and locks the converter at the appropriate time: ShiftB solenoid failed: Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Dec 14, 2009 | 2006 Hummer H3

1 Answer

I have a 97 f-250 7.3 with a manual trans. and it wants to jump out of reverse if I dont go to 1st gear and then to rev. first.


Sounds like the shift lever is not coming completely out of 2nd gear. So, by shifting into 1st gear, you recenter the shift lever. You can confirm this by going under the truck and moving the 1st - 2nd lever on the side of the transmission with your hand. If the shifter goes into reverse after you manually recenter the 1-2 lever, then you need to correct the problem that prevents the "normal" recentering of the 1-2 shift lever.

Possibilities are: Bent shift rod; worn shifter; worn shift rod at connection to shift lever on transmission.

Oct 10, 2009 | Ford F-250 Cars & Trucks

1 Answer

91 mazda protege, grinding lower gears?


More than likely the synchronizers are going out,they allow you to move from gear to gear without damaging transmission.

Apr 20, 2009 | 1991 Mazda Protege

1 Answer

Transmission slipping


you may have a bad sencer in the tran take it to a well nown tran shop and have them run a scan on it. to be truthful i pretty shore your tran is on its way out.

Apr 11, 2009 | 2000 Buick LeSabre

2 Answers

98 Civic Auto Trans Slippage


you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas

Dec 12, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...