Question about Mazda B-Series

Open Question

I own a Mazda Fighter. The problem with this car are: 1) Experiencing slight difficulty to engage the 1st gear when the car is in stationary position. 2) The car begins to **** when the car is about to move while i am releasing the clutch slowly. 3) I serviced the clutch recently (replacing the pump kits) 4) The clutch pump is quite heavy according a mechanic who service the clutch pump. Is it the sign of the clutch plate wearing off? Sifu! Please advice

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: RPM DROPS WITH CLUTCH RELEASE (TOYOTA CAMRY 2004 GLI)

IT HAS TO BE THE PROBLEM WITH THE SENSOR REPLACE IT
TO KEEP THE RPM STEADY WHILE U USING THE AC


Posted on Jul 09, 2008

  • 10 Answers

SOURCE: 2005 mazda 3 clutch won't engage

relpace the clutch pressure plate and throwoout bearing. It all comes in a clutch kit.

Posted on Feb 18, 2009

  • 6982 Answers

SOURCE: Hard Clutch and 1st and 2nd Gear Shifting is hard

The clutch bearing is supposed to have a groove on the inside where it slides on the shaft That groove is supposed to have a heavy grease applied to it to prevent the bearing running dry on the collar it slides on.Regardless of your driving style, that grease is intended to remain there for the life of the clutch, (generally every clutch I have ever replaced still had some remaining lube there unless the bearing itself failed from a material defect which caused it to overheat and cause that grease to then run out of the retaining groove) I'm not there and can't see the old parts, but in my opinion the first clutch may have failed partially because of your lack of skill in using a stick shift vehicle but the second failure obviously is not your fault if the information you have posted is correct.
Good luck

Posted on Apr 17, 2009

  • 617 Answers

SOURCE: the clutch doesn't release to engage gears

Does your clutch pedal stay down when pressed? sounds more like you have a bad pressure plate, means need clutch replaced

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear is stiff and experiencing a difficulty when engaging second gear. other gears seems to be fine but the shifting is not smooth.


I suspect that it will be in the shift mechanism
If it is a cable shift then replace the cable
If it levers or other linkages check and adjust or lubricate as required
I doubt it is in the clutch as you haven't mentioned difficulty in selecting first gear only shifting from 1 to 2nd.

Jun 21, 2015 | Opel Corsa Cars & Trucks

1 Answer

Not selecting 1st gear when stopping at lights


would need a drive to be honest to know whats wrong ,Now in my time cars had no syncro on first or second gear so you had to stop and be stationary to engage first gear which i still do if the cars moving abiet very slowly then i use second but a lot of modern cars like this have out of square engines unlike a old humber or morris with a long stroke engine and a starting handle for a flat battery morning.Now is this not going into gear when moving and ok when stationary or all the time ?

Feb 24, 2013 | 2005 Citroen C3 Pluriel

2 Answers

Prelude 2.2 vti W reg auto automatic tiptronic gearbox slipping


Hi there. Although the Dealer has changed the oil, did they do a 'Stall Test' whilst the gearbox was cold and again when at normal running temperture? If not, that's what they must do firstly. This will identify whether you have a slipping clutch/s. The Honda autobox also includes what is known as accumulators - these control how each clutch is engaged during acceleration. For example, if you are accelerating slighly/smoothly, you want each gear to be engaged gently and smoothly, whereas, when accelerating hard, you need the gear engaged quickly and hard to aviod clutch slippage. Thus, the fact that you are experiencing a hard engagement might mean that an accumulator/s is seized. If that's the case, it will mean that the autobox will need stripping, cleaning and be checked for worn components. Hope this helps, Scottech.

Apr 21, 2009 | 2000 Honda Prelude

1 Answer

2005 mazda 3 clutch won't engage


relpace the clutch pressure plate and throwoout bearing. It all comes in a clutch kit.

Feb 18, 2009 | 2005 Mazda 3

1 Answer

I have a problem engaging gear when the car is stationary, any ideas. ita a mazda 2 it isnt in the drop down box.


Hi it could be the selector plates or a worn gear linkage - worst case would be the clutch or the gearbox has given up, hope this helps

Dec 04, 2008 | Mazda MAZDA3 Cars & Trucks

1 Answer

Could not engage gear at a stop light; some grinding~finally into gear~couldn't engage 1st or 2nd; could manipulate gear shift without the clutch engaged! Parked vehicle overnight~next...


Sounds like low fluid in the hydraulic clutch system, look under the hood next to the firewall on the drivers side should be a small resevior with a black top. Remove the top and check the level, if it gets even slightly low this problem will occur. it takes dot 3 or 4 brake fluid. If it is not low it could be that your slave cylinder is going bad. Also you may need to change out the fluid in your transmission, recomended at 60,000 mile intervals.

Jul 28, 2008 | 1996 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...