Question about 1996 Ford Explorer

1 Answer

Can a faulty transmission case blow the transmission

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 44 Answers

If the case is damaged and allowing the loss of oil then it will cause damage to the geabox commonly known as ford exploder due to comon problem with the gearbox /transfere case failure of internal components

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse # 21 blows when igtion turned on.what causes this?


Whatever accessory or system is powered by fuse #21 has a short. It only blows when the ignition is turned on because no power goes to the fuse with the ignition off. If your transmission is in limp in mode, you need to have it checked. You don't mention make, model, or year vehicle, but your car may have a separate transmission control module (TCM); in any case see if you have any codes that indicate if there is a problem with the transmission. The O2 sensors have nothing to do with the transmission being in limp in mode, and I doubt that they are connected directly to the fuse. Most O2 sensors get their power through the PCM.

Oct 25, 2016 | Cars & Trucks

1 Answer

P0701 and p0704


Unfortunately the 0700 series of numbers relate to the transmission. Code ( P0701) is pushed by 1- Open or short transmission control system circuit. 2 - Poor transmission control system electrical connection. 3 - Check powers and grounds to Transmission Control Module (TCM). Code P0704 is pushed by 1- Faulty Clutch Switch.
2 - Misadjusted Clutch Switch. 3 - Clutch Switch harness is open or shorted. 3 - Clutch Switch circuit poor electrical connection. 4 - Faulty Engine Control Module (ECM). But I'm guessing you have an automatic trans. right. If so I would look at the (DTR) digital transmission range sensor.

Nov 26, 2013 | 2004 Ford Expedition

1 Answer

1999 Cheverolet No power?


many things cause low power.faulty spark plugs and wires,faulty ignition coil.transmission slipping due to low fluid level plugged filter,clutch slipping if you have manual transmission,clogged fuel filter.low cylinder compression leaking valves or blowed head gasket.engine overheating could have restricted exhaust system.

Jul 14, 2013 | Cars & Trucks

2 Answers

Transfer case keeps blowing gaskets


I need a bit more information I take it this a 4x4 cause when you talk about transfer case it means 4x4 and am I to understand you replaced the transmission and transfer case and tail shaft?

Jan 16, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

My 76 K10 4x4 with an automatic let go , transmission is no leaking just the front of the tansfer case is covered in oil the car lost allforward mobility.


I think you have lost the transmission, they overheat when they fail and then blow all or most of the fluid out the breather on the top or the dipstick tube.

Nov 05, 2012 | Cars & Trucks

1 Answer

Fuse for the dash keeps blowing on 2001 kia sportage when car is put in nuetral or drive, fine for reverse will also blow when put into park from drive, wil also blow when coming to a stop


SOUND LIKE YOU HAVE FAULT IN THE TCM OR PCM.THE TRANSMISSION SHIFT SOLENOID FAULTY. YOU NEED A GARAGE OR TRANSMISSION SHOP TO USE DIAGNOSTIC EQUIPMENT TO LOOK FOR TRANSMISSION FAULT CODE SINCE TRANSMISSION IS TCM AND PCM CONTROLLED.

Jun 13, 2011 | 2001 Kia Sportage

1 Answer

Over heating and high fuel consumption.it only runs 10k per liter


Hi and welcome to FixYa!

As a first course of action please check the following:

- Check if the radiator blower blows strong. If it blows weak then it can be the cause of overheating, you will need to replace the blower motor if that's the case.

- Check if the coolant sits on the proper level, if it doesn't then fill it up to the max level.

- Transmission fluid burnt. If the transmission fluid is burnt, the shifting will be slow which may result to stress to the engine, very good reason why it overheats and has poor mileage. You will need to replace the transmission fluid if that's the case.

Hope this helps and thank you for using FixYa! Have a good one!

Feb 15, 2011 | 2002 Kia Sportage

1 Answer

I have a 2002 dodge durango 5.9L went and started to warm up one morning started fine came back out and truck was off and wouldnt restart, replaced pump cuz i had no fuel pressure at rail, relay is good,...


Possible causes Faulty Transmission Control Relay Transmission Control Relay harness is open or shorted Transmission Control Relay circuit poor electrical connection Faulty Transmission Solenoid/Pressure Switch Assembly

Read more: https://www.engine-codes.com/p0888_dodge.html Transmission No Shift Case Study P0888

Jul 20, 2017 | 2002 Dodge Durango

2 Answers

2002 yukon front end wont engage


2002 GMC Yukon

2002 GMC Yukon

2004 TRANSMISSION Transfer Case - NVG 149-NP (One Speed Automatic) - SUV

2004 TRANSMISSION Transfer Case - NVG 149-NP (One Speed Automatic) - SUV

TRANSFER CASE NO FRONT DRIVE

Transfer Case No Front Drive

Cause

Correction

DEFINITION: The transfer case is not delivering engine torque to the front propeller shaft.

Review the Symptoms - Transfer Case and perform the necessary inspections.

Viscous coupling faulty 1. Inspect the transfer case fluid for being black. If the fluid is

black, it is most likely caused by a viscous coupling failure.

2. Test for a faulty viscous coupling. Refer to Transfer Case

Description and Operation.

3. Disassemble the transfer case. Refer to Transfer Case

Disassemble in Transfer Case - NVG 149-NP3 Unit Repair.

4. Inspect the viscous coupling for a bulged cover. Refer to

Cleaning and Inspection in Transfer Case - NVG 149-NP3 Unit

Repair.

5. Replace the viscous coupling if it is faulty. Refer to Transfer

Case Assemble in Transfer Case - NVG 149-NP3 Unit Repair.

Planetary carrier faulty 1. Disassemble the transfer case. Refer to Transfer Case

Disassemble in Transfer Case - NVG 149-NP3 Unit Repair.

2. Inspect for faulty planetary carrier components. Refer to

Cleaning and Inspection in Transfer Case - NVG 149-NP3 Unit

Repair.

3. Replace any faulty planetary carrier components. Refer to

Transfer Case Assemble in Transfer Case - NVG 149-NP3 Unit

Repair.

Oct 19, 2010 | GMC Yukon Cars & Trucks

1 Answer

I have a problem with the brake litesthe shifter does not come out of parkand now it wont start. The starter and battery sound strong just wont turn over could they all be connected with the brake pedle...


CHECK BRAKE LIGHTS FUSE.IF FUSE OKAY.BRAKE LIGHT SWITCH IS BAD.VECHICLE NOT SHIFTING OUT OF PARK PROBLEM COULD BE BLOWED FUSE OR CLUTCH PEDAL SWITCH FOR MANUAL TRANSMISSION OR TRANSMISSION RANGE SENSOR FAULTY AND PROBLEM IN BRAKE LIGHT SWITCH IF FAULTY IT WILL KEEP THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID FROM WORKING KEEPING YOU FROM GETTING VECHICLE OUT OF PARK.IF BRAKE SWITCH IS GOOD.PROBLEM IN THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID.

Jul 16, 2010 | 2002 Ford Mustang

Not finding what you are looking for?
1996 Ford Explorer Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...