Question about 1996 Isuzu Rodeo

2 Answers

Is it right or left hand thread on harmonic balancer (1996 rodeo)

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,508 Answers

Right hand thread, very rare to find any left hand threads since the 50s- 60s( left side bicycle pedals are one of the exceptions)

Posted on Apr 06, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 5,370 Answers

The harmonic balancer should loosen in the CCW direction. Turn the bolt to counter clock wise direction.To tighten the bolt turn in clock wise direction. -------------- This should help.Thanks.Helpmech.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Harmonic balancer bolt on 2001 impala


Looking at the front of the engine, the harmonic balancer turns clockwise when running. You will need to turn the bolt anti clockwise as it is a normal right hand thread.

Mar 17, 2014 | 2001 Chevrolet Impala

1 Answer

Harmonic balancer bolt turn left or right to remove


Right hand thread righty tighty lefty loosey. some require a impact wrench 1/2 or 3/4 drive to loosen if either not available the install socket with breaker bar leaving 6 inches of slack between bar and frame crank engine sometime this will loose bolt. you hear a BIG bang as it loosen.

Nov 07, 2013 | 1995 Lexus ES 300

2 Answers

Need to replace the harmonic balancer in a 1994 isuzu rodeo. ( rwd, 3.2 ltr v.6 ). no success so far. is the main bolt reverse threaded? so far i have been attempting to turn it toward the passenger side,...


No, the bolt is not left handed. You do need to turn it counter-clockwise to loosen it. You're probably just spinning the engine when trying to loosen it. I use a 6" c-clamp and attach it behind the balancer in a way that the threaded shaft can lodge up against something so the engine can't turn. Then I use a 3 lb rubber mallet and hit the 1/2" drive rachet on the handle, or put a breaker bar on the end of it and work it loose that way. Once you get the bolt off, you will need to use a pulley puller to get the balancer off.

Mar 19, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

1999 mercury villager 3.3, harmonic balancer bolt size


27 mm ...right handed(normal thread) which should torque to 160 ft/lbs

Jul 06, 2009 | 1999 Mercury Villager

1 Answer

Is the bolt on the harmonic balancer on a 1995 isuzu rodeo 6 cyl. 2 wheel dr. a left handed thread ?


i just replaced mine and it loosen to the left...so you will need a impact and atleast 1/2" drive and 140 to 180 psi to break it free

May 16, 2009 | 1995 Isuzu Rodeo

1 Answer

Harmonic balancer bolt direction for loosening??


CCW , and your going to at least put the new timing belt on and balance to check for compression. you can run an engine without the covers installed or accessories hooked up

Feb 05, 2009 | 1996 Isuzu Rodeo

Not finding what you are looking for?
1996 Isuzu Rodeo Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...