Question about Chevrolet Venture

1 Answer

I have misfrie in cylinder 5 just want to no were it is

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 44 Answers

If its a v6 they have the cyliders numbered 246 on one side and 135 the other that would make it one of the rear cyl a v8 is 2468-1357 this will make it the third cylinder from the front on one side or the other. if you look on the inlet manifold it should have the cyl numbers cast onto it or check distributor cap or coilpack for numbers and follow the plug lead for that cyl the leads may be numbered as well

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfire on #5 cyl


2005 Dodge Grand Caravan 3.8L engine misfire on cylinder 5.

answers.edmunds.com > Edmunds Answers
Aug 14, 2012 - MIL on; cylinder 5 misfire; most noticeable at idle in gear ... This could be caused by an EGR valve that is sticking partly open and not closing ...

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305
A P0305 code means that the the car's computer has detected that one of the engine'scylinders is not firing properly. In this case it's cylinder #5.

ODB Code P0305- Misfire in #5 Cylinder - 2008 Dodge ...

repairpal.com > ... > Grand Caravan > 2008 Dodge Grand Caravan
Feb 22, 2011 - ... do something with a misfire in the #5 cylinder of my V6 4.0L engine. ... ODB Code P0305- Misfire in #5 Cylinder on 2008 Dodge Grand Caravan .... My2005 dodge grand caravan jerks when it shifts into gear what could it be.

My Dodge Grand Caravan has a Cylinder 5 Misfire,? ' Yahoo An


Dec 05, 2015 | 2005 Dodge Grand Caravan

1 Answer

I fixs my misfrie and my car run good but egnile light is on


If it was built after 1996 you have to clear the trouble code with a scanner or code reader to turn the light off.

Jan 20, 2014 | Oldsmobile Cars & Trucks

1 Answer

Truck ran 160 miles fine then went bad found plug wires were switched how did it get that far


Someone switched them would be my guess. Used to pull that one on my best friend.

Oct 01, 2012 | Cars & Trucks

2 Answers

98 expedition 5.4 4x4 with dual a/c..sputters and shakes while idle and driving...please help me ! i have replaced 5 of the 8 spark plugs till i can get to the back 3 (pain in the ****) no change not even...


When you know the symptom who needs codes?And if there was a code it probable say lean bank 02. why simple you have a misfire. the smell rich exhaust the shake and sputter in drive. 2 causes the Expedition suffer from ,An open EGR valve.If you can change a fuel filter and change a spark plug you can test this. when the engine is running and misfire at idle and the vehicle is warmed up and at operating temperature. Turn off engine. Go to the EGR is it hot to touch. because if it is it open and this the the culprit.Another misfrie is from COP (coil on plug.)When you change the spark plug where any of the spark boot torn or worn that spark can go through. Or even a faulty COP will do this .To find it you have the engine running and lift one COP out of the cylinder and listen for a engine drop if the engine RPM drop the COP is good if no change in engine the COP is bad. By the way 600rpm in drive is low

Feb 27, 2012 | 1998 Ford Expedition

1 Answer

Acura mdx 2001 ingine codes p1399 andp300 as well others codes 305


All these codes indicate you have a misfire on cylinder number 5.
P1399/P0300 - Random/Multiple Cylinder Misfire Detected
P0305 - Cylinder #5 Misfire Detected

Causes:
- Improper spark plug at cylinder #5
- Insufficient compression at cylinder #5
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5
- Fuel injector #5 may be faulty
- Intake air leak at cylinder head

Solutions:
- Perform Injector Service
- Replace Spark Plug #5
- Replace Injector #5
- Replace Ignition Coil #5

Mar 09, 2011 | Acura MDX Cars & Trucks

2 Answers

Were is the #5 sparkplug


CYLINDER 5 IS LAST CYLINDER IN THE BACK TO THE FAR RIGHT ON DRIVER SIDE.SEE FRONT CYLINDER LEFT TO RIGHT 2 4 6 BACK CYLINDERS LEFT TO RIGHT 1 3 5 NOW IF YOU HAVE 89 IF YOU GOT 1989 MODEL ENGINE 3.1 V6 ENGINE FRONT CYLINDERS ARE 1 3 5 AND BACK CYLINDERS IS 2 4 6

Jan 29, 2011 | 1992 Chevrolet Lumina

1 Answer

What is the firing order on my 1992 Pontiac Transport. Also, which side of the block is cylinders 1-3-5 and 2-4-6.


FIRING ORDER 3.8L ENGINE IS 1 6 5 4 3 2 1 NOW CYLINDER POSITION.STANDING IN FRONT OF VECHICLE FRONT CYLINDERS LEFT TO RIGHT 6 4 2 BACK CYLINDERS LEFT TO RIGHT 5 3 1 FOR THE 3.1L ENGINE FIRING ORDER IS 1 2 3 4 5 6 STANDING FRONT ENGINE FACING DISTRIBUTOR LEFT CYLINDERS FACING YOU 6 4 2 ON THE RIGHT SIDE CYLINDERS 5 3 1

Jan 12, 2011 | 1992 Pontiac Trans Sport

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck


P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Jan 02, 2011 | Ford Escape Cars & Trucks

1 Answer

Cylinder 5 misfire were is tha cylinder


CYLINDER NUMBER 5 IS STANDING IN FRONT OF VECHICLE IT WILL BE THE 5 CYLINDER COUNTING FRONT TO THE BACK CYLINDERS IS IN ORDER 1 2 3 4 5 6 THAT YOUR CYLINDER ORDER. YOU HAVE A INLINE 6 CYLINDER ENGINE.YOUR MISS FIRE COULD BE THE COIL - SPARK PLUG - CLOGGED OR FAULTY FUEL INJECTOR. ALSO INTAKE MANIFOLD VACUUM LEAK OR SLIGHT HEAD GASKET LEAK WILL CAUSE MISFIRE.

May 06, 2010 | 2002 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...