Question about Oldsmobile Cutlass Calais

Open Question

How do i change front wheel bearing on a WH holden statesman

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 124 Answers

SOURCE: noisy front wheel bearing

Yes the bearings can be changed on this truck. The bearing races will need to be removed from the rotor to do this use a punch and hammer once the rotor is removed. You will need inner bearing and race, outer bearing and race, and a seal, plus grease to pack the bearings. The hub on these trucks is the rotor. Please rate.

Posted on Dec 12, 2008

emissionwiz
  • 75822 Answers

SOURCE: Change front wheel bearings

u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

3bcf37f.jpg

Posted on Mar 12, 2009

  • 187 Answers

SOURCE: front wheel bearing

This job is more than a none mechanic is able to do easily.

Posted on May 09, 2009

  • 832 Answers

SOURCE: change of wheel bearing front left side

Just a few hundred dollars. Think of the bearing
cost, plus labor and overhead.

Posted on Sep 21, 2009

  • 543 Answers

SOURCE: 1996 saturn sl front wheel bearing assembly

you got to press it in and out,and if u dont do it right with the proper tools you will wreck the hub

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 WH Statesman. 2001 VX SS Commodore


every possibility that it will as the statesman is just a glorified commodore any way
GM holden used as many common parts as possible to keep prices down

Oct 10, 2016 | Cars & Trucks

1 Answer

How do u replace or fix a bent shock absorber tower on a 2001 Wh Holden statesman


with bodywork either need the equipment that a body shop carries torches-frame racks-hammers dollies[for small stuff]-and unibody tower will cause other areas to be bent =or take to a body shop for estimate

Aug 25, 2016 | Holden Cars & Trucks

1 Answer

I have a LS1 gen3 in a wh holden statesman, the cluster works but the speedo doesntwhen tested on tech 2 i had speedo to the cluster but not to speedo on cluster.please help


More than likely the tiny electric motor that moves the speedo needle has failed, very common issue on GM cars and trucks.

Jul 06, 2016 | Holden Cars & Trucks

1 Answer

I need the rear suspension adjustment figures for wh statesman


From the Holden Service CD:

The toe-in specification is deliberately quoted as an angle because wherever possible toe-in should be measured in degrees. Refer below for the recommended wheel alignment settings. These settings are at curb weight, which is the vehicle
in a condition of full fluids, full fuel, no people or luggage.


Front Toe-in Degrees Total 0°10' ± 0°10'
Degrees Per Wheel 0°05' ± 0°5'
Camber - 0°30' ± 0°20'
Caster 7°45' ± 1°15'

Rear Toe : 0 ± 1mm (0°± 0?10mins)
Camber : -1°30mins to -2°30mins
Torque Settings : 65 ± 5Nm

Jun 29, 2016 | Cars & Trucks

1 Answer

Vacuum diagram wh L67 1999 holden statesman ?


I've just put L67 vacuum lines into "images" on bing and got all sorts of pictures, start there?

Nov 15, 2014 | Cars & Trucks

1 Answer

I have a gen 3 wh Holden statesman how do you know if the O2 sensors are bad?


Look at scan tool data

Test them with an oscilloscope

Replace front sensors at 100,000 miles

Replace rear sensors when they set a MIL Lamp
or converter overheats & ruins them

Apr 30, 2014 | Cars & Trucks

1 Answer

I have wh Holden statesman that recently just started playing up when I'm at a standstill at the lights I feel the car like it's going to die out then when I begin to drive it starts making clanking n


if its loud knocking noise at idle from front area of motor possibly crank pulley has separated from rubber.
when motor is not running can you grab the serpentine belt and move it along rotate it from left to right side of vehicle until it clunks to a stop which is the saftey lugs on the inside of the crank pulley, turning the pulleys?
if so the crank shaft balancer needs replacing
if you cant turn belt over by hand its ok and could be an internal motor issue, big end or camshaft bearing failure were the other common faults

Mar 29, 2014 | 1999 Holden VT

1 Answer

Wh won't start all the time


you shold check your battery first
__________
x-vci tool

Sep 17, 2012 | 1992 Holden VQ Statesman

1 Answer

Wiring color code for steering wheel controller for a wh statesman


We do not have wiring diagrams here at fixya, sorry.

Aug 25, 2012 | Holden HSV Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...