Question about Volkswagen Polo

Open Question

97 polo 1.4 cl. engine cut out will not restart.fault code 0533 displayed.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 163 Answers

SOURCE: VW Polo Map sensor fault code idling pooly

Check for air leaks in the admission system...

Posted on Apr 02, 2009

mecanica03
  • 881 Answers

SOURCE: check engine light

ok, first to do ,replace the speed sensor this causes odometer not working,check and d4 lights on

Posted on Apr 17, 2009

  • 22 Answers

SOURCE: n reg vw polo engine cuts out at junctions when headlights are on

first clean throttle body out with carb cleaner and some clean cloth , if the throttle flap is dirty the car will stall

Posted on Apr 17, 2009

  • 34 Answers

SOURCE: will a 99 vw polo 1.4 cl engine fit the 98 polo

if the bodywork is the same then yes if its the newer shape then maybe.

Posted on Sep 30, 2009

  • 21 Answers

SOURCE: MY VW POLO SHOWS FAULT CODE ; P0106 ABSOLUTE MANIFOLD PRESSURE SE

this a map sensor, probably just need the sensor replaced, it measurese intake vaccum and adjusts air/fuel mixture accordingly

Posted on Oct 07, 2009

Testimonial: "MANY THANKS TO HONDABOY 47. SPOT - ON. PROBLEM SOLVED!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 2005 model 1.4 polo TDI, and sometimes when i'm driving it would cut power but still drives not with the initial power it had before, what could be the problem?


You need to have a Diagnostic test done by plugging in a fault code reader to determine the cause of the fault. The car will be going into limp home mode ie engine management light on it reduces engine performance. if you have a yellow spanner symbol then the likely cause is due to one of the engine electrical components such as the egr valve solenoid or maff (air flow meter)

Oct 18, 2016 | 2005 Volkswagen Polo 1.4

1 Answer

I have a 97 ACURA cl 2.2 and when I start my engine it the rpm idles to 1. Why is that?


unless the car is at operating temperature , the engine rpms on start is hiogher the at run as the ECM has a higer setting for idle ( like having a choke out a bit ) until the engine checks are done and then it settles back
best run the fault codes to check for faulty sensors

Apr 24, 2015 | 1997 Acura CL

1 Answer

My polo idles but cuts out when I drive


Have you tested it for fault codes? Please have the system scanned for fault codes first.

Apr 26, 2013 | Cars & Trucks

1 Answer

97 acura cl shuts off when i go faster then 20 mph


some computers have a built in system that limits engine rpm to low speeds when an engine overheat occurs( Ford). Check for such a code. Check that there is water in the radiator and that the temp gauge is working

Jan 13, 2013 | 1997 Acura CL

1 Answer

Have VW polo 1.4 CL (APQ engine code) registered in 1999 with Fault code 00525. Car difficult to start and when it does cuts out when accelerator is depressed unless left to run for a minute or two. Car...


first make sure you have no close in silence ( catalatic ) exhaust line ) , second make sure the Oxgen sensor is connect (lambda) ,and the timing is ok. intake manufold sensor remove and clean , for catalatic you can loose bolts only to check and accelerate.good luck.

Jul 13, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

VW POLO 1.4 FSI AXU ENGINE. FAULT CODE 17439 - 16575. LACK OF POWER.


it is either fuel pressure sensor g247 or fuel pump fault

Nov 23, 2010 | 2012 Volkswagen Polo

4 Answers

I replaced EGR valve on my 97 Acura 3.0 CL after


I am fixing to change my EGR valve and the piece of paper that came with the part say this:

Important Notice
Before installing this part, check the EGR valve passage in the intake manifold and clear any carbon blockage. Failure to do so will result in repeat malfuntion of the EGR valve system. Refer to a technical service manual or contact a service dealer for proper cleaning procedures.

Hope this helps.

Aug 02, 2009 | 1997 Acura CL

1 Answer

Will a 99 vw polo 1.4 cl engine fit the 98 polo 1.4 cl car


if the bodywork is the same then yes if its the newer shape then maybe.

Apr 19, 2009 | 1998 Volkswagen Golf

1 Answer

N reg vw polo engine cuts out at junctions when headlights are on


first clean throttle body out with carb cleaner and some clean cloth , if the throttle flap is dirty the car will stall

Apr 14, 2009 | 2001 Volkswagen Golf

4 Answers

VW Polo Map sensor fault code idling pooly


Hi, I have a 2001 polo 1.4 mpi it lackes power when you hit a hill it just dies, It has had new cat, fuel filter, fuel pump and throttle body, but is still the same it just dose not want to give me full rev's?

Mar 30, 2009 | 2002 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...