Question about Chevrolet C1500

1 Answer

I did a head gasket repair and now i need to set timing for a 350 chevy i can get it running but idles ruff

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Its hard to say without knowing your year, however, if you have an engine that uses a distributer, the best way is to remove your timing cover, and insure the timing mark are alighned and that your distributer is set to the #1 cylinder tdc, from there it should be a mater of small adjustments to the distributer. hope i was able to help.

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removel of injectors 1991 chevy 350 c.i. pick up


This repair is not that bad. ***NOTE: don't disassemble the TBI unit until you have purchased a new TBI gasket. The gasket is paper and when you remove the screws and pull the top half away, the gasket will tear.*** Remove the air cleaner housing and you will see the T.B.I. unit. Unplug both injectors, remove the torque head screws, and carefully pull the top have of the injector housing away. You now can remove the injectors. Just in case you don't know. If the fuel pressure regulator is original, this would be the time to replace it. I hope this helps, let me know how it went.

Feb 11, 2014 | Cars & Trucks

1 Answer

What causes an 89 chevy with a 350 tbi 700r4 to stall when u put it in gear


Could be fuel filter,air filter,dirty throttle body.

Jun 12, 2013 | Cars & Trucks

2 Answers

Just replaced blown head gasket now the car takes a long time to start and when it does it runs very ruff at idle but at 1500 rpm it levels out


did you have the heads milled or just throw a set of gaskets on it?You did put new spark plugs in it rite?

Feb 16, 2013 | Cars & Trucks

1 Answer

1985 Chevy: engine was idling, then i shut it off, when i went...


remove spark plug were the water was at. put your finger over the hole without burning yourself. have someone to turn the engine over a few times to see if more water comes out. try this on both spark plug holes one at a time. if you continue getting water from each plug hole then i would say you have a blown head gasket or maybe both depending if both plugs came from the same side,if not then both head gaskets are leaking. that problem would also make the truck or car run ruff/missing/hard to start. hope this will help you.

May 03, 2010 | Cars & Trucks

2 Answers

Rought idle


There is a tester you can use that screws on the radiator cap and you can pump it up to see if it has a leak down effect in the system.. This wont tell you where its exactly going but tells you if there is a leak in the head or intake gasket.. probably should start with the intake and replace it and see if it does the trick .. if not then tear it down and replace the head gaskets and or check heads for cracks also.. thanks Jerry

Apr 21, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1989 chevy 350 automatic, white smoke


white smoke is antifreeze try checking the compression

Nov 08, 2008 | 1989 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...