Question about 2002 Hyundai Accent

1 Answer

Check engine light blinks 4 time and then turns off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 143 Answers

You ned to go to auto zone or advance auto and have your codes read fix the first code first them the second if you live aroud a harbor freight you can buy a scan tool there to read the engine code and clear the code

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Iturned ignition key on off on off on off,and,check engine light blinked twice,then twice again,then blinked five times,then four times,then five times,then five times,can you tell me what that means


This may have altered the programming of the alarm or ignition cutout. Your car may have a body control module which may have been altered. It may be more helpful if you specify more details including what model car you have and if it has an alarm or engine immobiliser.

Nov 05, 2014 | Cars & Trucks

1 Answer

Blinking check engine light


its most likely an ignition coil. you are probably getting a spike in the electrical system. my lincoln ls does the same thing sometimes. the check engine light wiill blink for awhile then stop, and eventually it will stay on and run rough. every single time it turned out to be an ignition coil.

Nov 30, 2011 | 2002 Isuzu Axiom

1 Answer

Brainbox light comes up on the dashboard after driving few kilometres. I change it with another one but still the same problem. Toyota camry 1994 model.


Well, that's the check engine light I think. It is saying something is not normal. You can read out a trouble code to give you an idea of why it is on. Turn the ignition on, but engine stopped, and with a piece of wire bridge terminals TE1 and E1 in the service terminal box, at one rear corner of the engine compartment.

The check engine light will then blink. A steady blink 4 times per sec is "all normal".

Trouble codes are 2 digits, and these will be blinked - first digit - pause - second digit - repreat.

So the oxygen sensor fail code (a common one) is 21, and will show 2 blinks - pause - 1 blink - repeat.

There are 22 of these codes

Nov 18, 2011 | 1994 Toyota Camry

2 Answers

Toyaota Camry 1994 engine won't start, Engine light on


I would check for fuel,(pressure and injector pulse), spark, and compression, before checking any codes. Lack of any of these basics can result in codes, and then you waste alot of time chasing a symptom, instead of the actual problem.If more people followed basic diagnostics, which always come back to these three basics, rather than chasing codes first,they would find no starts much more quickly.

Nov 14, 2011 | 1994 Toyota Camry

1 Answer

Flashing S button 1991 Honda accord


the flashing S light on your car is your tcu "transmission control unit" sending a trouble code to your dash this could mean alot of differant things if im not mistaken it will be an electrical problem not mechanical. is your speedometer just randomly jumping? the reason i ask is i drive a 91 as well and my S light is blinking and my speedometer jumps and sometimes doesnt work at all the the code for the S or tcu is 4 which is the vss "vehicle speed censor" eventually your check engine light will probably come on and if the code is 17 then its your vss as well but you can check the code by getting either a paper clip or small wire and using it as a jumper wire there is a little blue wiring harness on the passenger side of your car under the glove box use the paper clip or wire and plug them in "dont worry you wont get shocked ive done this plenty of times and in the rapair manual it tells you to do this" when you do this make sure the paper clip or wire is secure and put you key in the ignition and turn it to where your dash lights up but dont start the car the S light will start to blink count the blinks "1 long blink is 10, 1 small blink is 1" example if the light stays on for a couple of seconds and turns off and then blinks 4 times that would be code 14, if your check engine light blinks count that as well if you need help with checking any of it there is a video on you tube i believe the title is how do you check the check engine light on a 91 honda accord. or something of that nature. if you get the codes tell me what they are I may be able to find them and get more specific about what is goin on I hope this helps

Oct 18, 2011 | 1991 Honda Accord

2 Answers

Error codes for 1991 dodge spirit


Turn the key to run then off, back to run, then off, then to run and leave it on. The check engine light will be on and will then go off and then on again according to the codes the engine controler happens to have in it. If the check engine light was on when you stopped the car, then there is at least one code in the controler. The light will blink the codes like this.
Cycle the key three times and leave on on the third time. light on for about 3-4 seconds then goes out for about 2 seconds and then blinks one time and goes out for 3 seconds this is for the no.1. Then the light blinks 3 times and goes out for about 3-4 seconds. You have the code 13. You could have a whole string of codes in the controler memory. It could be something like this. key cycled 3 times, light on for 3-4 seconds, then blinks 1 time, pause, 3 times, longer pause, 2 times ,pause 4 times, longer pause, then 5 times, pause 5 times the goes out.
This is code ; 13,24, 55. code 55 isn't really a code. It just tells you it's the end of any codes the controller has.
If you disconnect the battery and hook it back, you will have code 13 which simply mean 'battery disconnect'. It will errace it's self after several starts if it's not disconnected again. If you cycle the key and you get 55, this means there are no codes recorded at this time.
You will allways get 55 when checking for codes wheather there are fault codes or not. The light on for a few second before the codes start flashing is only a bulb check. Some codes like 13 will not turn the check engine on, but but will leave a code for diagnostic purposes only. If you have the check engine light on and accellerate and the light begains to blink, then the controller is telling you that you have an engine miss and are running the chance of burning out you're catalatic converter if you continue driving. Sometimes its advised to disconnect the battery after you have recorded the codes.
This will erase all codes that are present but were generated by conditions that aren't pertanent to the present condition. and then the codes that come back are the real ones to address.
This link: http://minimopar.knizefamily.net/fault/index.html
Contains the entire list of Chrysler Engine Error Codes.


Mar 03, 2011 | 1991 Dodge Spirit

1 Answer

How can i check the code for the check engine light without using a meter. I hear there is a way to check the number of times the check engine light blinks with a manual procedure. I have the codes just...


Turn the ignition switch on off on off on off on. After the third time the check engine light should start blinking codes. It will start with 12. That is the start of codes code. It will end with 55. That is the end of codes code. You just want to know what codes are inbetween 12 and 55

Apr 08, 2010 | 1992 Chrysler Lebaron

2 Answers

96 lexus es 300 blinking check engine light


Hi there;

#4 Miss-fire. All the things you are saying make a lot of sense. When the light is blinking the cylinder is actualy misfiring, & the smell you are smelling is the fuel that is not burning in the engine burning in the exahst. This can cause a lot of damage to the exausht if it is not repaired..
There is still a couple of things that need to be checked, first he needs to check to see if it is possibly a fuel injector that is sticking. He can do this easily by moving the #4 injector to another cylinder & run the car. When it starts missfiring he will need to see if it is still #4 or if it is the cylinder that he moved the injector to. if it is the new cylinder it is obviously the injector, if it is still #4 he will need to look into the possibility of the EGR valve sticking open or some other issue to do with valve timing or low compression.
I hope this helps
Farrout!

Mar 17, 2009 | 1999 Lexus ES 300

2 Answers

Reset check engine light


First of all, you should'nt do this unless you know what the problem is.. or what tripped it. I had this problem when my husband and I were replacing a head unit and disconnected the old head unit, a/c and other stuff then turn the car on. This made the light flash. The first time we took it in and got charged $50 to reset it. The second time we did this procedure and it worked.

ECU Resetting Procedures

Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON.
A stop watch or an analog clock with a second’s needle will be useful.

Reset Check Engine Light Procedures

1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds.
2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds.
2a. Fully depress the accelerator pedal (HARD).
2b. Fully release the accelerator pedal.
3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.
4. Fully release the accelerator pedal (while the CEL is still blinking)
5. Wait about 10 seconds.
6. Fully depress the accelerator pedal and keep it for more than 10 seconds.
7. Fully release the accelerator pedal (The CEL light will continue to blink).
8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone.

If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU.

-Christine

May 15, 2008 | 2007 Nissan Murano SE

Not finding what you are looking for?
2002 Hyundai Accent Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...