Question about 1994 Suzuki Sidekick

1 Answer

Blower motor only has one speed suzuki side kick 1994. How can this be fixed

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

There is a resistor that cost about $12, you can purchase it at an auto parts store, what it does is the lower settings, when it goes out the high setting is the only one that works. Hope this Helped Tim

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1994 acura legend ac only works if i turn it on full blast


High speed only is caused bu a defective blower motor speed control solid state resistor. The resistor is located in the air ducting (for cooling) next to the blower motor under the dash on the passenger side of the car. Remove the lower dash panel to access the part. See picture below of resistor.
Cost for part is about $200.00
7_12_2012_7_34_53_pm.jpg

Jul 12, 2012 | 1994 Acura Legend

1 Answer

My blower motor went out how do y replece it and where is it located


Blower motor is on passenger side under dash. Disconnect neg side of battery then then blower motor wires and hose. Should be 5 screws holding in motor - remove. May need to take out glove box and kick panel to give you more room. Disconnect ECM wiring and bolt from right side of instrument panel. Gently pull down instrument panel and remove blower motor and fan. Install new motor and fan. Hope this helps - let me know. Thanks.

Jan 03, 2011 | 1994 Chevrolet C2500

2 Answers

F150 1997 ford heater fan only blows on hight


Plan on finding a melted blower motor resistor. Usually when the blower goes single speed, the blower motor resistor is the cause.

You can find it on the passenger side, looking up behind the dash / Glove box area.
In this picture the passenger side kick panel ( where the inertia fuel switch is at ) is on the right hand side of the picture.
e599ffb.jpg

This is what it might look like when you get it out :
76bb5d6.jpg
The blower motor only has the 1 fuse and blower motor relay on it. If it works on high, those are OK..

Parts should be less than 75.00 total from a dealer, and it is a metric socket and lay on your back on the passenger side floor repair, real easy and quick.

Nov 16, 2009 | 2004 Ford F150

2 Answers

The fan switch only works on high speed. The A/C kicks in but no fan except high


mine did the same thing - there is a wire harness on the passenger side that passengers kick with there feet - this can be jiggled and the fan wil start working on all speeds in my truck - hope your fix is as simple

Oct 13, 2009 | 2006 Chevrolet Colorado

1 Answer

No air comes out when I turn the AC on! I can


check the blower fan speed resistor

Aug 19, 2009 | 1994 Honda Accord

1 Answer

94 Celica Heater not blowing


Could be a blown fuse for the blower motor or the blower motor itself is worn out. There is also a blower motor resister pack that could be at fault--it has three resisters in it that vary the blower speed--but it would be unusual for it to fail in such a way that the blower stops. Usually it just gets stuck on one speed. However, the resister is located down near your feet on one side (I forget which for that model) and if the wiring connector becomes unplugged (from an accidental kick), then the blower won't work.

Feb 21, 2009 | 1994 Toyota Celica

1 Answer

Erratic Blower Behavior


The blower motor resistor can cause eratic behavior and the loss of some speeds and not others. I would check this first before replacing the motor.

Dec 08, 2008 | 1994 Pontiac Trans Sport

1 Answer

AC Blower Not Working


After some years, the the filters (made of foam) in the HVAC system can become dry-rotted. Debris from the rotted foam, as well as dust, can accumulate in various places within the system. Unfortunately, the motor housing of the blower is one place in which the dust and debris accumulate very well. To fix the problem, you have to remove the cover from the blower, and vacuum clean it. The blower is behind the glove box, on the lower right side.

A word of caution: The fan cage (which looks like a gerbil wheel) can become brittle, over the years. After cleaning out the blower motor, the blower will be able to freely spin at full speed, again. This may be too much for an old brittle fan. If your old blower can't take the force of spinning at full speed, you will hear it break apart inside its chamber. I discovered this, the hard way. After cleaning the dust and debris from my Volvo's blower motor, the blower spun at full speed and the fan broke apart. So, I had to buy and install a whole new blower.

Jul 03, 2008 | 1994 Volvo 960

Not finding what you are looking for?
1994 Suzuki Sidekick Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...