Question about 1993 Isuzu Rodeo

1 Answer

Check trans light is flashing.its full of fluid hot. trans worked a little at first then started slipping. now it wont hardly pull out of its tracks forward or reverse&can smell fluid but cant tell where its coming from its a 1993 isuzu rodeo. when i got it you had to manuel shift it to get it to higher geers but i put a voltage regulater on it and its worked fine for two years.but now this can you help me?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 274 Answers

Hi there brandon. It sounds like the solenoids have burnt out. Have Autozone or any other car parts store read the DTC's (diagnostic trouble codes). That will tell you exactly what the problem is. The tranny needs work or replacement.

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 crown victoria possible trans slip


I would say your 90% assured the trans was neglected & has failed

That is what happens to ALL transmissions, that are driven hard,never change the fluid every 3 years & continue to drive when the trans acts up

You did the correct thing,you just bought the problem

Apr 11, 2014 | 2003 Ford Crown Victoria

1 Answer

My 1994 chevy pu 4x4 4L60E trans pretty much just stopped working. its always shifted fine and the other night it blew fluid out the dipstick and out of the overflow tube on the top of the trans and n


have a pressure test done on the transmission to determine if there is mechanical failure in side. Remove the pan and do a check of the band and clutch packs as something may have broken . The sudden changing of direction under rpm's will cause damage to the mechanicals in the box.

Feb 14, 2014 | 1986 Chevrolet K1500

2 Answers

1994 nissan altima sometimes sluggish at take off, high rpms when changing gears


This sounds like a slipping transmission , check the fluid level first and make sure its full, if its full then you have ****** problems and may need to have ****** rebuild done,

Another thing is to make sure the trans passing gear cable is connected at the throttle where the gas cable is.

Sep 03, 2012 | 1994 Nissan Altima

1 Answer

1998 honda passport auto transmission slips


CHECK THE TRANSMISSION FLUID TO SEE IF IT IS LOW. THERE SHOULD BE A COLD LEVEL AND A HOT LEVEL. WITH THE TRANS IN PARK AND HOT, ENGINE RUNNING PULL THE DIPSTICK TO SEE IF THE TRANS NEEDS FLUID. WHEN ADDING, MAKE SURE THE PROPER FLUID IS USED. IF THE TRANS FLUID LEVEL IS OK BUT THE TRANS FLUID SMELLS BURNED OR IS VERY DARK THEN HAVE THE TRANSMISSION SERVICED WITH FLUID AND FILTER. I HOPE THIS HELPS. THANKS FOR USING FIX-YA AND FOR ANY COMMENTS. BEST OF LUCK

Sep 06, 2009 | 1998 Honda Passport

1 Answer

Tow/haul light comes on gauge shows HOT


Does the trans fluid have a burnt smell and is it brown or dark brown as opposed to a red wine color? If this is the case then you may have a service issue caused by a clogged trans filter which is what this sounds a great deal like and the sooner you get the truck to the dealer or your mechanic the better as the trans in these are not cheap to rebuild or replace.

Aug 21, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Slipping bad in every gear and wont move. it started by just a little slip then it completely went. trans fluid is still red and doesnt smell burnt.


Causes could be:
  • Low on trans fluid
  • faulty torque converter
  • low trans pump pressure
  • Blown valve dody gasket
  • restricted trans oil filter
Chk trans fluid with engine running in neutral! Bring to proper same same.

Jul 08, 2009 | 2003 Honda Civic

1 Answer

Auto transmition wont go into 3rd and 4th gear


I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist   

Apr 23, 2009 | 1996 Mazda MX-6

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...