Question about 1999 Ford Explorer

1 Answer

I have a 1996 ford explorer and my computer would not reset i put a scanner on it and it said that my iat sensor needed to be replaced would that cause my computer to not reset?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 96 ford explorer with a replaced engine and every other time i crank it up the engine wont turn over and i have to disconnet the battery for 30min and connect them back and it cranks up. what is the problem?

Posted on Jun 14, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the AIT sensor on a 2003 Ford E250. V8 4.6l

26247308-3x24vpx20nhydej15kwplfm4-5-0.png Usually; the MAF sensor has the IAT (intake air temperature sensor) integrated in one unit. So you should work on the MAF unit. Use a scanner, pull the codes and know what you're really up against.

Jul 28, 2016 | 2003 Ford Explorer

1 Answer

2004 Explorer Replaced Alternator, but car idle still not right, stalls, ck engine light still on. Car lights when dim and then car died. Mechanic said it was the alternator. Alternator replaced. Car...

You need to put a scanner on the truck and see if any codes are set and if so of course repair them and then clear the codes in the computer with the scanner. I would check the idle air control and the throttle position sensor. I would also check the alternator by starting the truck and then taking off the positive battery cable and the truck should continue to run. If not the alternator that was put on is bad.

Jun 18, 2017 | 2004 Ford Explorer

1 Answer

Hello people i got a gmc 99 jimmy 2door sls the engine light keeps coming on then going out ive coded it to be an iat sensor and also says the iat sensor intermitten voltage high and then the knock sensor...

the IAT may be bad or the connector is bad, real common (friend should know to check that) get a real scanner and see what the IAT is reading, then move the connector and see if it changes. if it reads -40f then its bad or disconnected.

Sep 08, 2011 | 1999 GMC Jimmy

1 Answer

I put my ford explorer on a it reads po113its a 99 can you tell me what the code stands for

p0113 is IAT curcuit # 1, change iat sensor. it is in air hose from air filter to throttle body. check the wiring for sensor also. I just changed mine on a 2000 malibu and it cost less then $20.00. have a good day !!

Apr 19, 2011 | Ford Explorer Sport Cars & Trucks

1 Answer

Where is the IAT sensor on a 1999 Ford Explorer SOHC V6?

The IAT sensor and your Mass Air Flow sensor will be one in the same located near your filter box on the intake tube

Mar 07, 2011 | 1999 Ford Explorer

1 Answer

Yes, I'm trying to find the ait sensor on my 1996 ford explorer. Can you tell me where it is located, or the position where it is at?

You mean IAT, right? Intake Air Temp? depends on which motor you have. I have a couple diagrams below:

4.0 SOHC: on back side of intake hose


5 liter: on top of the hose


Oct 26, 2010 | 1998 Ford Explorer

1 Answer

How do i know which o2 sensor needs to be replace?

how do you know you need one? u need a good scanner that shows live data.

May 27, 2010 | 1996 Ford Explorer

1 Answer

The CEL is on and codes that came up on scan are P171 & P174, replaced O2 sensors and it has not changed what next?

There is an Intake Air Temperature (IAT) sensor mounted in or near the air filter housing. This is a simple thermistor sensor that helps the PCM determine the air temperature of the air entering the air filter and ultimately the engine intake. Sounds like you might have a faulty IAT sensor or a wiring issue for the IAT sensor.

Feb 28, 2010 | 1997 Ford Explorer AWD

2 Answers

I cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC

Try “” or your local library for diagrams and step by step instructions.

Mar 12, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides