Question about Dodge Durango

1 Answer

How do i reset esp sensor on a 2006 Durango ?

Posted by on

  • jayp46 Apr 06, 2011

    I tried to Disconnect for about a hour and still the lights are on. I just replaced the Multifunctional Switch is it possible that I could have put something back together wrong? I question the Clock spring if I put it in the proper position. Is this a possibility?

    Cheers
    Jay

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 274 Answers

If there is no problem with it you can disconnect the battery for 15-20 minutes. That will reset the computer and sensors. If after you do that and i comes back on you need to replace the sensor.

Posted on Apr 05, 2011

  • Kelly Comstock
    Kelly Comstock Apr 06, 2011

    Yes if the spring is put in wrong it will throw the sensor off. The spring helps to determine the durango's angle. If the spring or any other components are installed wrong it will think the car is about to roll over.

  • Kelly Comstock
    Kelly Comstock Apr 07, 2011

    Any luck on this? Did you mark as unhelpful lol? If you did that is ok i just wanted to know if you need anymore help.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 dodge Durango


Could be speed sensor.

Jun 12, 2013 | 2006 Dodge Durango SLT

1 Answer

My esp light has come on and it won't turn off on a Audi a3 2006


TDISLine 1874 solutions Jun 16, 2012
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.

Jan 09, 2013 | Cars & Trucks

1 Answer

The ESP light on my AudiA3 stays on


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.


tdisline_516.jpg

Jun 16, 2012 | 2006 Audi A3

1 Answer

What does ESP light mean on a cls 500 Mercedes Benz


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.


tdisline_516.jpg

Feb 10, 2012 | 2006 Mercedes-Benz Mercedes Benz CLS500

1 Answer

I the other day I had my 02 sensors replaced in my 2006 Dodge Durango. Replacing the sensors did not work, it only made things worst. Before I had the sensors replaced the trucked ran and idled properly,...


This sounds like a case of the oxygen sensors NOT being the cause, but rather the victim. Something else, like a vacuum leak, or other engine problem, is occurring. Keep investigating.

Jul 06, 2011 | 2006 Dodge Durango

1 Answer

How do I reset my tire pressure light on my 2004 Dodge Durango , so it will go off


With the factory air pressure monitoring system of the dodge vehicles the light should automatically reset when the tire is reinflated to the proper pressure. If the light remains on after adjusting the air pressure then the problem lies at one of the individual sensors located at the valve stems on the rims

Mar 08, 2010 | 2006 Dodge Durango

1 Answer

Reset the Tire Pressure Warning light.


well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. If you have replaced the sensor, it must be programmed into the WCM by the dealership.

Nov 21, 2009 | Dodge Durango Cars & Trucks

3 Answers

2006 dodge sprinter esp light on and tire spin light


Go to nearest garage and do diagnosis test and fault erase.

Mar 04, 2009 | 2006 Dodge Sprinter

2 Answers

Check engine light on dodge durango


Hi,
I Found a solution for this problem.
the code is P0344.
Camshaft Position Sensor `A` Circuit Intermittent (Bank 1 or Single Sensor)
I Got this sensor at Autozone for $ 25,99.
Hope this help.
My car-2006 Dodge durango V8 4.7 sxt

Jul 02, 2008 | 2006 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...