Question about 2008 Chrysler Sebring Convertible

1 Answer

Trying to change spark plugs. 3 are visible. other are under a covering and don't know how to get the cover off. Also, on the convertible, something was bent and top will not go all the way down.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 638 Answers

Some of the covers have 1-2 bolts holding them down, normally 1 on each side, then there are some of the plastic covers that just pop straight up, and off, check yours for these suggestions. on the convertible top problem, raise up top slowly, and then check the areas of where it goe's back down to make sure nothing is restricting it from going all the way down. also check the metal arms that hold the top in position.

Posted on Apr 05, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Spark plug location on jaguar s type v6 please

Just done mine today, pain in the a--e, remove plastic cover on right hand side of engine (standing in front) 3 plugs clearly visible under the coils,8mm socket needed to remove bolt holding coil onto plug. Next 3 are hidden under the inlet manifold which will have to be removed to get at them...GOOD LUCK.

Aug 31, 2013 | Jaguar Cars & Trucks

1 Answer

Change spark plugs

tools: 10mm and spark plug socket wrench, rochet extensions, rochet and a torque wrench, T30 torque set and a (BMW)screwdriver.
- remove cabin filter(3 cover knobs) and cabin filter housing(4-T30 bolts or screws).
- remove four bolts and cover of the engine. not to forgot to cover oil fill after taking out engine covers.
- take out the wire by slipping up the lock.
- remove 2-10mm bolts of the ignition coil and take out one by one not to evrything.
then you have your spark plug.

Mar 02, 2012 | 1995 BMW 5 Series

1 Answer

How do I change spark plugs on a 97 Saturn slt

Well should be pretty basic youll need a 3/8 ratchet and an extension and a spark plug socket, if you cant see the plug wires and plugs you may need to take a cover off but they should be visible at the top of the engine, remove the plug wire and unscrew the spark plug, install new plug and replace the wire, do one at a time so you dont get the wires mixed up

Sep 03, 2011 | 1997 Saturn SL

1 Answer

Had to change the valve cover on my 1991 merc. capri and I guess I have the spark plug wires crossed. The fireing order is 1 3 4 2 but I don't know which wire is which.

Number 1 is first next to arrow on dis. picture.
Next the white on dis. cap goes on 3
If you have any problems let me know ??

Jun 20, 2011 | Mercury Capri Cars & Trucks

1 Answer

Where are the spark plugs on 2008 sebring convertable 2.4L


Feb 25, 2011 | 2008 Chrysler Sebring Convertible

1 Answer

How do i change the spark plugs

On the 4 cylinder engines the spark plugs are located on the top of the engine, but not visible.There should be a cover that tells you that it is DOHC 16valve or whatever it may be.The spark plugs are located under this cover.The spark plugs will have a boots instead of a wires. go to, this site will tell how to change plugs on, aleros different size engines. have a good day !!

Feb 12, 2011 | 2001 Oldsmobile Intrigue

2 Answers

Where are the spark plugs located in a 03 hyundai santa fe??

To locate and change the the (4) spark plugs on a 2003 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.

Nov 21, 2009 | 2003 Hyundai Santa Fe

1 Answer

Bmw x3 spark leads n plugs need changing where are they under th bonnet

remove the top covering the intake manifold, thr spark plugs and coils are located in what appears to be the valve covers under the black plate

Oct 17, 2009 | 2004 BMW 3 Series

3 Answers

Where is the cam switch position sensor located on a 2006 chevrolet impala

under the power steering pump should be 3 wires....if it is electronic steering then it is on the left side on top of engine block

Oct 14, 2009 | 2006 Chevrolet Impala

1 Answer

Spark plugs and wires

Remove the large plastic engine cover.

Mar 27, 2009 | 2002 Kia Sportage

Not finding what you are looking for?
2008 Chrysler Sebring Convertible Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides