Question about 1997 Plymouth Voyager

Open Question

How do i change power steering pump on my 1997 plymouth grand vorager van 3.3l v6

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: power steering pump

The pump has to be removed from under the vehicle by removing the exhaust system from the flex bracket and moving it to as far left of the vehicle as possible..remember you have to remove the splash shield that protects the engine components first...then remove all associated bolts,hoses (plug them so they won't drip) and remove the pump from the vehicle..that it.

Posted on Dec 31, 2008

Ad
  • 1779 Answers

SOURCE: power steering pump

This removal is rather involved: use a turkey baster to suction out PS fluid,disconnect neg battery cable, remove serpentine belt, raise vehicle, support on jack stands, disconnect Oxygen sensor wiring harness from vehicle wiring harness, (access to this connection is thru the wiring harness grommet in the floor of the vehicle) remove catalytic converter from the exhaust manifold, remove exhaust system hangers/isolators from the bracket on the exhaust system, move the exhaust system as far as possible to the rear and left side of the vehicle, remove accessory drive splash shield, detach the ps supply hose coming from the fluid reservoir, from the fitting on the ps pump, plug the hose to prevent fluid leaking all over, remove ps pressure line from pump, plug this line also, remove ps return hose, plug line, remove nut attaching pump (@ rear of pump) to mounting bracket, loosen 3 bolts at front ps bracket, remove pump and bracket as an assembly, now remove 3 bolts and separate, reverse to install. Yes, it's a b-itch. good luck, countrycurt0

Posted on Oct 07, 2008

  • 564 Answers

SOURCE: need to change power steering pump on 99 plymouth

its easy to do but if you want a manual chilton has one you can find the manual you speak of at auto zone for under 20 dollars. it will gve you step by step for any part on your car.

Posted on Nov 14, 2009

wracefans24
  • 1985 Answers

SOURCE: how to replace power steering pump in 2000 Plymouth Grand Voyager

you really don't want to do this job!
it's a hard one even with a hoist and the right tools

Posted on Dec 06, 2009

  • 3 Answers

SOURCE: how do i replace the water pump in a 1997 plymouth

I did replaced new water pump because it keep increase hot up. how it solve?

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering diagnosis


Slipping belt or failing pump most likely. You might try draing the system and refilling including a Lucas type power steering fix additive.

Apr 23, 2015 | 1999 Plymouth Grand Voyager

1 Answer

Why will van not steer right or left?


Could be bad power steering pump, no power steering fluid
Broken belt/s or other more serious problems.

Mar 04, 2015 | 1996 Plymouth Grand Voyager

1 Answer

Remove power steering pump


I'm afraid this could require replacing the rack and pinion completely.

May 23, 2013 | 1997 Plymouth Voyager

1 Answer

When replacing water pump on V6 3.O Do we need to change timing belt also?1997 Plymouth Grand Voyager


No. But if your that far into the engine it is very little more that you need to remove to replace it. If it has never been replaced and you have more than 50,000 miles I would recommend replacing it.

Sep 22, 2010 | 1997 Plymouth Voyager

2 Answers

1997 plymouth grand voyager v6 3.0L broken timing belt


I had the same thing happen, No, I was told this is not one of the engines that allows the piston to contact the valves. I replaced the timing belt 2 years ago and had no valve problems.

Sep 22, 2009 | 1997 Plymouth Grand Voyager

1 Answer

1997 Plymouth Grand Voyager, Will not start and run


What you have the cap and rotor.could be bad use good one.

Sep 04, 2017 | 1997 Plymouth Grand Voyager

1 Answer

Power steering pump still not working


where is the oil draing or leaking to or from?

Jun 09, 2009 | 1994 Plymouth Voyager

Not finding what you are looking for?
1997 Plymouth Voyager Logo

Related Topics:

699 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...