Question about 1996 Pontiac Sunfire

2 Answers

My lights wont come on ive changed fuses and bulbs what can problem be please n thanx

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 3,640 Answers

Turn key on, check to see if power to front headlights. if not check out the headlight switch.

The left hand control arm that controls the lights is known to wear out and I would take it to a dealer for check-out and/or replacement. have a good day !!
Comments

    Add a comment...


    Posted on Apr 05, 2011

    • carl Apr 05, 2011

      also check headlight control relay it may be bad.

    ×

    Ad
    • Level 3:

      An expert who has achieved level 3 by getting 1000 points

      Superstar:

      An expert that got 20 achievements.

      All-Star:

      An expert that got 10 achievements.

      MVP:

      An expert that got 5 achievements.

    • Pontiac Master
    • 4,977 Answers

    You may have a bad switch for the lights.if the fuses and the bulbs are good,you don`t say if your talking about the headlights tail lights,dash lights,signal lights brake lights,low beam lights high beam lights or both.i`m assuming headlights.if you have a daytime headlights,the relay in this car it could have gone bad as it is tied into the regular headlight system.

    Posted on Apr 05, 2011

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Hazard lights, break lights, turn signal lights wont work. Ive changed all the bulbs and they still wont work.


    have you checked to see if you have any power to lights. it might be a blown fuse! if you do not have a book on where the fuses are call auto-zone and they will tell you. or pull one fuse at a time to check. check to see if any power to bulbs. good-day ! if you have problem it might be a ground wire to lights.

    Aug 25, 2011 | 1990 Chrysler Imperial

    1 Answer

    My 98 ford exsplorer brake lights don't light up, the one on the roof does but the other two don't, I've checked and the bulbs are fine so is the fuse.


    Dear,
    Please check for either there is a wirring problem.
    or might be the bulbs are fuse.
    or the fuse for those bulbs are blown off...

    kindly check all the aspects and let me know if it does not get solved

    thanx

    May 07, 2011 | 1998 Ford Explorer

    2 Answers

    Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


    I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

    Jun 18, 2009 | 1985 Ford F150

    2 Answers

    How do you change ford focus estate 2000 x reg dashboard lights


    HI THERE I TAKE IT THE BULBS HAVE GONE BEHIND YOUR DASH FIRSTLY MAKE SURE THE REST OF THE DASH LIGHTS ARE OK LIKE HEATER/SWITCHES ETC IF THEY ARE OK THEN WE CAN RULE OUT FUSES CAUSE THEY ARE NORMALLY ON SAME FUSE.
    TO STRIP DASH YOU WILL NEED TO REMOVE TORX OR PHILLIPS SCREWS AT COVER OF SPEEDOMETER YOU CAN NOW REMOVE COVER NOW YOU WILL SEE PHILLIPS OR TORX SCREWS HOLDING IN SPEEDOMETER REMOVE SCREWS AND MOVE SPEEDOMETER ONCE YOU HAVE DONE THIS DISCONNECT PLUG AT BACK OF SPEEDO YOU SHOULD BE ABLE TO GET TO BULBS ONCE YOU HAVE DONE THIS REPLACE BLOWN BULBS AND REBUILD BACK UP IF THIS HELPS YOU PLEASE RATE IT THANX.

    Jan 04, 2009 | 2000 Ford Focus

    Not finding what you are looking for?
    1996 Pontiac Sunfire Logo

    450 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts

    yadayada
    yadayada

    Level 3 Expert

    76051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8265 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...