Question about Dodge Intrepid

1 Answer

2004 dodge intrepid constantly stalls while driving. Car starts up after a few minutes. Only codes showing up are P0129, P0442, P0442P. What can be causing this, what is the fix?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 64 Answers

P0129 Barometric Pressure Too Low

The shop manual gets into great detail about 5-VOLT SUPPLY CIRCUIT SHORTED TO BATTERY VOLTAGE.

Basically it is receiving the information from the Manifold Absolute Pressure sensor (MAP sensor)

Changing the MAP SENSOR may correct this issue. The problem is that the sensor may not be the issue and it may be the circuits that feed info to the sensor. The pressure is translated to and measured in voltage and the electronics that create the voltages could be at fault. The MAP sensor is on average $100.00 and cannot be returned once installed so if you replace it and the problem is not fixed you will not be able to get that money back.

P0442 Evaporator Emission Control System Leak Detected (small leak)

This is caused by a decrease in expected fuel tank pressure. It could be a loose or leaking gas cap. I leak in the evaporator hose or canister or in some cases a gas tank replacement.

I hope this helped.

Posted on Apr 05, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

P0129 and p0108




May 12, 2014 | 2003 Dodge Intrepid

1 Answer

P0129 and p0441 x2

code p0129 refers to barometric pressure-two low===causes wiring---BARO sensor, ---mechanical fault
code p0441 refers to evaporative emission (EVAP) system--incorrect flow detected=== causes ---hose connection/s---intake leak--EVAP canister purge valve

replace the BARO sensor and the purge valve after seeing that the filler cap is on correctly.

Dec 12, 2013 | Cars & Trucks

1 Answer

Dodge intrepid 2004 showing code p1687, check engine came on and air bag light, speed ometer and tack gauge dropped to zero but started working 5 seconds later light is still on and showing this code. Can...

the lamps all change at engine stall , did it stall.
at about 300 rpm all engines (gas) stall, and the ECU changes state.
all cars.
does car run, ok, drive ok ,start ok, and sound ok? just a clue here.

Sep 25, 2013 | 2004 Jeep Wrangler

1 Answer

Our code is showing P0129 on 2004 Dodge Intrepid 2.7 litre. No one around here has a MAP sensor. Is there anyway to fix this one?

The way to fix it is to replace the MAP sensor. Order it if you have to. I recommend , its a dealer that ships OEM parts at great prices.

Jul 24, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

Engine code of p0442 on a 2004 intrepid what does it mean

p0442 is evaporative emissions medium leak detected. try cleaning your charcoal canister or may be your purge valve needs to be replaced those are the most common causes

Sep 27, 2009 | 1999 Dodge Intrepid

1 Answer

Dodge Intrepid codes

could be a vac leak. what are the definitions for the codes??

Sep 21, 2009 | 2004 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 will crank at times but not start

had my grandmas car doing a similiar concern ended up being cranck sensor was 40 bucks took about 15 minutes not hard at all

May 28, 2009 | 2000 Dodge Intrepid

1 Answer

Car starts, drive a mile, stalls.

try haviing your alternator checked advance auto parts can check it while its on the car and the can check the battery too. if thats not it it may stall due to a loose battery connection or a loose ground strap. if it stalls and everything turns of (electrical) it may be a connection or ground strap.

Aug 14, 2008 | 2002 Dodge Intrepid

1 Answer

2004 Dodge Intrepid cuting off

try to replace your crank sensor but before that top on computer with car runing and see if stalls if it does your computer is not good most of times the computer is located by the drivers front fender at front side in engine compartment

Jun 01, 2008 | 2004 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides