Question about Dodge Intrepid

1 Answer

Engine was quiting fairley often with a previous code, think it was po340 . replaced the cam shaft sensor as requested. now it anly happens less frequentley but gives anew code po406

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

Check you egr sensor first

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix OBDII CODE: PO 340


code to 0340 refers to cam shaft (CMP) sensor A , bank 1 ---circuit malfunction===causes -- wiring--- CMP sensor --- ECM
check all wiring and connections to the sensor , replace the sensor

Jul 06, 2017 | Kia Cars & Trucks

2 Answers

Code p0340, p0462 on subaru outback 2001


Po340 is a cam shaft sensor and po462 is low voltage on your fuel guage. So i assume you are haveing fuel level issues. If you can turn wrenches you can do these repairs yourself. Just do a google search and you can get some youtube videos of sensor replacement and location. Have fun.

Aug 29, 2014 | 2001 Subaru Outback

2 Answers

Camshaft position sensor a circuit bank 1 or single sensor 03 trailblazer p0340


for the code po340 go to this site it will help you out. obd-codes.com/po340

Apr 25, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

I own a 2004 accent with 122,000 km on it. Long story short, had to get a new head gasket put on, so rocker cover, cams, everything had to come off. Work was done and everything was put back together. I...


P0340 - Cam Timing

SYMPTOMS/CONDITIONS
of a mistimed camshaft system (all must apply):
  1. Camshafts have previously been removed from the engine.
  2. Engine runs rough.
  3. Vehicle sets P0340 (camshaft sensor code).
  4. Camshaft sensor has been checked with a known, properly operating camshaft sensor.

CORRECT:
The diagram in the manuals should show the timing marks on both cam gears to be on the blue timing chain links.

ghost45_11.jpg

Mar 23, 2011 | Hyundai Motor 2004 Accent

1 Answer

I need to know where the Cam Shaft sensor is for my 2005 PT Cruiser is. My car is sputtering and the car is not starting when the switch is turn on.


the cam sensor is near the battery. it is on the end of the cylinder head rear. you should have a code po340 if the cam sensor is bad. get someone to scan it before replacing the sensor . check under the car for a wire rubbing on the cv shaft that goes to the crank sensor.

Aug 31, 2010 | 2005 Chrysler PT Cruiser

2 Answers

A 2004 Dodge stratus with the 4 cylinder that will not start


code p 16 refers to crankshaft position/cam shaft position bank 1 sensor A--correlation====causes ---wiring---CKP sensor ( crankshaft position sensor )---mechanical fault

code p 0340 refers to -camshaft (CMP) sensor A bank 1 circuit malfunction ===causes wiring--CMP sensor--ECM
cosrs nothing to check the timing belt , just remove the oil filler cap and see if the rockers are moving when turning it over
the clue here may be bewteen the 2 codes , the word correlation and circuit malfunction so check the wiring, harness connections for pin corrosion and then substitute the ECM with a know good unit as the correlarion and circuit malfunction could be in the ECM
if the ECM program is not getting good reports for both sensors then it reasons that the piston and cam shaft are not timed properly and so will not allow it to start

May 15, 2017 | 2004 Dodge Stratus

1 Answer

Po340 code replaced cam shaft sensor and synchro


then replace cam sensor it dosent seem like thats it but i have seen tricker things befor

Aug 11, 2009 | 1999 Ford Taurus

2 Answers

DTC - PO340, PO325


My Nissan micro 2004 model just stopped in the middle of the road one day then the engine management light came on, anyway took it to my local garage TWK Thomas who said it was a cam shaft sensor problem. OK so sensor was put on, engine management light went off for two days only. So went back to the garage they said that another sensor should be fitted on the opposite side. And then the problem should be rectified, but i had given the £160 for this problem to be fixed the first time. I decided it was time to take it to another garage Nis Tec they put it on the computer and a code po340 came up would this mean another sensor or the cam chain has stretched please help. ...claire

Jul 09, 2009 | 1998 Nissan Maxima

1 Answer

Po340 and po344 intrepid


Take a look at this link http://www.obd-codes.com/p0340.  The problem lies in the cam shaft sensor circuit which means that it isn't necessarily the sensor itself.  Read what that page has to say and just start from the top and work your way down the solutions.  As far as how much it cost, it obviously depends on what is wrong, but assuming it is your cam shaft sensor you can buy the part for around forty dollars at AutoZone.  Let me know if you have any other questions.  Thanks for rating my response and for using FixYa!

May 29, 2009 | 2004 Dodge Intrepid

1 Answer

Error code po340 for a 2002 hyundai elantra


Here is what I could find on your P0340 error code:
CausesA code P0340 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
Possible SolutionsWith a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required
Sounds like since you have replaced both the camshaft and crank shaft sensors you need to look at the PCM.  Go down the line of possible solutions and don't replace the PCM unless nothing else works obviously.  I hope this helps but it looks like you are looking at getting a new PCM.  Good luck.  Thanks for rating my response and for using FixYa!

May 27, 2009 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...