Question about Jeep Amc

Open Question

Suzuki escudo transmission rebuild kit also the manual for it

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1996 suzuki escudo 2door automatic 4wd

"N" is for Normal
"A/T" Is for Automatic Transmission
"P" is for Power

When "P" is selected a light that says "POWER"
comes on, it is just under the speedometer.

This switch is for the automatic transmission, it changes the shift points in the transmission for loaded or towing conditions when you need more power.

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: transmission rebuild manuals

Here is a free download for a 1993 Jeep 42RE http://www.scribd.com/doc/4791235/93ZJ-Secc-21S-Automatic-Transmission-42RE

Posted on Mar 28, 2009

  • 14036 Answers

SOURCE: How hard is it to rebuild an 86 Suzuki Samurai 5

ITS NOT A HARD JOB. BUT YOU HAVE TO BE CAREFUL.YOU ARE WORKING UNDER A CAR. BESURE TO USE JACK STANDS .YOU NEED A REPAIR MANUAL.IT SHOW YOU HOW TO REMOVE TRANSMISSION.YOU HAVE TO SUPPORT ENGINE WHEN MOVING TRANNY.REBUILT KITS.WILL HAVE ALL GASKETS SEALS AND BEARINGS.BUT MAJOR PARTS YOU HAVE TO BUY THEM SEPERATE.LIKE SHIFT FORK COUNTERSHAFT AND SYNCHRONIZERS.NOW THE CLUTCH KIT IT WILL HAVE CLUTCH PRESSURE PLATE AND CLUTCH RELEASE BEARING.BESURE WHEN YOU BUY KIT MAKE SURE CHECK IT.MAKE SURE IT HAS EVERYTHING YOU NEED.

Posted on Jul 22, 2009

  • 2 Answers

SOURCE: I HAVE A 99 Suzuki Escudo 2.0d RF-Motor. How much OIL?

A typical Mazda RF Diesel Engine requires approximately 5.5litres of engine oil if the engine oil filter is replaced as well.

Posted on Jul 03, 2010

  • 1 Answer

SOURCE: SUZUKI ESCUDO N 4H 4H LOCK 4 L LOCK

my vitara is stuck in 4H how do i get unstuck back to 2H

Posted on Aug 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'd like to rebuild transmission with a few new parts plus need blueprint on how to assemble it and will also need gasket etc. Can you help?


look online or some auto stores not all carry transmission rebuilt kits the kits run about 450 and up check with the kits if they come with a rebuild manual (most rebuild manuals about $45 -70) if it does not come with kit also will need some special tools which can be bought or some auto places rent ---biggest hurdle to start with will be the removal of the transmission

May 21, 2016 | Cars & Trucks

1 Answer

My a/t drops out off gear when turning a corner on my 1998 suzuki escudo..when the steering is straiten up again it goes back into gear.. the a/t is not electronically controlled.


Have you changed the transmission fluid? If you never have then you should do that for sure. May be all it needs but I am betting a shift solenoid is going out on your car which is in the transmission.

Feb 04, 2014 | Suzuki Grand Vitara Cars & Trucks

1 Answer

I have a 95 escudo when it change in to drive at low speed you can hear the transmission slipping


My suzuki escudo jeep is racing when selecting gear and its low on power when climbing hill

Feb 06, 2013 | 1996 Suzuki Escudo

1 Answer

Suzuki escudo g16a automatic transmission not changing gear


Have you had the transmission control module (called the TCM) checked for fault codes? Do this first and then have a trained ****** tech diagnose the resulting codes received if any,. if not codes then you may have a failed transmission or a defective TCM

Jun 24, 2012 | 1996 Suzuki Escudo

2 Answers

How hard is it to rebuild an 86 Suzuki Samurai 5 speed transmission? I have a tranny tech telling me I need a clutch, flywheel resurface and a remanned unit. How hard could it be. Not 1800$$$! That's Hard....


ITS NOT A HARD JOB. BUT YOU HAVE TO BE CAREFUL.YOU ARE WORKING UNDER A CAR. BESURE TO USE JACK STANDS .YOU NEED A REPAIR MANUAL.IT SHOW YOU HOW TO REMOVE TRANSMISSION.YOU HAVE TO SUPPORT ENGINE WHEN MOVING TRANNY.REBUILT KITS.WILL HAVE ALL GASKETS SEALS AND BEARINGS.BUT MAJOR PARTS YOU HAVE TO BUY THEM SEPERATE.LIKE SHIFT FORK COUNTERSHAFT AND SYNCHRONIZERS.NOW THE CLUTCH KIT IT WILL HAVE CLUTCH PRESSURE PLATE AND CLUTCH RELEASE BEARING.BESURE WHEN YOU BUY KIT MAKE SURE CHECK IT.MAKE SURE IT HAS EVERYTHING YOU NEED.

Jul 22, 2009 | 1987 Suzuki Samurai

1 Answer

1996 suzuki escudo 2door automatic 4wd


"N" is for Normal
"A/T" Is for Automatic Transmission
"P" is for Power

When "P" is selected a light that says "POWER"
comes on, it is just under the speedometer.

This switch is for the automatic transmission, it changes the shift points in the transmission for loaded or towing conditions when you need more power.

Feb 25, 2009 | 1996 Suzuki Sidekick

1 Answer

Warning beeper in suzuki escudo 1993


remove fuse by fuse but the fuse you move put it back in same place until the beeper quits and leave the one stops the beeper out

Jun 01, 2008 | 2000 Suzuki Forenza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...