Question about 2009 Audi A3

Open Question

How can i reset the service light on an 2009 audi a3 manually?? ive tried holdin dwn right button and turning igition on and then pressing the left button and ive tried pullin button a and let it go with igition on and then repaeting but it doesnt reset

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: audi a3 1.8t dump valve fitting

A dump valve replaces the recirc valve. Did you see the reply to your prior post on this topic that I put up the other day? You can do it but it'll cost you your catalytic converter and O2 sensors - that has been proven out many times in the past. If you don't care about that and don't mind spending $1200-1500 every year or 18 months to replace those parts, then go to www.audiworld.com or www.audidiy.com and look in the tech areas - there are step by step procedures there that walk you through recirc valve replacment. They'll show you how to fit an aftermarket recirc valve, but you can follow that procedure to do a BOV as well.

Seriously though, as I said before, some cars are fine with BOVs but Audis are not. You're going to cost yourself a LOT of money just for the sneeze sound and slightly slower turbo spool. Your car and money though so it's your decision.

Posted on Oct 19, 2008

  • 1 Answer

SOURCE: starts when cold but doesnt start when hot

put in a new cool start sensor

Posted on Feb 23, 2009

  • 4793 Answers

SOURCE: how to adust audi a3 door, it has dropped about

if hinges are in good order, then ,with the door ajar "adjust" by grabbing hold of the bottom of the door edge and lifting upwards a little at a time to get correct fit,a common problem with heavy doors nowadays....

Posted on Mar 18, 2010

  • 2006 Answers

SOURCE: how do I reset service

If you have a A3, 2009+ A4, 2005+ A6 or 2004+ A8, or a Q7 and are using the after market software:
Go to guided functions, go to service work, go to reset service light, or something of that nature, and follow the on screen prompts.


Read more: How to Reset an Audi Service Light ' eHow.com http://www.ehow.com/how_5102925_reset-audi-service-light.html#ixzz1O2fZgRqR

Posted on Jun 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How audi a4 2009 service reset?


Just google

audi service reset

There is a very simple explanation there with the "wrench" button and the "0.0" button.

Simple is turn the key off; press and hold the wrench button and tuen the ignition on. Let eh wrench button go, and press the 0.0 button the you will hear the rest. Turn the ignition off, and turn it back on and service reset is complete. Should have no lights after ward.

May 29, 2014 | Audi Cars & Trucks

1 Answer

How to reset mmi on audi a3 2009


Audi A3 2009 is equipped with RNS-E system. Here's the reset procedure:

Mar 02, 2013 | 2009 Audi A3

1 Answer

How do I remove the service notice from the dash board? It's for an Audi A3 2006 model.


Service reset:

Note: This reset method applies only to vehicles with a fixed maintenance schedule. All other vehicles: reset using special VAG equipment, or similar.

tdisline_836.jpg
1. Turn the ignition ON.
2. Pull out button [2].
3. "SERVICE IN ???? KM" or "SERVICE !" appears on the display.
4. Pull button [2] until the indicator shows: "----".
5. Press the reset button [1] within 5 seconds.

The system is reset.

Aug 18, 2011 | 2006 Audi A3

1 Answer

How do I reset service computer warning Audi A3 2009


If you have a A3, 2009+ A4, 2005+ A6 or 2004+ A8, or a Q7 and are using the after market software:
Go to guided functions, go to service work, go to reset service light, or something of that nature, and follow the on screen prompts.


Read more: How to Reset an Audi Service Light ' eHow.com http://www.ehow.com/how_5102925_reset-audi-service-light.html#ixzz1O2fZgRqR

Jun 01, 2011 | 2009 Audi A3

1 Answer

Service lights


Hi, if your 2006 Audi A6 service light is coming up, you have to reset it by following the instruction below..


If your instrument cluster has 2 knobs, one on each side (Older A4's, 1998-2004 A6's, TT's up to ~2006):
Press the right knob and hold it, turn the ignition on, release the right knob and press the left knob, the display should change to service in ----- miles. Or....


Press the right knob and hold it. Turn the ignition on and release the right knob and pull the left one. Then, push the right knob again and pull the left knob again. The display where the mileage is shown should change.


If your instrument cluster has a little wrench on a button on the right (2002-2008 A4's):
Press and hold the wrench button. Turn the ignition on, release the wrench button and press the 0,0 button next to it. The center display should change.


If you have a older body A8, you may be able to reset without a scan tool. Press the 0,00 button on the right of the cluster, turn the ignition on and release the 0,00 button and press the "M" or "Mode" button on the left and it should reset. If this does not work, or you have a 2004 or newer A8, it will probably require a scan tool.


If you have a much older or newer Audi, or certain A8's, you need a scan tool or a special made service light reset tool, available online. You can also purchase af, ter market software and a adapter lead for your laptop and use that. The reset tools will come with instructions. The After market software will go as follows:
On most older vehicles, enter vehicle self diagnosis. Go to #17: Instrument cluster. Go to adaptations, and change the following adaptation channel numbers to the number listed next to it, following the on screen prompts to save and accept.
Channel 5 --> 12
Channel 6 --> 24
Channel 7 --> 36
Channel 8 --> 72


If you have a A3, 2009+ A4, 2005+ A6 or 2004+ A8, or a Q7 and are using the after market software:
Go to guided functions, go to service work, go to reset service light, or something of that nature, and follow the on screen prompts.

Jan 10, 2011 | 2006 Audi A6

1 Answer

How do I reset my service indicator on my car its a 2006 A6 audi this was not done when the car was in and Audi are now looking to charge me for this service


Hi, if your 2006 Audi A6 service light is coming up, you have to reset it by following the instruction below..


If your instrument cluster has 2 knobs, one on each side (Older A4's, 1998-2004 A6's, TT's up to ~2006):
Press the right knob and hold it, turn the ignition on, release the right knob and press the left knob, the display should change to service in ----- miles. Or....


Press the right knob and hold it. Turn the ignition on and release the right knob and pull the left one. Then, push the right knob again and pull the left knob again. The display where the mileage is shown should change.


If your instrument cluster has a little wrench on a button on the right (2002-2008 A4's):
Press and hold the wrench button. Turn the ignition on, release the wrench button and press the 0,0 button next to it. The center display should change.


If you have a older body A8, you may be able to reset without a scan tool. Press the 0,00 button on the right of the cluster, turn the ignition on and release the 0,00 button and press the "M" or "Mode" button on the left and it should reset. If this does not work, or you have a 2004 or newer A8, it will probably require a scan tool.


If you have a much older or newer Audi, or certain A8's, you need a scan tool or a special made service light reset tool, available online. You can also purchase af, ter market software and a adapter lead for your laptop and use that. The reset tools will come with instructions. The After market software will go as follows:
On most older vehicles, enter vehicle self diagnosis. Go to #17: Instrument cluster. Go to adaptations, and change the following adaptation channel numbers to the number listed next to it, following the on screen prompts to save and accept.
Channel 5 --> 12
Channel 6 --> 24
Channel 7 --> 36
Channel 8 --> 72


If you have a A3, 2009+ A4, 2005+ A6 or 2004+ A8, or a Q7 and are using the after market software:
Go to guided functions, go to service work, go to reset service light, or something of that nature, and follow the on screen prompts.

Hope it helps

Jan 10, 2011 | 2006 Audi A6

1 Answer

How to reset the service light?


Hi, press and hold BOTH right and left panel knobs while turning the ignition key to the ON position, the regular ligts come up and cycle. The message 10000 miles till next service should come up meanng the service is reset till next service cycle.
You can also check out this link.. http://www.ehow.com/how_5102925_reset-audi-service-light.html
Take care

Aug 05, 2010 | 2009 Audi A4

1 Answer

How do I reset the "service due" light on my 2009 Audi A2 2.0


Press and hold BOTH right and left panel knobs while turning the ignition key to the ON position, the regular ligts come up and cycle. The message 10000 miles till next service should come up meanng the service is reset till next service cycle.

Jan 09, 2010 | 2009 Audi A4

2 Answers

Reset oil change light on my 2004 Audi 1.8T


  1. Turn off the ignition
  2. Press and hold the button on the left side of the display while turning the ignition on
  3. Service OIL will be displayed
  4. Pull out the button on the right side of the display until the service prompt is cleared
  5. The display should now read ---
  6. If the above procedure does not work, outlined below is an alternative procedure:
  7. With the ignition off, push the right button
  8. Turn the ignition on and then pull the left button
  9. This should clear the warning message --- I have a 2002 A4 Quattro. To reset that Service message, hold down the service button. That's the one with the picture of a wrench on it. While holding it down, turn on the ignition. Let go of the service button and press the "Mode" button just to the right of the service button. It should clear the display.
* This does not work in older models, like my Audi A4 /1.6, 1995. It needs the cable and the program ( e.g. VAG-COM). Even with this, clearing the code (IN1 or IN2) is quite complicated.

Nov 13, 2009 | 2004 Audi A4

Not finding what you are looking for?
2009 Audi A3 Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14204 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...