Question about 1997 Chrysler Sebring

1 Answer

My radio will turn on and pick up stations and read cds but won't have any sound coming through the speakers

Posted by on

  • 1 more comment 
  • Cranbury25 Sep 01, 2008

    The radio on my 1992 New Yorker turns on, changes channels, but there is no sound? any suggestions? Has anyone installed an aftermarket type?

  • Anonymous Nov 08, 2008

    Radio turns on and CD turns on and plays but no sound coming out of speakers?

  • mark3807 Nov 14, 2008

    Thats the same problem i have. no sound though the speakers. i have a 2001 sebring and i am stumped. please help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem, I replaced the amp under the passenger seat and it didnt help. What I did was bypassed the amp by cutting the speaker wires on the back of the radio and ran new wires to my speakers. I works great now.

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stuck CD in JBL 4 disc CD Changer / Navigation


before you press the cd on button keep holding the eject button while you press power on, I know this works for computers etc.

Feb 13, 2016 | 2013 Toyota Highlander

1 Answer

Why does My radio work but no sound comes from the speakers?


Blown speakers! Need to attache to bad speaker and see if you hear sound to verify blown speakers.

May 01, 2014 | Chrysler Sebring Cars & Trucks

1 Answer

IS ONLY PICKING UP STATIC RADIO SIGNAL. ALL STATIONS


Yes you have to have an antenna. Does the car not have one originally? If you changed the radio you would have unhooked a large black wire in the back of it. Or maybe it just came unplugged. Anyways without one it won't pick up ****. Good luck

Jul 04, 2012 | Cars & Trucks

1 Answer

Radio work with all the light but no sound, this is on 2003 Honda Accord.


because the light on the radio come on with dash lights doesn't mean the radio is working,check fuse for radio,if its good,check for power at radio connection,if you have power there see if you can see a change in stations when you turn knob,if you do make sure all connectors are plugged in radio,now go to an easy access speaker and plug in a known good speaker

Nov 23, 2009 | 2003 Honda Accord

1 Answer

I can no longer hear the music from my radio or CD on my 2008 G6. I still have a radio signal and the CD player is able to read the CDs, but there's no sound. Is this a speaker issue (perhaps wiring)?


Sounds like a wire problem like you stated and the way to find it is to pull the stereo out and test the wires for voltage should read about 12v. And check the wires on the speakers

Jul 16, 2009 | 2008 Pontiac G6 Sedan

1 Answer

Radio Like Has No Output?


Check the speaker wires, and speakers. You didn't hit the "mute" button, did ya?

May 22, 2009 | 1992 Ford Explorer

1 Answer

The radio will turn on and show the stations but no sounds will come out of them. How do I fix it?


Review the speakers wirin, maybe is broke in the inside door; also can see this documents:

- ZJ-Secc-8F-Audio-Systems
- ZJ-Secc-8W-Wiring-Diagrams (Diagram ZJ-59 / Page 100 and next)

Goo luck, and remember rated this help.

May 22, 2009 | 1994 Jeep Grand Cherokee

2 Answers

No sound coming from my speakers unless my rear defrost is on


There is black box behind back passenger pillar from plastic. This box is responsible for car antenna and rear defogger. There is problematic connection, who cause sparks and plastic and joints on electrical board is melting. open this box and repair melted connections. weld also this two wire to the electrical board.

Apr 29, 2009 | 2003 Oldsmobile Alero

1 Answer

05' Accord Radio volume


the tuner section in the car radio is dying.  It may be time for that XM radio you want.  Buy the easy install kit on ebay. 

Apr 01, 2009 | 2005 Honda Accord

1 Answer

Cracking sound from Radio Speakers


I disconnected the amp and ran jumper wires for the proper speakers (two wires per speaker eight total) . Basically I bypassed the amp now all speakers work and sound fine.

Jul 10, 2008 | 2006 Chevrolet HHR

Not finding what you are looking for?
1997 Chrysler Sebring Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...