Question about 2007 Kia Sportage LX 4x2 A/T

Open Question

How do you get to the blend door actuator on a 2005 Kia sportage?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Blend door

ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min

Posted on Dec 15, 2008

  • 76109 Answers

SOURCE: Blend door not working.

The bleed door controls air temp not where it comes out, dash, floor, defroster, this is most likely a mode control switch problem, that switch is on the ac control head.

Posted on Sep 23, 2008

  • 1 Answer

SOURCE: constant high heat

on climate control press off and heat button and let go quickly. Then press automatic. The display will start rotating eventually displaying a code 025,125 , 024 etc. Then press defrost to stop. You may hear blend door operating atb that time. It worked for my climate control.

Posted on May 06, 2009

  • 155 Answers

SOURCE: new blend door actuator doesnt operate

had this problem before... recheck it for EATC or MANUAL...??? eatc on a manual will only go to half way...sounds like they gave you the wrong part....its a pain to replace wasn't it.....hope this helped you...GL

Posted on Jul 06, 2009

  • 659 Answers

SOURCE: need to locate blend door actuator 98 lincoln

it is located on top of the heater box assy behind the dash just to the left of of the glovebox if you open the glovebox and look to the left you can see it

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

01 kia sportage... no heat output..

You must likely have a broken blend door or blend door actuator motor.

Nov 05, 2016 | 2001 Kia Sportage

1 Answer

Kia sportage 2008 v6,I've a problem with AC,In hot weather after 30 mins drive loose conditioned air and hot air start blowing although after switching engine off for may be 20 mins; AC start working

Bad blend door actuator is your cause. You need to disconnect the actuator from the blend door and manually check the blend door. One side of the door switches the heat and one draws air from the ac evaporator.

Jun 06, 2016 | Kia Cars & Trucks

1 Answer

Heaters blowing cold air from the passengers side and only warm air from the drivers side

Blend door actuator is broken.
The door is not opening and closing the way it should.90% of the time you have to remove the dashboard to replace it.
The other 10% can access it by removing the glove compartment and manually move the door (has to then be tied in place or it'll snap shut)
Some cars have 1 actuator and some cars have 2 of them.

Apr 10, 2016 | 2007 Kia Sportage 4x4 V6

1 Answer

No heat on 02 kia sportage, a/c works great. I dont think the heater vore is bad because there is no antifreeze leaking anywhere. I changed thermostat and the radiator is full, still no heat

Follow the hoses to the heater core/firewall. When up to temp, both lines should hot, about the same temp. To hot to keep your hand on for to long. If one is a lot cooler, it's the heater core. After that I would check the controller or the blend door actuator.

Dec 05, 2015 | 2002 Kia Sportage

1 Answer

We own a 2005 Kia Sedona that has worked well for a long time. However, recently the heating has stopped working and blows cold air.

Yes the fix is to remove the dash from the car and replace the blend door and the blend door actuator.

Nov 06, 2012 | 2005 Kia Sedona

1 Answer

2006 Kia Sportage Door Lock Actuator

Interesting that you and I are both looking to change this out. I'm thinking of doing it myself. This source might be helpful

Oct 10, 2012 | Kia Sportage Cars & Trucks

3 Answers

Driver side blowing hot air passenger side blowing cold air

I'm having the same problem except on mine it's the driver's side that's blowing cold. Do you have the pictures in a finer resolution? I can't make them out and when I zoom, they are too grainy. Does the replacement require removing the dashboard? What's the general cost of the acuators? Are they readily available at like NAPA or other parts stores?

Nov 26, 2011 | 2006 Kia Amanti

2 Answers

My 2005 Kia Sedona heater is blowing cold air even when temperature knob is turned to hot. Friend of family looked at it and said it was the "blend door actory wayer" -- but he was not sure how to...

yes, actuator--black box with motor and gears inside that rotates the blend door. I think yours is right on the front of the heater box, to the right of center under dash. Remove actuator and check door for proper operation. If it opens and closes smoothly by hand, replace the actuator. If the door is sticking, you will probably have to take the heater box out of the car, split it open, and repair whatever is keeping it from opening.

Oct 11, 2010 | 2003 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76070 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides