Question about Ford Explorer

1 Answer

I bought a 2002 explorer and they never gave me a 5 diget code to unlock my doors thank you. leo

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

If this is the factory installed key pad then there are only 2 ways to get the code. The first being that the card with the code on it is still in the vehicle by chance. It will look like a debit/credit card that's all white with the code on it usually kept with the owners manual. The second being you have to take it to a Ford dealership and have them hook it up to a computer and pull the code.

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KEYLESS ENTRY 2004 FORD EXPLORER


Look in the cargo area where the jack is stored

Mar 06, 2014 | 2004 Ford Explorer AWD

1 Answer

2006 mercury mariner factory code for keyless door pad not working


Is it the original factory code? If you bought it used and they gave you the code, someone might have put their own code in.and if the D.D.M was replaced it comes with a new code.you can retrieve it, but it has to be done at dealership. Then you can put in your own code.

Feb 22, 2014 | Mercury Mariner Cars & Trucks

1 Answer

Just bought a 1999 ford explorer xlt don't have


You need a NGS (Ford factory scan tool) They can access the RAP KEYCODE PID.

Mar 07, 2012 | 1999 Ford Explorer

1 Answer

How do you re-program the security code on a 2007


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8

Jun 05, 2010 | 2007 Ford Explorer Eddie Bauer

1 Answer

How can i program my door lock code or find out what it is. on my 2000 limited edition explorer


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed.
FORD KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-I found that some Explorer/Mountaineers enter program mode after 5 times-not 8.

Here is the link for further info.


http://www.2carpros.com/how_to/how_to_reprogram_key_remote_fob.htm


Your factory code is on a card in the owners manual. If that is lost, access the control module in the cargo area behind the left cover panel.

You MIGHT be able to see the code printed on it, or you might need to pull it out in order to see it.

May 27, 2010 | 2002 Ford Explorer

1 Answer

I just bought a 2002 explorer and need the factory door codes so i can program the locks


you need to bring the car to any ford dealer and hook up the diagnostic computer to retrieve the original door code so u can program your desired combination.you cant erase the original factory code but you can add you own only.

Jan 31, 2010 | 2002 Ford Explorer

2 Answers

How can i get the keypad code to unlock my 2005 ford explorer?


The factory keypad code is the bold numbers listed on the side of the keypad module, should be located under the drivers side dash on the left, look for the numbers that are in bold type. Hope this helps, let me know

Dec 14, 2009 | 2005 Ford Explorer Sport Trac

2 Answers

Just bought a 2002 ford explorer need to know how to get the door lock code.


there is one in the owners manual printed on a card, otherwise you will have to write down your vin number and contact the dealer for this. It's the only way.

Oct 14, 2009 | 2002 Ford Explorer

3 Answers

Is there a way to reprogram the keypad for the keyless entry on a 1999 ford explorer?


if i was u i would talk with ppl who do aftermarket security systems they would have a really good answer for that or someone on the internet might sell a reprogramer on like ebay

Aug 10, 2009 | 1999 Ford Explorer

2 Answers

Auto Lock Activation


Deactivating/activating autolock
There are 3 methods to enable/disable this feature. One through your
dealer, the second with a power door unlock/lock sequence and the third
with the keypad.
Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors, liftgate and liftgate window are closed.
Controls and features
Power door unlock/lock
procedure
You must complete steps 1-5 within
30 seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the power door unlock control three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON. The horn will chirp.
6. Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.
7. Turn the ignition to OFF. The horn will chirp once to confirm the
procedure is complete.
Keyless entry key pad procedure
1. Enter 5 digit entry code
2. Press and hold 7/8 control
3. Press and release 3/4 control
4. Release 7/8 control.
The user should receive a horn
chirp
to indicate the system has
been disabled or a chirp followed by
a honk to indicate the system has
been enabled.
Smart unlock
This feature prevents the driver’s door from locking while the key is in
the ignition. This feature will unlock only the driver’s door if the key is in
the ignition cylinder, the driver’s door is ajar and all doors are locked
using the interior trim switch. If these conditions are met, the entire
vehicle will lock and the driver’s door will unlock within 1 second.
Controls and features
127

May 15, 2009 | 2002 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...