Question about 2000 Ford Focus

Open Question

Where is the timing mark on a 2000 focus se 2.0 sohc

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: 2000 ford escort se 2.0L sohc timming belt

the easiest way to help you is you can purchase a repair manual for your vehicle at an auto parts store like napa,Oreillys or auto zone the manuals are around 20 dollars and have all the specifics you will need to do this your self. these manuals have diagrams and step by step instructions. good luck and hope this helps you.

Posted on Aug 28, 2008

  • 1 Answer

SOURCE: 2000 ford focus twin cam timing

please helpme i need timing marks for ford focus 2000 16 valvs

Posted on Oct 13, 2008

  • 12 Answers

SOURCE: what other engines will fit ford focus 2.0 year 2000 sohc.

None really because of the engine harness. and also what the car is equipped with such as features.

Posted on Mar 12, 2009

  • 13 Answers

SOURCE: cannt find tims marks on 2000 ford focus twin cam

there are no marks on the cams line the crank up you should see marks on it and on the cams take a flat piece of steel like a flat file and put it on the end of the cam shafts the side near near the drivers side ounce you take a look youll see what i mean this should help you out

Posted on May 11, 2009

  • 122 Answers

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to time a 2000 hyundai accent 1.5 sohc motor?


tdisline_568.jpgMake sure those 2 marks are alligned durring reinstal

Aug 26, 2014 | 2000 Hyundai Accent

1 Answer

Cv joint replacement


Replace the half shaft its a pain but worth it

May 03, 2013 | 2000 Ford Focus

1 Answer

How do you replace a timing belt on a 2000 ford focus 2.0 liter sohc


Removing The Old Timing Belt Remove the negative battery cable in all models.
  • Detach the passenger inner splash-shield and wheel cover, the accessory drive and timing belts, the tensioner and the crankshaft pulley.
  • Remove the spark plugs, catalytic converter and idler pulley in 2000 and older Ford Focuses. These models also require the crankshaft be turned to "Top Dead Center" (TOC) and a crankshaft timing peg be inserted. Turn the shaft to the right against the timing peg.
  • Undo the retaining fasteners and lift the timing belt cover off the engine. Align the crank and camshaft timing marks. Older models call for undoing the water pump pulley and valve cover before locking the camshaft in place.
  • Release the tensioner's bolt. Turn the arm to the right 14 degrees and place a 1/8 inch drill bit in the opening. This secures the belt tensioner in place.
  • Take the timing belt off.
  • Installing Your New Timing Belt
  • Replace the timing belt counterclockwise motion beginning at the crankshaft.
  • Unlock the tensioner. Recheck the timing marks by turning the crankshaft two rotations to the right.
  • Tauten the tensioner's pulley bolt to 15 to 22 foot pounds (20 to 30 Nm) in 2003 and younger models and to 17 to 20 foot pounds (22 to 28 Nm) in older Focuses. Remove the crankshaft timing peg. Reconnect the crankshaft pulley and secure to 81 to 96 foot pounds (110 to 130 Nm) and 81 to 89 foot pounds (110 to 120 Nm) respectively.
  • Replace the splash shield, front wheel, timing belt cover, accessory drive belt and tensioner and any other items that were disconnected.
  • Hook up the negative battery cable. Start the engine and check that the timing belt is functioning properly.
  • Nov 20, 2010 | 2000 Ford Focus

    1 Answer

    Just replaced my pcm,fuelpump three times, fuel pump driver module and still car will not start? 2000 ford focus 2.0 sohc se. the damn car will not start still!!! the car turns over but will not start or...


    why did you do any of this to begin with. What were the original problems and what did you do to diagnose it .And where did you get the replacement PCM

    Nov 27, 2009 | 2000 Ford Focus

    1 Answer

    Need cylinder head gasket torque specs.


    looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

    Sep 18, 2009 | 2000 Ford Focus

    1 Answer

    2000 focus se heater fan is running all the time


    try to pull the nob off and see if you can turn it off with some pliers the nobs like to strip does it stay one when the car is off?

    Jun 23, 2009 | 2000 Ford Focus

    1 Answer

    What other engines will fit ford focus 2.0 year 2000 sohc.


    None really because of the engine harness. and also what the car is equipped with such as features.

    Mar 12, 2009 | 2000 Ford Focus

    1 Answer

    2000 ford escort se 2.0L sohc timming belt


    the easiest way to help you is you can purchase a repair manual for your vehicle at an auto parts store like napa,Oreillys or auto zone the manuals are around 20 dollars and have all the specifics you will need to do this your self. these manuals have diagrams and step by step instructions. good luck and hope this helps you.

    Aug 28, 2008 | 2000 Ford Escort

    Not finding what you are looking for?
    2000 Ford Focus Logo

    Related Topics:

    150 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5470 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...