Question about 2000 Buick Century

1 Answer

Both of the turn signals do not work. The hazard lights only work in the back. I looked at the fuzes on the passenger side, and they are still good. What can I do to get them to work?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Buick Master
  • 373 Answers

It sounds like you have at least two bulbs out in the front. I suspect that both turn signals did not stop at the same time? Check the front bulbs. Many turn signal bulbs have two filiments; one for parking lights and the other for turn signals. The same filiment is used for turn signals and hazards.
Another possibility is that there is a bad or broken ground wire in the front?
Finally, it could be the turn signal switch.

Posted on Apr 05, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

op212148
  • 46 Answers

SOURCE: no hazard lights. no turn signal on driver side.

check bulbs and relays

Posted on Mar 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have all light low, high, all turn signals, but my front right (front passenger side) Emergency Light is the only one that works for the Hazard Lights? Fuses check out good and I believe the relay i


What is your year--make--model? I'd look up wiring for hazards if I knew which vehicle? Your hazards may work through multifunction switch? As far as one headlamp being dimmer, check voltage and ground compare to other lamp/s.

Maybe the headlamp lens needs cleaning?

Feb 16, 2015 | Cars & Trucks

2 Answers

My turning signals wont come on my 98 honda accord


do all 4 hazards work?
passenger side, light what is that. inside car, or out, if out that is parking side lamps. they are burned out. if only they are out. bad bulbs
the fuses for blinkers and hazzard must be checked first.

Jan 02, 2014 | 1998 Honda Accord

1 Answer

Turn signal and brake lights not working properly how do i fix this


turn on your hazard flashers then off again some times dirt gets arround this switch and causes funny things like that to happen. good luck

Feb 06, 2013 | 1988 Chevrolet G20

1 Answer

Brake Lights all of a sudden not working on my 1995 Tahoe. Checked fuses and lights. Neither burnt out.


The turn signal switch and the hazard switch are likly places to look. To checjk the fuses is'nt to take them out and look at them but to test to see if power will go though them, I use a test light ( a tool that looks like an ice pick with a wire coming out of the handle and the handle is clear with a light bulb inside). with the clip connected to a good ground as you touch the back sides of the fuses the light will light if it only lights on one side, the fuse is blown ( does'nt matter what it looks like ) a bad fuse can look good. the turn signal switch is involved as is the Hazard switch. If you pusth the hazard switch and the lights light good then you know that the lights and the sockets are good. You also know that the wires are good . With the key on the turn signals should work front and back ( thier different cicruits) If only working in the front the turn signal switch is bad provided the hazards worked all the way around. Does the high mount stop light work? It works off of it's own circuit on the brake light switch and if no lights work your back to the fuses only after you checked to see if the high mount bulbs are good. Your car is plenty old enough to have them be burnt out. If the high mount doesn't work with the bulbs known to be good and then you check with the test light to see if the power isd getting to the brake light switch. One wire is hot with the key off and another comes hot with the key on ( the cruze control switch in the brake light).

Aug 30, 2011 | 1995 Chevrolet C1500

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Don't have turn signals and its not my fuzes.


Look under the left side of the dashboard for a turn signal flasher. Most vehicles have two flashers; one for the turn signals and one for the hazard lights. If your hazard lights are working, follow the "ticking" sound...this is NOT the flasher that needs replacing. Look for the other flasher and replace it.

Apr 09, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

No turn signals or hazards???


Check the FLASHER unit; the turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side. Replace the flasher by unplugging the old one and plugging in the new one.

Hazard flasher -->> The Flasher is located: Front seating area, passenger side, under dash, below glove compartment, mounted in fuse panel

Turn signal -->> The Flasher is located: Front seating area, driver side, under dash, mounted on passenger side of steering column

Good luck (remember comment and rated this).

Apr 23, 2010 | 1995 Chevrolet Monte Carlo

1 Answer

Driver side signals only work when headlights are OFF


What may have happened is either the headlights wiring or the parking lights wiring somewhere along the wiring fused to the left turn signals wiring. Depending on if the turn signals go on when you put the parking lights on or the headlights on.

If the signals come on when you turn on the headlights than you only need to locate the light green wire that comes off the left turn signal harness.

Next follow that wire the entire way back to the firewall looking for another wire fused to that wire as you go.

If there are no signs of this you need to continue looking on the other side of the firewall all the way back to the turn signal and hazard flasher unit which is a black box that connects to a black harness located next to a grey harness behind the knee bolster.

But if the signals come on when you turn on the parking lights than you will also need to check the wiring from the rear left signal and follow that light green wire all the way back to the turn signal and hazard flasher unit.

This should fix your problem, but if not than your problem may lay within the the wiring between the turn signal/hazard switches and the turn signal and hazard flasher unit.

Also you may have a burnt circuit in the junction block. This block is where the light green from the rear left signal and front left signal meet. Don't have a description but if you cannot find it let me know and I will go out to the yard and look myself and let you know.

Apr 22, 2009 | 2004 Dodge Intrepid

1 Answer

Right turn signal not working on 1992 Ford Explorer Truck


turn on the hazard light so you can identify the bulb that is actually deffective. the procedure to replace can be found on youtube.

Mar 10, 2017 | 1992 Ford Explorer

Not finding what you are looking for?
2000 Buick Century Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...