Question about 1999 Plymouth Neon

1 Answer

I have a 96 Plymoth Neon and I am not getting spark.. It have spark through the clip and the coil pack.. But when i put the test on the coil back and the spark plug wire( which is attached to the spark plug) it lights up...but the light is very faint. I was told I could need a cam sensor, a crank sensor, or a new computer. I know the computer is good... The code is reading a 5 but i dont have a Hyanes manual for the car. If any one could help me out I would really appreciate it..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Plymouth Master
  • 715 Answers

There is no OBDII code for you car that is 5, your crank and cam sensor is what tell the computor when to send a signal to fire the cylinder, sounds like a weak coil, you can take it off and autozone can test them, I don't recommend buying one from them, get a good one from the dealer, it's a little bit pricey, much better part.

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 plymoth neon crank sensor


If there is spark to cylinders 2 & 3 than it is not the cranks sensor. Cylinder 1 & 4 are on the same coil and cylinders 2 & 3 are on the other coil. Replacing lithe coil pack will likely solve you lack of spark on cylinders 1 & 4.

Apr 08, 2013 | 1997 Plymouth Neon

1 Answer

I have a 98 vw jetta gl ABA and it wont start run.


I would check for spark on the ignition coil and the spark plug. If no spark, check the power and signal to the ignition coil. The ignition coil large wires are 12volts power and the other three is a signal to electronic firing circuit from ECM. Testing the power is easy, for testing for trigger signal, use a 12v LED test light.
12 Volts test:
http://i222.photobucket.com/albums/dd236/pulga1952/VW/Ignitioncoil.jpg
Signal test:
http://i222.photobucket.com/albums/dd236/pulga1952/VW/Ignitioncoilharness.jpg

Jun 04, 2017 | 1998 Volkswagen Jetta

1 Answer

We replaced the Water pump and Timing belt on a 1999 Plymouth Neon 2.0 Single Overhead Cam Engine. Engine Cranks, Is getting Fuel...but no spark. We changed the Coil Pack. It still cranks, but no...


If its not getting spark the choices are limited. You already replaced the coil pack so whats left is ignition module, crank sensor, knock sensor, cam sensor, or the timing was not was not set properly when putting it back together. Any one of those would create a no spark situation.

Mar 17, 2011 | 1999 Plymouth Neon

1 Answer

Hi, I own a Dodge Neon 2005, Came home from a week vacation to find a Rabbit had decided to eat through 3&4 spark plug wires and the coil pack wire harness. unfortunately I didn't know this before...


Hi,
I would be looking around for any other munching by varmits. Your ecm is under the hood. Critters could have taken out more wiring. look under battery area and ecm area for starters.

Jan 05, 2011 | 2005 Dodge Neon

1 Answer

1999 plymoth neon 3rd cylinder misfire


no. 3 plug, wire or coil pack. Remove the plug wire one inch from the plug using a properly insulated plug wire tool with the engine running, if you hear a tick, tick sound then it's the plug if you don't hear a tick tick sound it means it's the wire or the coil.

Sep 07, 2010 | 1999 Plymouth Neon

1 Answer

Just replaced the coil pack on my 98 neon the one i took off blew up so i put a brand new one on and now the car will not fire what so ever any ideas?


did you put the spark plug wires back right? check the electric connector to see if the pins are not bent and not making connection

Mar 07, 2010 | 1998 Dodge Neon

Not finding what you are looking for?
1999 Plymouth Neon Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...