Question about 1999 Mazda 626

1 Answer

P1127 HO2S Bank 1 Sensor 2 Heater Not On During Key On Engine Running Self Test

We replaced the downstream o2 sensor and can't get the test to run, I'm new to mazda's. help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 60,769 Answers

You have to drive the car for a certain number of drive cycles for the test to be run by the OBD II system, certain criteria have to be meant for self test to start, it may take days before it completes. Be patient.

Posted on Aug 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I am getting Faulty codes P0036, P0056, P0141, P0161 in reference Bank 1 and Bank 2 for sensors 2 on 2003 CTS.I was told the sensors where changed but codes still appear?


If the sensors were replaced an DTC'S come back has to be a wiring problem or PCM ,
The ECM detects that the HO2S heater low control circuit voltage is between 2.6-4.6 volts when the heater is commanded OFF, indicating an open HO2S heater circuit.
Is the fuse open?
All four codes refer to the heating element circuit ! there is a relay in the under hood fuse box that supplies B+ voltage to the O2 sensor heating elements . I would change that or test the relay , videos on you tube on testing relays .
MAIN Relay
--
LO SPEED Relay, HI SPEED Relay, S/P FAN Relay, PRE O2 Fuse, IGN-1 Fuse, ECM Fuse, POST O2 Fuse, and INJ Fuse
Also check
POST O2 Fuse
10 A
HO2S Bank 1 Sensor 2 and HO2S Bank 2 Sensor 2
PRE O2 Fuse
10 A
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 and HO2S Bank 2 Sensor 1

Jul 23, 2016 | 2003 Cadillac CTS

2 Answers

How many o2 sensors a Cadillac Deville 2000 has. I find 3 and replace them but still I have P0155 code for B2S1? Need help!


Which engine ? Some have four and always double check the connections as they can set the codes .

Mar 01, 2016 | Cadillac Cars & Trucks

1 Answer

Have a Ford fusion 06 Have p0141 code I fix the oxygen sensor but the codes still comes on?


Did you replace the right one ? This code does not necessarily mean the O2 sensor is bad . The code description say O2 heater " CIRCUIT " bank 1 sensor 2 Did you check the wiring , the fuse ?
P0141 - O2 Heater Circuit (Bank 1, Sensor 2) Description: See the description for DTC P0135. Possible Causes: See the possible causes for DTC P0135. Diagnostic Aids: See the diagnostic aids for DTC P0135. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DW . P0135 - O2 Heater Circuit (Bank 1, Sensor 1) Description: During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. The test fails when the current draw exceeds a calibrated limit or an open or short circuit is detected. Possible Causes:
  • Vacuum hose disconnected on exhaust gas recirculation (EGR) system module (ESM) applications
  • Short to VPWR in the harness or HO2S
  • Water in the harness connector
  • Open VPWR circuit
  • Open GND circuit
  • Low battery voltage
  • Corrosion or incorrect harness connections
  • Damaged HO2S heater
Diagnostic Aids: Check the HO2S electrical connector for damage, corrosion, and water intrusion.
Damaged HO2S heater. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DW .

Mar 31, 2015 | 2006 Ford Fusion

1 Answer

What are the codes for hyundai?



HYUNDAI OBDII DTC

P1100 Manifold Absolute Pressure Sensor Range/Performance
P1102 Manifold Absolute Pressure Sensor Circuit Low Input
P1103 Manifold Absolute Pressure Sensor Circuit High Input
P1123 Lang Term Fuel Trim Adaptive Too Lean
P1124 Long Term Fuel Trim Adaptive Too Rich
P1127 Long Term Fuel Trim Multiplier Too Rich
P1128 Long Term Fuel Trim Multiplier Too Lean
P1134 HO2S Bank 1 Sensor 1 Transition Time Switch (Bank 1 Sensor I)
P1154 HO2S Bank 2 Sensor 1 Transition Time Switch (Bank 2 Sensor 1)
P1166 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 1)
P1167 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 2)
P1168 HO2S Bank 1 Sensor 1 Heater Power Incorrect (Bank 1 Sensor 2)
P1169 HO2S Bank 1 Sensor 1 Heater Power incorrect (Bank 2 Sensor 2)
P1372 Segment Time Incorrect
P1400 Manifold Differential Pressure Sensor Circuit
P1440 EVAP System Vent Solenoid Circuit
P1443 EVAP System Fault (Fuel Tank Cap Missing)
P1510 Idle Control Valve Opening Circuit Shorted (Coil 1)
P1511 Idle Control Valve Command Signal Shorted (Coil 2)
P1513 Idle Air Control Valve Opening Coil Circuit Open (Coil 1)
P1521 Power Steering Switch Input Circuit
P1529 Customer Snapshot Request VIA CAN
P1552 Idle Air Control Valve Closing Coil Circuit Shorted
P1553 Idle Air Control Valve Closing Coil Circuit Open
P1586 Encoding Signal Circuit Not Rationale
P1602 Serial Communication Fault with Transmission Control Unit
P1605 Rough Road Sensor Circuit
P1606 Rough Road Sensor Circuit Not Valid
P1611 MIL Request Signal Circuit Low Input
P1613 ECU Self-Test Failed
P1614 MIL Request Signal Circuit High Input
P1616 Main Relay Fault
P1623 Diagnostic Lamp Power Stage Fault
P1624 MIL On Request Signal//Cooling Fan Relay Low Circuit
P1625 Cooling Fan Relay High Circuit
P1665 Power Stage Group 'A' Fault
P1670 Power Stage Group 'B' Fault

Dec 08, 2014 | Cars & Trucks

1 Answer

Needdiagnosis on 02 toyota siena le 3.0 have problem codes p1135,po141


3.0L V6

Sienna
wild guess, the 1MZ engine?



141 fed code is. (it means B1S2 heater is bad,or wire to it cut or shorted.) below is fSM spec. worsd.





HO2S-12 (Bank 1 Sensor 2) Heater Circuit Malfunction








Number of Trips to Set Code: 2

Trouble Code Conditions:

Engine started, engine running, and the PCM detected the HO2S-12 heater current exceeded 2 amps, or that it was 0.25 amps or less.

Possible Causes:



  • * HO2S heater control circuit is open, shorted to ground or power


  • * HO2S heater power circuit is open (check power from the relay)


  • * HO2S heater is damaged or has failed


  • * PCM has failed



then the factory code p1135 same deal,same reasons B1S1





A/F Sensor-11 (Bank 1 Sensor 1) Heater Circuit Malfunction








Number of Trips to Set Code: 2

Trouble Code Conditions:

Engine started, engine running, and the PCM detected the A/F Sensor-11 (A/FS-11) heater current was less than 0.25A, or that it was more than 8.0A at anytime during the CCM test.

Possible Causes:



  • * A/F sensor heater circuit or ground circuit is open


  • * A/F sensor heater power circuit is open


  • * A/F sensor heater is damaged or has failed


  • * PCM has failed




bar stool answer.

both bank 1 senors (oxygen) are bad. if wires are good.



easy answer ,no?



the PCM never lies. the current IS ILLEGAL,(BAD)

the why takes , inspection and ohms checks , FSM shows this..



your next question is where is bank 1,

its on cylinder 1 side.

your next question is , where is cylinder 1,

it the cylinder that sticks out further to crank front pulley.



front 134

front 246

Feb 27, 2014 | Toyota Sienna Cars & Trucks

1 Answer

Codigos de falla


P1100 Manifold Absolute Pressure Sensor Range/Performance
P1102 Manifold Absolute Pressure Sensor Circuit Low Input
P1103 Manifold Absolute Pressure Sensor Circuit High Input
P1123 Lang Term Fuel Trim Adaptive Too Lean
P1124 Long Term Fuel Trim Adaptive Too Rich
P1127 Long Term Fuel Trim Multiplier Too Rich
P1128 Long Term Fuel Trim Multiplier Too Lean
P1134 HO2S Bank 1 Sensor 1 Transition Time Switch (Bank 1 Sensor I)
P1154 HO2S Bank 2 Sensor 1 Transition Time Switch (Bank 2 Sensor 1)
P1166 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 1)
P1167 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 2)
P1168 HO2S Bank 1 Sensor 1 Heater Power Incorrect (Bank 1 Sensor 2)
P1169 HO2S Bank 1 Sensor 1 Heater Power incorrect (Bank 2 Sensor 2)
P1372 Segment Time Incorrect
P1400 Manifold Differential Pressure Sensor Circuit
P1440 EVAP System Vent Solenoid Circuit
P1443 EVAP System Fault (Fuel Tank Cap Missing)
P1510 Idle Control Valve Opening Circuit Shorted (Coil 1)
P1511 Idle Control Valve Command Signal Shorted (Coil 2)
P1513 Idle Air Control Valve Opening Coil Circuit Open (Coil 1)
P1521 Power Steering Switch Input Circuit
P1529 Customer Snapshot Request VIA CAN
P1552 Idle Air Control Valve Closing Coil Circuit Shorted
P1553 Idle Air Control Valve Closing Coil Circuit Open
P1586 Encoding Signal Circuit Not Rationale
P1602 Serial Communication Fault with Transmission Control Unit
P1605 Rough Road Sensor Circuit
P1606 Rough Road Sensor Circuit Not Valid
P1611 MIL Request Signal Circuit Low Input
P1613 ECU Self-Test Failed
P1614 MIL Request Signal Circuit High Input
P1616 Main Relay Fault
P1623 Diagnostic Lamp Power Stage Fault
P1624 MIL On Request Signal//Cooling Fan Relay Low Circuit
P1625 Cooling Fan Relay High Circuit
P1665 Power Stage Group 'A' Fault
P1670 Power Stage Group 'B' Fault
esta codigo no lo existe in hyundai codigos

Dec 17, 2013 | 2008 Hyundai Tucson

1 Answer

Code p1295


iam posting the hyundai code list i have that the vehicle manufacturer lists

P1100 Manifold Absolute Pressure Sensor Range/Performance

P1102 Manifold Absolute Pressure Sensor Circuit Low Input

P1103 Manifold Absolute Pressure Sensor Circuit High Input

P1123 Lang Term Fuel Trim Adaptive Too Lean

P1124 Long Term Fuel Trim Adaptive Too Rich

P1127 Long Term Fuel Trim Multiplier Too Rich

P1128 Long Term Fuel Trim Multiplier Too Lean

P1134 HO2S Bank 1 Sensor 1 Transition Time Switch (Bank 1 Sensor I)

P1154 HO2S Bank 2 Sensor 1 Transition Time Switch (Bank 2 Sensor 1)

P1166 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 1)

P1167 HO2S Bank 1 Sensor 1 Controller Adaptive Diagnosis Fault (Bank 2)

P1168 HO2S Bank 1 Sensor 1 Heater Power Incorrect (Bank 1 Sensor 2)

P1169 HO2S Bank 1 Sensor 1 Heater Power incorrect (Bank 2 Sensor 2)

P1372 Segment Time Incorrect

P1400 Manifold Differential Pressure Sensor Circuit

P1440 EVAP System Vent Solenoid Circuit

P1443 EVAP System Fault (Fuel Tank Cap Missing)

P1510 Idle Control Valve Opening Circuit Shorted (Coil 1)

P1511 Idle Control Valve Command Signal Shorted (Coil 2)

P1513 Idle Air Control Valve Opening Coil Circuit Open (Coil 1)

P1521 Power Steering Switch Input Circuit

P1529 Customer Snapshot Request VIA CAN

P1552 Idle Air Control Valve Closing Coil Circuit Shorted

P1553 Idle Air Control Valve Closing Coil Circuit Open

P1586 Encoding Signal Circuit Not Rationale

P1602 Serial Communication Fault with Transmission Control Unit

P1605 Rough Road Sensor Circuit

P1606 Rough Road Sensor Circuit Not Valid

P1611 MIL Request Signal Circuit Low Input

P1613 ECU Self-Test Failed

P1614 MIL Request Signal Circuit High Input

P1616 Main Relay Fault

P1623 Diagnostic Lamp Power Stage Fault

P1624 MIL On Request Signal//Cooling Fan Relay Low Circuit

P1625 Cooling Fan Relay High Circuit

P1665 Power Stage Group 'A' Fault
P1670 Power Stage Group 'B' Fault

Feb 10, 2011 | 2008 Hyundai Sonata

2 Answers

How many oxygen sensors in a 2001 chrysler sebring 3.0


17c3292.jpg

Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine

db6f426.jpg

Fig. Heated Oxygen (HO2S) location (sensor 2)-2.4L engine

99e413c.jpg

Fig. Heated Oxygen (HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine

e2a250f.jpg

Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine

I hope help you with this (rated this help). Good luck.

Sep 09, 2009 | 2001 Chrysler Sebring

1 Answer

Ford f-150 running rough


Ok P0174 Is bank 2 (drivers side) is running lean
P0350 is an ignition coil primary circuit malfunction
P1127 indicates the HO2S heater(s) were not on during KOER Self-Test and testing of the HO2S did not occur.Engine not operating long enough prior to performing KOER Self-Test.
P1780 means that the OD switch on gear shifter was not cycled off then on during self test.
I would recommend re-running your self test and make sure to warm the engine up first and make sure to cycle the od switch on/off during the test and recheck the codes.
P0174 lean code could be caused by a miss-fire and P0350 could be caused by anything in the ignition(coil,plug,wires,etc.).
If the P0174 and P0350 repeat I would concentrate on the cylinders in bank 2. If you have a spark tester you could hook it to each of those plug wires individually and look for a weak spark. or try and unhook each wire one at a time and see if you can find a weak cylinder that way by the amount of rpm drop and replace the components on that cylinder and retest.

Mar 25, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Mazda 626 Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...