Question about Ford F-100

1 Answer

I have taillight and turn signals but wen i press on the brake pedal it blows a fuse any ideas ??

Posted by on

  • brnschoneck Apr 06, 2011

    yes i found it today i jsut bypassed the switch and it was the switch so i have to get one tomm n put it in thanks !!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You have a short some were trace the wires to see were

Posted on Apr 05, 2011

  • brnschoneck Apr 06, 2011

    kkk found it was the switch under pedal

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Taillights are not working. Brakes lights and turn signals fine, but no taillights. Checked the fuse and it's okay. Any ideas?


Try unplugging the connector from the brake light switch( under the dash on the brake pedal arm) Install a jumper in the plug and see if the brake lights come on. If they do, the switch is bad. The new switch must be adjusted correctly or the brake lights will stay on all the time. This circuit has power even when key switch is off.

May 21, 2017 | Cars & Trucks

1 Answer

Dodge ram 1500 wiring diagram


Three places to look. 1) Brake lamp fuse, 2) Turn signal switch and 3) the brake pedal switch. Brake light power comes from the fuse up to the turn signal switch down to the brake lite switch on the brake pedal and then on to the light bulbs. Start by putting the 4 way flasher on. If the brake lites flash, then the bulbs are good. That eliminated the fuse too. so the problem is the other two.

Jan 24, 2014 | Cars & Trucks

1 Answer

2001 isuzu brake lights not working


Not sure what model you have but, looking at the brake pedal to see if the brake light switch is plugged in and the wires not broken is a place to start. Depending if your model has yellow turn lights in the rear is the next place to check. The car or truck is old enough for the bulbs to be burnt out and of course if you were hit of hit something with the brake lights on they tend to fail too. If thiers no yellow lights in the back you can turn on the hazard lights to test the bulbs and connections but if thier yellow your only testing the turn signal lights and you did'nt report that as an issue. The fuse can be blown but if it is theirs likly to be another problem that still nereds to be found. If the car or truck has a trailor connection this has always been a good place to look for troble. If the fuse is blown it's a good idea to watch how the new one blows just to see where the problem needs to be looked for. If it blows just plugging it in the problem is before the brake light switch or the switch it'self. if only after pressing the brake pedal then it can be the wires a badly installed bulb or light socket problem. If it does'nt blow ttill after the brake pedal is pushed then I'd remove the taillights and get the bulbs out and remove them. With the bulbs removed I'd check to see it it's still shorted. if not install them one at a time not reusing any that appear bad replace trhem with new ones.

Jan 02, 2011 | Isuzu Rodeo Cars & Trucks

3 Answers

No brake lights when i push the pedal


Its the signal light switch on the lever.
THe signal switch has all connections relating to the brake lights!
solution play around with the lever and see or get someone to see the brake lights work with the brake pedal down.
My car does the same thing! when i move the lever towards activaiting the high beams the brake lights work.
just gently push on the lever to see the lights go on.
you have to replace the switch and requires removing the steering wheel without setting off the airbag.

Mar 28, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Taillights and signals work but no brake lights?


Check the brake light switch. It should be energized when the switch is depressed. (constant power in and power out only when pedal is pressed) Taillights and signals power through the steering column and light switch. BUT first check the fuses. I seem to remember there being a fuse for the truck brake lights and another for the trailer brake lights. Use a tester and check trailer wiring brake lights. If they work, look for the truck brake light fuse.

Sep 24, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

No brake lights. Fuse good. flashers work


check power into & out of brake switch if good then start testing wire to back untill you find a spot where you lose power

Jul 11, 2009 | 1997 Dodge Dakota

3 Answers

Brake lights don't work on 97 chevy lumina sedan


Had the same issue in the spring. Replace the turn signal switch. A general weakness in the switch in these years. Replacement solved the problem in my 97 Lumina.

May 07, 2009 | 1997 Chevrolet Lumina

2 Answers

Turn signal and brake light problem


Had the exact problem on my 98 ranger 2wd reg cab stepside with the 2.5l 4 banger. Anytime I pressed the brake my passenger side turn signal would light up solid on the dash and the lights outside. I pulled both rear lights and both headlights and turn signals to check for corrosion/loose wires. Nothing. I checked and cleaned all my grounds and fuses. Nothing. Not until I followed my rear taillights wire harness did I find the problem. The two taillights are connected to each other via wire harness. My truck had the harness split with an adapter for trailer brakes. This harness was the problem. It is located under the rear bumper by the spare tire. Simply disconnect two harness plugs going into each side and remove it. Then connect the two plugs to each other. Problem solved.

1_13_2013_9_15_28_pm.jpg

Apr 09, 2009 | 1997 Ford Ranger SuperCab

1 Answer

2001 dodge ram 1500 brake lights


I would guess the brake fuse ( this does not use the same fuse as the tail lights/blinkers) or the ground for the brake light bulb.

Aug 13, 2008 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...