Question about 2006 Mitsubishi Raider

Open Question

Where is cylinder two on the raider - 2006 Mitsubishi Raider

Posted by on

  • texas9403 Apr 05, 2011

    Thank you for the information, saved me a couple hundred dollars.



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


My info says, 123456 for the firing order. The dist rotor moves ccw. It shows odd and even banks, one bank is 135, the other bank of cylinders 246.

Mar 02, 2017 | Dodge Raider Cars & Trucks

1 Answer

2.6l engine. What is cylinder compression supposed to be?

It depends on several factors.
Generally, compression with all spark plugs out should be around 100 psi, but the main thing is that no cylinder is more than 20% different from the others.
So if all are around 80 or 110 thats ok too. One cylinder that is more than 20% higher or lower from the others is not good.

Oct 15, 2015 | 1987 Dodge Raider

1 Answer

1987 dodge raider 4 cylinder love the car ... but ... when driving in cold weather, like near 0F, the car slows down, and dies then restarts after 30 minutes or so suggestions ?

So she does. If it carbureted then check the choke, it electric or heat operated from the exhaust.
What happen whent it get cold. There the thermoal spring in the choke cools down make the butterfly on the coke close. install new electric coke or a kit for the manifold head coke control.

Aug 22, 2011 | 1987 Dodge Raider

1 Answer

Have cracked cylinder head

It will have to be replaced. I would check at a salvage yard first, might be cheaper there.

Jan 11, 2010 | 1987 Dodge Raider

1 Answer

How do you change the spark plugs on a 2007 Mitsu. Raider 3.7L. I can see a distributorless system attached to the plug, but don't know how to get tot he plug.

Plug is probably under your electronic coil for each cylinder. You need longer spark plug adapter to remove them out.

Dec 30, 2009 | 2007 Mitsubishi Raider LS

1 Answer

Performance exhaust system for a Raider

your raider is a rebadged dodge dakota ,there should be plenty of ex. systems available for that model

Dec 04, 2009 | 2007 Mitsubishi Raider LS

1 Answer


I am assuming that it is the 2.6L (G54B) engine. I am not sure if the 6-cylinder was available in 87. If it is the 4-cylinder engine the starter will be on the drivers side down near the side-bottom of the engine. It looks like a silver tube with usually a black center. All you have to do is unplug the electrical from it (i think it is just one connection) and then unbolt it. Getting to the bolts can be a pain so you will just have to find a way that you can get a wrench in to it. Once you take out a couple of bolts (can't remember if it is 2 or 3) you can just pull it out and pop in a new one.

Sep 08, 2009 | 1989 Dodge Raider

3 Answers


Compare Fuel Estimates for 2006 Mitsubishi Raider Trucks Here's a comparison of EPA fuel economy ratings among the trucks in the 2006 Mitsubishi Raider lineup. As always, your mileage will very likely differ. 2006 Mitsubishi Raider 2WD 6-cylinder Trucks * 3.7L, 6-speed manual, 16 city / 22 highway * 3.7L, 4-speed automatic, 16 city / 22 highway * 3.7L, 6-speed manual, 16 city / 20 highway

May 15, 2008 | 2006 Mitsubishi Raider

Not finding what you are looking for?
2006 Mitsubishi Raider Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides