Question about 2000 Daewoo Lanos

1 Answer

I need to put on the timing belt were do i set the crank and over head cams

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 7,772 Answers

Hi, I'm having trouble linking to you on the chat window, but here is a link to the diagrams you would need. Please let me know if you have any questions. http://www.2carpros.com/diagrams/daewoo/lanos/2000

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am changing the oil pump on a ford fiesta TdCI and I need to know the cam belt timing marks or a diagram on the cam belt


Set the crank to 0 degrees according to the timing marks on the damper, look on the cam pulley for a mark and line it up with the mark on the head. Put the belt on WITHOUT moving the cam or the crank.

Jan 27, 2017 | Ford Cars & Trucks

1 Answer

Need to set timing from scratch on 1993 Mercury Tracer 1.9L


On the pulley, they are marks that line up with a mark on the head. That is TDC for the cam. Then set the crank to 0 on the timing marks. Put the belt back on.

Nov 28, 2014 | Ford Cars & Trucks

1 Answer

Timing belt replacement


There is a mark on the cam pulley that lines up with a mark on the head. Bring the crank shaft to 0 on the timing guide and put the belt on.

Mar 22, 2014 | Toyota Corolla Cars & Trucks

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, look for a mark on the cam pulley and a mark on the head, line those marks up and put on the belt

Feb 12, 2013 | Cars & Trucks

1 Answer

Does my 2003 dodge caravan have an interference engine


Not sure but if doing belt yourself I will give you important tips. 1) before removeing T/Belt set engine to TDC nr 1 there should be marks on the crank and cam (s) gears that line up with a mark on the block / head. 2) prior to removeing tension to belt get liquid paper & mark cam gear(s) & crank gear to point on block / head. 3) mark T/Belt to cam(s), crank, balance shaft if fitted. 4) release tension & remove belt. 5) transcribe marks from old belt to new belt & make sure correct amount of teeth. 6) fit new belt so YOUR marks line up. 7) have tensioner suply presure to belt. 8) turn motor twice by hand to make sure pistons no hit valves 9) Make sure YOUR marks line up if YOUR marks line up it has to be right. 10) Very IMPORTANT if spring tensioner lossen locking bolt again to take up extra slack in belt. 11) tighten locking bolt. 12) put back together.

Jul 11, 2012 | 2000 Dodge Caravan

1 Answer

How do i set the valve timing if i cant see the timing marks on a VW 1.8 20valve golf cylinder head timing chain , i can only find the one on the belt side i have put the cam on TDC for the ex-valve but...


The 2 cams are linked with a chain at the rear of the cylinder head.

The cams need to be set so the slots on the chain sprockets line up with the cam tower caps with 16 links between cam caps.

You cannot see the front crank pulley tdc mark so you need to lock the engine at tdc with a screwdriver jammed into the timing hole on the bell housing after setting engine at tdc or use a DTI
to check to tdc in the #1 spark plug hole.

If the cams have not been disturbed you only need to set the belt cam sprocket to the mark and crank to tdc.....all this means pulling the core support into the service position so the belt tensioner can be locked down and/or doing a complete belt job along with a coolant pump if over 70,000 miles..

Aug 20, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

I own a 2004 accent with 122,000 km on it. Long story short, had to get a new head gasket put on, so rocker cover, cams, everything had to come off. Work was done and everything was put back together. I...


P0340 - Cam Timing

SYMPTOMS/CONDITIONS
of a mistimed camshaft system (all must apply):
  1. Camshafts have previously been removed from the engine.
  2. Engine runs rough.
  3. Vehicle sets P0340 (camshaft sensor code).
  4. Camshaft sensor has been checked with a known, properly operating camshaft sensor.

CORRECT:
The diagram in the manuals should show the timing marks on both cam gears to be on the blue timing chain links.

ghost45_11.jpg

Mar 23, 2011 | Hyundai Motor 2004 Accent

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

How to remove timing belt/head for gasket replacement on 1992 ford laser 1.6


Is this an over head cam? Must be if it has a timing belt. OK, Pull everything off that is in the way, take fotos if you have to remember where everything went, air filter, intake, dist? anything, everything. Fan in the way? Timing cover, Expose the belt, highlight the timing marks on the cam and the crank, put the mark on the belt as well, Pull off rocker cover, Look underneath cam for head bolts, If the cam has to come off, Mark it with a white pen or a junk yard marker, Do not let it move from its position, Pull the cam, pull the head bolts, pull the head off. Check it for flat, see if it got hot and warped. If it did, you will need to get it planed. You might as well get it checked out while you got it off. Get a new gasket on there, no adhesive, no silicone, no glue, dry. You are supposed to use new bolts, but we'll let it slide. They cost about $50. Torque it down according to spec and pattern, Put the cam back on, align the marks, put the belt on, It should line up with the mark, or better yet, it has to. Set the tension on the belt, put the covers back on, you could crank the engine over by hand to make sure it is OK, then put it all back together, to make it easy to spin by hand, pull the spark plugs out. Get all the fan, air filter, intake, wires, cables, etc back on there, check the foto, fire it up. Hope this helps.

Oct 05, 2010 | 1992 Mazda 323

2 Answers

Opel Corsa timing belt replacement


You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.

Jul 31, 2009 | 2000 Acura Integra

Not finding what you are looking for?
2000 Daewoo Lanos Logo

Related Topics:

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...