Question about 2000 Ford Ranger SuperCab

Open Question

Torque setting for rocker arm 3.0 2000 ford ranger

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 27 Answers

SOURCE: Rocker Arms

17-23 Ft/Lbs.

Posted on Jun 18, 2008

emissionwiz
  • 75117 Answers

SOURCE: looking for torque setting for 2002 ford ranger

The bolt torque spec for the 3.0 Vulcan V6 rocker arms is 18-26 foot lbs, I always set it in the middle, so 22 foot lbs will do just fine. If I helped please rate me for fixya.com
Thanks

Posted on Oct 25, 2011

c17hydro
  • 2984 Answers

SOURCE: torque settings for a 1989 ford escort, 1.9L

The answer is tighten the bolts to 17-22 ft lb

Posted on Mar 17, 2009

  • 4336 Answers

SOURCE: Rocker Arm Torque specs for 2000 ford expedition

Ford has had non adjustable rockers. the rocker arms just get tightened down.

Posted on Jul 26, 2010

  • 1 Answer

SOURCE: Need torque settings for rocker arms

7.416666667 ft lbs or 89 inch lbs

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the valve adjustments for Ford ranger 2.5 engine


There isn't any. Just torque specs. Tapping could be lifters, push rods worn, rocker arms worn, or the cam is worn.

Mar 03, 2016 | Ford Cars & Trucks

1 Answer

Looking for torque setting for 2002 ford ranger with a 3l rocker arms


The bolt torque spec for the 3.0 Vulcan V6 rocker arms is 18-26 foot lbs, I always set it in the middle, so 22 foot lbs will do just fine. If I helped please rate me for fixya.com
Thanks

Oct 25, 2011 | 2002 Ford Ranger Regular Cab

1 Answer

What are the torque specifications for a 3.5l v6 1995 ford tarus rocker arm


For each valve, rotate the crankshaft until the valve lifter rests on the heel (base circle) of the camshaft lobe. Position the rocker arm(s) over the push rods, then install the rocker arm seats. Tighten the rocker arm seat retaining bolts to 44 inch lbs. (5 Nm).

Final-tighten the rocker arm retaining bolt(s) to 19-25 ft. lbs. (25-35 Nm). For final tightening, the camshaft may be in any position.

Hope helps.

May 19, 2011 | 1995 Ford Taurus

2 Answers

What is the recomended torque setting for rocker arm nuts on a 289 ford mustang 1966


If all parts on this motor are stock and it is not a high performance engine but a stock windsor unit, there is no actual torque standard for the rocker arm nuts since the lifters are hydraulic. The manual procedure recommends the following:
with the motor off, tighten all rocker nuts until there is no slack between the rocker arm and the tip of the valve stem. Make sure each rocker is on the heel of the cam, this proceedure can be done one cylinder at a time or you can follow the ford V-8 cylinder identification for valve clearence sequence. I like the one cylinder at a time, it's a little slower but I think it's more accurate. after all rockers are set to the above mentioned clearance, start the motor and let the oil pressure build up in the lifters. At this point you should have installed the oil deflector clips on the rockers, just above the oil squirt holes, otherwise, things get a little messy. when the oil pressure is up, tighten down on each rocker until the engine starts to miss. At this point back off enough to clear the engine idle up and move on to the next rocker. Hope this helps.

Feb 10, 2011 | Ford Mustang Cars & Trucks

1 Answer

I need the rocker arm torque specs for 1995 ford f-150 300ci


17-23ft-lbs is the required torque for the Rocker Arms

Jan 08, 2011 | Ford F-150 Cars & Trucks

1 Answer

'89 2.9l, 194,000 mile Ranger


Stuck Valve.Or just about ready to stick.

Oct 12, 2008 | 1988 Ford Ranger

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

Related Topics:

806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...