Question about 2000 Ford Windstar

1 Answer

Hi my horn does not work in my 2000 ford windstar but i dont know where i should look to replace it can you please help me is it in the van or under the hood and in what position thank you very much

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

First check the fuse. On your 2000 it is Fuse #4 on the fusebox in the engine compartment. The horn is located inside the fender behind the left headlight. You get at it by removing 5 phillips screws. The bottom part of the plastic fender liner, and reaching in. A 1/2 socket takes off the bracket, and the wire is connected by a spade lug. It may have come loose.

Posted on Apr 04, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 Windstar front blower intermittently works

Look at the relay. find another relay with the same rateing that you can borrow & still use the car (horn if same) swap relays & test 4 while if ok you know the prob is the relay. I don't think relays are expensive if yoy just wanted to try a newbie.

Jun 02, 2012 | 2001 Ford Windstar

1 Answer

I have a ford windstar 2000 LX and it won't start! Please help me!!

Ok first you need to make sure that the battery was put back in correctly. Positive terminal to positive battery cable.Then if that is correct, check the main fuse's right next to the battery area, they are large and square ensure non of these are broken, or fused.Check all the fuse's in the other fuse box in the engine bay area and also inside the vehicle.
Let me know how you get on.

Mar 21, 2012 | 2000 Ford Windstar

1 Answer

What is stopping my horn from working in my 2000 ford windstar

four letters for you f.o.r.d. i dont know anybody that has a ford and likes it!

Feb 01, 2011 | Ford Windstar Cars & Trucks

1 Answer

2000 windstar horn

Obviously replacing it might help but horns nearly always have an adjustment screw on the case, in a place that is clearly not used for mounting or electrical connection. They have a nut to secure the screw once adjusted so should be easily recognizable. This screw is actually a grounded internal contact and the adjustment may need to be made after years to cause the horn to oscillate again. I suggest you do this outside of town and wearing some kind of hearing protection and spray a little penetrating oil (WD-40 or similar) on the described screw & nut. Loosen the nut, turn the screw very slightly in or out to adjust. Once adjusted, carefully secure the screw with the nut. This will almost surely change the adjustment you just made so you may have to repeat the cycle several times before it is satisfactory.

Jul 05, 2009 | 2000 Ford Windstar

1 Answer

I have a 2000 Ford Windstar. While driving the other day I lost all electrical power. Nothing would work and engine cut off. After sitting for a brief time the van cranked back up and I drove it home. ...

Most probably...a loose electrical connection. Since you mentioned that the electrical power and the engine got cut off and after sitting for a brief of time, the van cranked back up. You need to check the wiring to see if there's any loose connection.

Here, I provided you the link where you can download the wiring diagram for your 2000 Ford Windstar:

This diagram (manual) will help you trace the problem.

Have a great day!

Jun 06, 2009 | 2003 Ford Windstar

3 Answers

Power to everything including sterio but dash while key is out of ignition and will not start when key is in ignition

Might be your ignition switch, or a fusable link from you battery. The switch makes more sense but i have no idea why it would screw up while you were driving. Usuall y that happens when you're starting it or shutting it off.

May 31, 2009 | 2000 Ford Windstar

2 Answers

My Ford 2000 Windstar van is missing

Since you are getting the 171 and 174 at the same time you need to replace the mass air flow sensor.then clear the codes.After which take the car for a drive and let me know how it does.

Mar 08, 2009 | 2000 Ford Windstar

1 Answer

2000 ford windstar van belt diagram!!

There should Be a Factory Sticker under the Hood that gives you the Exact Routing. Check in the Back of the Owners Manual. If not let me Know!

Jan 03, 2009 | 2000 Ford Windstar

2 Answers

Need know which cylinder is number one on 2000 ford windstar 3.8

#1 plug is the 1st plug on passenger side by firewall

Nov 15, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides