Question about Chevrolet Camaro

1 Answer

I have a 1988 chevy camaro z28 and first gear works fine second gear will aonly go to 2500 rpms and then will slip out, unless i punch it, then it will catch the top of third gear. but i cant go lower than 3000 rpms in third and overdrive dont work......please help

Posted by on

1 Answer

Sounds like you need a tranny, or perhaps check the modulator, pull the the vacuum line off of it, if tranny fluid comes out then, the diaphragm is split.

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the rear axel bearings on a 1988 Chevrolet IROC Z28 Camaro


Put car in neutral, remove wheels, calipers and rotors, diff. cover. rotate carrier until you see wrist pin retaining bolt, remove bolt and slide out the wrist pin out of carrier. Next push axle inward to remove inner axle "C" retainer washer then slide axle out of tube. Then pry off axle seal and with slide hammer w/attachment remove axle bearing.

Feb 23, 2014 | 1988 Chevrolet Camaro

1 Answer

My 2001 Chevy Silverado 1500 2WHLDR 5.3L transmission slips from 2500 rpm's in second gear and will not shift into 3rd


Is there anyway you can pull a code? Because it can be solenoid related,for this type of transmission the speed sensor (VSS) is prone to do this,also how is the transmission fluid is it brownish or dark dark burnt , because if it is its a mechanical failure.I can pull a code if in T.O

Feb 23, 2013 | 2001 Chevrolet Silverado

1 Answer

My transmission slips going through second gear if i get my foot in it just a little bit, and it doesnt always go into reverse. if i shift into reverse and it doesnt shift, i have to shift to neutral then...


this problem is a common failure associated with your shift solenoinds inside your tranny. of course a shop is not gonna tell you this because by the time you wanna get it repaired it is usually too late and have already cause damage to your clutch pack and internal parts, thats the main reason why a shop wont mess with just replacing your shift solenoid (aka valve bodie)

Feb 18, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Gear jerking


when it jerks does the check engine light come on? If so find a reputable transmission shop and it is a simple fix. Costed me $88

May 01, 2009 | 1993 Chevrolet Camaro

1 Answer

Gear Jerking in Camaro z28


first of all you need to fix the motor mounts drive shaft hangers and the lower control arm bushings and if you still have a transmission problem . it is in the valve body in the transmission you need to bring it to a good transmission shopas this will be a major tranny overhaul

Apr 21, 2009 | 1993 Chevrolet Camaro

2 Answers

Transmission problem


im sorry to say no it will not.

Mar 02, 2009 | 1988 Chevrolet Astro Cargo

2 Answers

1996 camaro z28 breaks up and goes nowhere when you floor it


I had the same problem and it was my optic spark. They have all failed between 100-140 thousand miles. I bought mine from gm it was expensive 500 bucks but no company has been able to make an after market distributor that will run with the lt1

Sep 30, 2008 | 1996 Chevrolet Camaro

1 Answer

My 1995 chevy camaro z28 will not shift out of first gear.


try cleaning the transmission screen...this will help it shift

Sep 05, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...