Question about 1998 GMC Yukon

1 Answer

How do you set the clock in a 1998 Yukon? - 1998 GMC Yukon

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • GMC Master
  • 78,955 Answers

There are two procedures and it depends on whether your radio has the option of Auitomatic Tone Control. Here are both ways, with and without Auto tone Control.

Setting the Clock for Systems without

Automatic Tone Control

Press SET. Within five seconds, press and hold the

SEEK right arrow until the correct minute appears on

the display. Press and hold the SEEK left arrow until the
correct hour appears on the display.

Setting the Clock for Systems with

Automatic Tone Control

Press and hold HR until the correct hour appears on the

display. Press and hold MN until the correct minute

appears on the display. To display the clock with the

ignition off, press RECALL or HR/MN and the time

will be displayed for a few seconds. There is an initial

two-second delay before the clock goes into the
time-set mode.

Posted on Apr 04, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 Denali radio will not work

Back out of set up. Usually turning them off and on will back out of set up.

Dec 22, 2016 | 2006 GMC Yukon Denali

1 Answer

Everytime I start up my 2010 Yukon Denali, the clock on the panel reads 1 hour more? I reset it and the next time that I start it, it changes again.

Weird, are you resetting the clock and finishing the setting as per your manual. Your navigation zone could be throwing it off, make sure you have correct zone for where you are. press the helpful button, and check video link below.

How to Set Clock and Search Area on 2010 and 2011 GMC full size Navigation

How to Set the Clock on GMC Yukon 2007 2013 2008 GMC Yukon Denali 6 2L V8

Jan 25, 2016 | Cars & Trucks

1 Answer

How do I reset the clock on a Yukon Denali?

Procedure In Owners Manual--If You Don't Have One, Do Yourself A Favor and order one from GM Dealer (parts Department)

Feb 18, 2015 | 2003 GMC Yukon Denali

1 Answer

Adjust the clock on my yukon denali 2003

Most clock adjustment buttons are located on the GM radio below the volume and on/off knob. Look for the hour and minute buttons below and press corresponding buttons to either set the hours and minutes or both. There will either be AM or PM on LED window indicating morning or night.

Oct 19, 2014 | 2003 GMC Yukon Denali

1 Answer

What is the gap size on a 1998 gmc yukon

Hi there:
Spark plugs that you buy, should be pre-gapped for this application... 0.60 is the factory gap

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Oct 04, 2012 | 1998 GMC Yukon

1 Answer

I need to know where is the #1 spark plug on a 1998 gmc yukon

V8 engine? That would be drivers side front. Remember that TDC is number one piston up (On the compression stroke, not exhaust stroke), timing marks at zero.

Jun 05, 2010 | 1998 GMC Yukon

1 Answer

Abs light and traction control light are on 2003 gmc yukon

ok there is a device called a clock spring in the steering..

Remove steering
replace clock spring
clear all error codes..

Mar 26, 2010 | 2003 GMC Yukon XL

1 Answer

I have a 2008 gmc yukon xl and i do not know how to set my clock back one hour

Try going into the manual adjust in the config on the main screen and take the auto time adjust off. Either that or just wait 6 months until it's right again.

Dec 13, 2009 | 2006 GMC Yukon Denali

1 Answer

1998 gmc yukon headlights not working

You may need to replace the auto headlight switch.

Dec 10, 2009 | 1998 GMC Yukon

1 Answer

Clock won t stay set

sounds to me like a diode has failed in the clock. OR, the clock should have 3 wires on the back, earth, constant power and ignition, it sounds like the constant supply has be severed somewhere. Good luck

Nov 19, 2009 | 2003 GMC Yukon Denali

Not finding what you are looking for?
1998 GMC Yukon Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides