Question about 2000 Chevrolet Corvette

1 Answer

Passenger brake lights do not work. turn signals ok. driver side ok.need help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, there are several reasons why your passenger side brake light won't work.
It might be a connection from your brakes lights that are just loose or dirty. If you look at your right tail lights, unscrew then off. Check the wires for anything bad, try using another bulb, check the fuse.
The brake light assemble may even be faulty and needs replacement so you have to check these things one after one after the other to know the main source of the problem...

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No taillights park or dash lights


check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk

Jan 15, 2014 | 1990 Buick Century

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

I have a 1992 GMC Yukon 4x4 blazer just had it in the shop when it came out the lights are all messed up. headlights work high and low. driver side turn signal dont work , passenger side turn signal don't...


If those lights all worked properly before the shop "fixed" it, take it back to the shop and ask them to make it right. If they are reputable, they will correct the problem(s). If not, think Small Claims Court.

Oct 08, 2013 | GMC Cars & Trucks

1 Answer

GMC Envoy 1999 -Brake lights not working (sort of).


bad earth on the bulb holder or the wiring, usually a good clean should sort it out.

Jul 19, 2017 | 1999 GMC Envoy

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

2006 Ford Ranger. Rear passenger side tail light


Bad earth connection.Clean or replce wire.

Jun 18, 2009 | 2004 Ford Ranger

1 Answer

Pass. side trailer turn and brake lights out 1999 ford explorer


if your vehicle lights are working all the fuses will be good. follow the cable from the towing socket on your vehicle , it will most likely go behind one of the rear lights to connect into your cars system,
check your tester where the cables join and you should find the problem. hope this helps.

Apr 23, 2009 | 1999 Ford Explorer

1 Answer

Brake light on driver side works but the passenger side does not


I do not know what you have already tried, but let me start at the most basic first, and work up the list of possibilities. OK?
Have you checked the bulb on that side? The tail light could still work, but Brake/Signal part be out.
Assuming that did not fix it, my next shot would be at the turn signal switch. It is what separates the brake lights from the signals, and would be next in line, unless you can see an area where the wires are damaged underneath.
An easy way to check all this quickly, is to turn on the Hazard Flashers. All 4 should blink, of course, and if they do, the turn signal switch most likely is bad.
Hope this gets you going!

Dec 22, 2008 | 2002 Nissan Altima

1 Answer

Brake lights


If all of the wiring, fuses, bulbs, and switches are good (which is what it seems since everything else works fine including the turn signals on the passenger taillight), sounds like it may just be a bad socket. I have a somewhat similar problem on a 1986 F150.

Jul 27, 2008 | 1984 Ford F 150

Not finding what you are looking for?
2000 Chevrolet Corvette Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...