Question about 2009 Mitsubishi Eclipse Spyder
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Unfortunately, this is not something you can fix yourself. You will need to take the car to either the dealer or a shop which specializes in fixing convertible tops, headliners, etc (commonly called an automotive trim shop) Most used car dealers have a trim shop that they can recommend.
Posted on Dec 23, 2008
There are 7 screws all together to remove the door pannel. First, you have to take off the hanlde for the door. the 2 plastic covers on the handle pop off revealing 2 screws on the top and bottom, remove those. then behind the the door handle on the inside, pull it as if you were to open it and there is a screw that you have to remove. Then there are 2 screws on either side of the door pannel, both are farily close to the top, remove those, and then its just a matter of popping the pannel off. start from the bottom, pop it off then slide it up. becarefull, after the door panel is free, there is a connection for the power doors and windows unhook that then the pannel will be free. after that the speaker will be right there and its common sense on removing that. good luck.
Posted on Apr 02, 2009
There are 2 motors in the back located behind the speaker pannels on each side of the back seat. fist make sure they are both working. second there is a switch inside your trunk on the drivers side loceted behind the trim pannel to the tail light to switch from motors to manual top removal. third if your still lost the suport bar closest to the front of the top (not the one against the window with the clips) but the silver one has 2 smal black piviting bars on each end that sometimes get stuck try manualy removing the top and pushing that bar to the back of the car. Hope this helps you
Posted on Jun 14, 2009
SOURCE: I have a 2008 Mitsubishi
If the top is working fine, but still the convertible top indicator , light comes on dash.Then its the problem of cars computer not seeing the top down.It still thinks that top is not closed and car is running, and so the indicator comes ON.But if top is actually down, then it can be due to convertible getting down bit slow.Its motor and its switch in the latch both needs bit of servicing.-------
You can use wd-40 spray in the latches or any good contact cleaner in the convertible top latches, you can get the top motor greased and the convertible top switch.Get that switch connections also cleaned.---------- This problem many a time occurs due to top getting down timing.----------- FOR example:--- The top comes down in 2 minutes, so when you close the top, the top comes down, but if it takes 2 minutes 10 seconds, then computer triggers that top is not closed.But when you turn off and turn on car, the computer memory again resets and detects the top closed.-------- This timing gets increased, due to top motor getting rusted or latch, switches getting dirty, so it takes few more seconds then actual time and this then triggers the computer to indicate on dash,. that top is not closed.------- Getting this convertible top-- motor, latch and switch cleaned and basic serviced,, like cleaning the dirt collected to the latch, switch.Cleaning it contacts, cleaning its terminals.Should help.------- Thanks.Helpmech.
Posted on Sep 14, 2011
Tips for a great answer:
Apr 03, 2016 | Mitsubishi Eclipse Spyder Cars & Trucks
Aug 05, 2012 | 2007 Mitsubishi Eclipse Spyder GT...
Aug 01, 2012 | Cars & Trucks
Nov 19, 2009 | 2009 Mitsubishi Eclipse Spyder
Oct 27, 2009 | 2007 Mitsubishi Eclipse Spyder GT...
Oct 21, 2009 | 2001 Mitsubishi Eclipse Spyder
Mar 13, 2009 | 2001 Mitsubishi Eclipse Spyder
Nov 18, 2008 | 2003 Mitsubishi Eclipse Spyder
Dec 18, 2017 | 2009 Mitsubishi Eclipse Spyder
Jul 12, 2012 | 2009 Mitsubishi Eclipse Spyder
250 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: