Question about 2004 Hyundai Santa Fe

Open Question

Where is the egr valve located on a 2004 hyundai sante fe. 3.5 litre 4wd

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2001 Hyundai Sante Fe Transmission Filter Location

The filter sits on top of the transmission. look under the hood on drivers side it screws right on top of the transmission. It looks like an engine oil filter.

Posted on Mar 08, 2009

Ad
  • 1 Answer

SOURCE: 2001 Hyundai Santa Fe Ignition coils & EGR Valve

Well I went ahead and took a go at changing the coils, plugs and wires yesterday. It literally took maybe 15 minutes and my hands didn't even get dirty. This is something that the auto place wanted to charge me 650 to do. I spent 200 on parts. I didn't realize the coils were the things sitting on top of the spark plugs. I think my 4 year old could've done it. All I had to do was unbolt the coils detach the wires and then replace. It was too simple.

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: I have a 2004 hyundai sante fe - hesitates at 40-43 mph

my car run heavy during sarting

Posted on Jun 21, 2009

  • 115 Answers

SOURCE: 04 Sante Fe 2.4L no spark no rpm pulse

rpm is regulated by the crank position sensor in all hyundai cars did one today

Posted on Sep 04, 2009

SOURCE: Ho to replace serpentine belt. cant find anything

There probably won't be any adjustments. Serpentine Belts have be used for 25 or 26 years to my memory ,and have spring loaded tensioners to keep belt tight. So I quess your new to the car world. You release the tension with a long 1/2" Drive ratchet or tool specific for belt replacement. If you need to buy any tools you don't have, your better off leaving it to the pros

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai sante fe 2007 2.2crdi wont rev past 3000 rpm


If your standing still in park it wont rev past 3000 rpm as its got a limiter on it And only revs past 3000 rpm in drive on the move.

Sep 27, 2016 | 2007 Hyundai Santa Fe

2 Answers

Location of ignition mod 02 hyundia sante fe


Only the 4 cylinder uses a stand alone ICM. If you have a 4 cyl then the module may be attached to the valve cover. See picture.
26227045-ksqvf2f1jj4orad3gkvfxz23-1-0.jpg

Jun 27, 2016 | Cars & Trucks

3 Answers

2004 Hyundai Santa Fe with very low gas mileage.


The Fuel Economy of the 2004 Hyundai Santa Fe is listed as being 16 mpg in the city and 22 mpg on the highway.----------------------------------------------------------------------------------
Digiprog3 Odometer Correction Tool

Feb 21, 2013 | 2004 Hyundai Santa Fe

1 Answer

2004 Hyundai Sante Fe difficulty starting after fill up bulletin boards indicate that it may be a purge valve do you agree and where is this part located on the vehicle.. Thank You


Yes, the PCSV (Purge Control Solenoid Valve) is usually the cause of difficulty in starting the engine after refueling. The 2004 Santa Fe came with three different engines and this valve is located in different places on each engine (2.4 (4 Cylinder), 2.7 V6 and the 3.5 V6). Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc

Sep 11, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

PO401 code car idles fine how do I fix? Yellow stripe hose clamped egr does not work if I put vacuum directly to egr it will work. Hoses look good. I think might be egr solenoid has office inside. 2004...


Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open

Clean out the EGR valve and/or tubing to remove deposits

Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)

Replace the DPFE sensor (with a good quality / OEM one)

Replace the EGR valve

Aug 18, 2011 | 2001 Hyundai Santa Fe

1 Answer

2.4 Hyaendai Sante Fe GL - 4WD - are these full time 4WD or is there a choice?


Hi,
Unfortunately this is unable to be changed. You don't have the option to change from 4WD to 2WD. This is all part of the drive stability of the vehicle.
Thanks
Jason

Apr 10, 2011 | 2004 Hyundai Santa Fe

2 Answers

Check engine light comes on for 2004 Hyundai Sante Fe. O2 sensor was replaced but still has the problem. Does the EGR manifold tend to get clogged up on the Sante Fe? I fixed a Honda Civic check engine...


First of all, why was the O2 snsr replaced?... Check Engine light? What DTC (diagnostic trouble code) did you find stored in the ECU (Engine Control Unit)? The drivability you seem to be describing can have multiple causes -- faulty sensors, malfunctioning computer, clogged catalytic converter, leaky injectors, vacuum leaks, etc.

Ok... this is gonna take some time. The 04 Santa Fe came with 3 (three) different/possible engines -- the 4 Cylinder 2.4 lit, the 2.7 V6, and the 3.5 V6. Only the 2.4 (4 cyl) and the 3.5 V6 are equipped with EGR. The 2.7 does NOT have EGR. To answer part of your question, the EGR system on the 4 Cyl is known to develop restriction(s) in the EGR port (from the # 4 cylinder exhaust port to the EGR valve at the intake manifold). This port travels through the head (front to rear, i.e., Left to Right when viewing the engine from the transmission end). This port cannot be seen at the # 4 cylinder exhaust port unless you remove the exhaust manifold.

It would be very helpful if you could provide more detailed/specific information regarding the drivability issue & what/which codes were found related to the Check Engine light.

Feb 12, 2011 | 2004 Hyundai Santa Fe

1 Answer

What is the litre size of a 2002 hyundai sante fe?


The 4 cylinder engine is 2.4 litre, and the v-6 is 2.7 litre.

Jan 03, 2011 | 2002 Hyundai Santa Fe

2 Answers

Where is the purge valve located on a 2004 santa fe?


You have not responded CLEARLY!... which ENGINE?

Oct 30, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

Related Topics:

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...