Question about Volkswagen Polo
Try to unplug the fuse of the radio it will erase the ecm but make sure the car is off ok but wait for 1 minute then put it back or u can buy the module if they are broke.thanks god bless
Posted on Apr 04, 2011
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 23, 2017 | Seat Cars & Trucks
Nov 16, 2016 | Cars & Trucks
Sep 09, 2016 | Seat Ibiza Cars & Trucks
Nov 26, 2014 | 2000 Seat Ibiza
Jul 20, 2014 | 2006 Seat Ibiza 1.4
May 08, 2014 | 2006 Seat Ibiza 1.4
When the service engine soon light a yellow light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Nov 30, 2012 | 2008 Chrysler Pt Cruiser
following are the general instructions on the start of diagnosing any
electronically controlled engine or transmission problem.
The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.
Nov 01, 2012 | 2000 Seat Ibiza
May 10, 2010 | 1998 Audi A4
Mar 22, 2009 | 2001 Volkswagen new Passat
May 20, 2018 | 2006 Volkswagen Passat
637 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: