Question about Ford Festiva

Open Question

How to replace clutch on Ford Festiva 1999 1300. How to change thrust bearing

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
DJ JDG
  • 2 Answers

SOURCE: Clutch replacement details for 1996 legacy GTB

Trust me it is quite an excercise and not worth doing yourself. With the proper tools, a hoist and a my mate who is a Guru Subaru Mech it took 4 hours. Without having done it before and without the Hoist ( which is wha I was going to do initially ) I'd say you wouldn't get much change out of 8 - 12 hours.

Posted on Jan 01, 2009

Ad
  • 150 Answers

SOURCE: how easy is it to replace a noisy clutch thrust

The thrust bearing is normally a part of a new clutch kit.Comprises pressure plate, clutch plate and thrust bearing.You will need to remove the gear box to change the bearing.The bearing basically slides onto the gearbox shaft. Recommend changing all three rather than just the beaing.You may want to get quotes from garages as dealers are expensive.

Posted on Mar 08, 2009

VWdan
  • 114 Answers

SOURCE: sending unit on ford festiva 1999

its in the gas tank

Posted on Apr 24, 2009

collegetutor
  • 125 Answers

SOURCE: ford festiva front wheel bearing worn out

I do have the manual and there are several on eBay all the time for Festivas, because I check there often for Festiva parts. They are often sold for about $20-$25 for the complete manual. You might want to try that. I have the manuals for Festiva, but I don't have a scanner, but I do have a digital camera that I could use to photograph it. I don't know if I can get your email address so that I can send the photos of the pages to you. Let me know.

Posted on Sep 12, 2009

bambarm
  • 25 Answers

SOURCE: ford festiva indicator light replacement

To change the rear light indicator bulbs in the Festiva, you need to remove the cover in the rear compartment area if its in your way and then reach in press the release tab to pull out the blub and wire unit and then turn the bulb 1/4 turn to remove the bulb and replace it with the new one and reassemble.

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I did change the complete cluch with the origional from the supplier, but the problem stay, The gearbox is still a cast iron type, and has a hydraulic sustem with a lollypop type fork, there is a constant...


So the hydraulic clutch is keeping pressure on the fork and the throw-out bearing (U.S. slang for clutch release bearing?) or thrust bearing is always running against the fingers on the pressure plate, is that the problem? And of course it burns out the bearing rather quickly?
You will have to examine all the parts, the slave cylinder and it's shaft, the fork and it's pivot point. Something in there not allowing the bearing to pull back far enough from the pressure plate so that it stops rotating. Is your pedal adjusted right? Maybe start there-the pedal has to allow a fraction of free play. Otherwise it is always putting pressure on the hydraulics.

Aug 23, 2017 | 2003 Ford Focus

1 Answer

I'm hearing some knocking sound in the gear box for my ford festiva 1991, some one told me it's the choke bearing but I'm googling that name but seems there is nothing by that name. Can so


Standard Shift trans it is a Clutch Throw Out
bearing that releases the clutch

When they go you resurface the flywheel & install a new
clutch & pressure plate,your worn bearing & slave hydraulic
clyinder also

About $1000 job (US)

Jan 23, 2013 | 1993 Ford Festiva

1 Answer

Ford festive clutch making a loud noise like its braking the teeth of the fly wheel is it or does some think else sound like that car makes this noise weather it is in gear or not , only just manage to...


hi this could be a couple of things, first the clutch thrust bearing might be u/s this would make a grinding/humming noise, if its a knocking noise, it could be the big ends are warn and the shells need to be replaced, or worse still a new engine...hope this helps

Sep 08, 2010 | 1991 Ford Festiva

3 Answers

The clutch in my 1983 Chevy truck rattles when I push it in


the thrust (release) bearing is worn, not a big deal in itself as it will last a long time like this, but if the noise annoys you the bearing is very cheap, though to change it means removing or pulling back the gearbox so if the clutch is not new you could replace the whole lot as easily while in there

Jan 14, 2010 | 1983 Chevrolet Silverado

3 Answers

Clutch is noisy,when i depress the clutch the noise goes away


this noise is caused by a noisy clutch throw-out/release bearing, that is the part that presses against the pressure plate and disengages the clutch disk, the transmission must be removed to replace this part, so it is best to replace the clutch assembly at the same time, the labor for both is the same, about 5 hours

Oct 23, 2009 | 2003 Toyota MR2 Spyder

1 Answer

1995 ford ranger wont go into gear grinds trying to go into reverse.


This is sign of a bad thrst bearing, try toadjust the clutch if not working, replace clutch, thrust bearing and pressure plate.

Jul 18, 2009 | 1998 Ford Ranger SuperCab

1 Answer

How easy is it to replace a noisy clutch thrust bearing. 53 plate Ford Focus 1.6 petrol zetec.


The thrust bearing is normally a part of a new clutch kit.Comprises pressure plate, clutch plate and thrust bearing.You will need to remove the gear box to change the bearing.The bearing basically slides onto the gearbox shaft. Recommend changing all three rather than just the beaing.You may want to get quotes from garages as dealers are expensive.

Mar 08, 2009 | 2003 Ford Focus

1 Answer

Slipping clutch


when you replace the clutch... always replace the thrust bearing as well.

Robert

Dec 17, 2008 | 2005 Porsche Carrera Gt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...