Hi, is this all you needed? This engine uses colored links that line up to marks on the timing gears. Please let me know if you have any questions, and thanks for using FixYa.
Hi, the dual cams are aligned by turning so that the dots on the gears are straight up. Then the chain is wrapped on so that the colored links are centered on those dots as in the picture above.
Sorry, but for some reason the pictures has disappeared. I will try again. First setup the front gears like this:
The little indent in the crankshaft gear must align with both the arrow and the colored link:
The top gear marks go straight up with the colored links centered on the marks:
Then put the smaller chains on the intake camshafts and slip the exhaust camshafts in such that the marks on the smaller gears align to the colored links:
I have 3 screw that I dont know where to put. one is 10.9 and two are 9.8
×
Remove the timing belt.
Crankshaft and camshaft timing marks-2.4L engine
Timing belt tensioner-2.4L engine
Camshaft sprocket alignment-2.4L engine
Timing belt installation-2.4L engine
Timing belt tension adjustment-2.4L engine
Timing belt tension verification-2.4L engine
1,489 views
Usually answered in minutes!
both heads have a main cam and a smaller cam i need to know how to align the two with the small chain .can you help
i need to know how to set up the two cams with the small chain.each head has a main cam with a sprocket and a smaller cam the 2 are connected with a small chain so that they both move together.that is what i need to know.
×