Question about Ford Ranger

1 Answer

Seatbelt light flashing 47 when first starting then stays on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Though I cannot say for sure without a year/make/model I think this is probably an error with the airbag system. A sensor has malfunctioned, I believe 47 is for a seat sensor. As long as that light is flashing the system is OFF, meaning no airbags will deploy if you are in a crash. It may be something simple like the connector under the seat managed to get disconnected, or maybe a wire was pinched and cut, or maybe the component is faulty. I would take it to a shop or dealership and let them run a true inspection on it. The airbag system is not something you want to mess around with.

Posted on Apr 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn off seatbelt light 1999 vw beetle


There must be a wire connection to the seatbelt you left off? Some switch at the reel, some on the stork / catch end

Jun 24, 2015 | Cars & Trucks

1 Answer

Security light flashing


I have this problem if I jump in and start the car too quickly. It will shut off and the security light flashes. Thankfully it never happens when I'm on the road! I think it's related to the seatbelt switch. There's a wire under the driver seat connected to a sensor in the seatbelt buckle that tells the computer when the seatbelt is fastened. I tried spraying WD-40 into the seatbelt buckle to clean it, which helped, but it is still loose and intermittent. When it happens the remote won't do anything to get the car unlocked and started. I just have to wait ten minutes for the security system to reset itself.

Jul 21, 2014 | 2002 Saturn VUE

1 Answer

Random blinking of lights on dashboard, then battery out


Could be a weak or failing alternator. Have it tested.

Jul 15, 2013 | 2006 Hyundai Sonata 2.4

1 Answer

Reset Nissan Altima seatbelt light which is flashing


A scan tool is needed to reset the seatbelt light, unhooking the wires turned the light on as a fault, a scan tool will reset code. also make sure all connectors are connected good, the computer may reset itself after it sees a few key cycles and tests the system and it passes but it may take awhile. i have seen some that will stay on until they are reset, if the light is still on after all this time then a scan tool will be needed to turn off the light. good day.

Jan 23, 2012 | 2006 Nissan Altima

2 Answers

Is there a passcode or sequence to disable the


As far as I know that seat belt warning chime and light is there for your safety and protection, it should not be bypassed in any way.
There is no by pass seqwuence or code to eliminate this safety device.
Buckle up, its the law.

May 09, 2010 | 2002 Ford Mustang

1 Answer

1999 ram 2500 4x4 seatbelt light on -not flashing- stays on even with seatbelt on.


check the conectors on the buckels if it's ok then remove pillar cover and check the conector on belt winder

Jan 04, 2010 | 1999 Dodge Ram

1 Answer

Drivers side seatbelt connected When truck is


sensor in the seat belt bukle needs to be replaced

Aug 01, 2009 | 2004 Ford F150

1 Answer

Airbag/seatbelt dash light flashing a code.


the sencors are very bad for going out you could have hit a good bump and now it doens't know what to do but you shoul not have a problem with it like it is if you diside to leave it alone

Dec 04, 2008 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...