Question about 2001 Dodge Ram 3500 Truck

Open Question

Dodge ram 3500. OBD2 Codes detected are p0751 and p0753. I have problem with the shfiting of the gear

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: jeep codes location of unit

Got me a complete manual for 199 jeep factory model and found location of each individual unit in question. Manual gives u possible solution to each code and repair and or replace. As a mechanic myself testing, trouble shooting and repair was not that difficult. Shift solenoid was very difficult to get to. Located under the head lamp passenger side.

Posted on Nov 19, 2008

Ad
  • 29 Answers

SOURCE: Charging problem on 1996 Dodge Ram 3500 Cummins Turbo Diesel

I had the same problem on a 94 dodge with the cummins. It seems the crank sensor that reads from a notch on the harmonic balancer was the problem Without this sensor reading that the engine is running the alternator wont charge. Possibly the same problem with yours

Posted on May 03, 2009

  • 138 Answers

SOURCE: 2001 Dodge Ram, 3500, CTD 5.9, AT, 2WD, No Bus

No bus error code has nothing to do with your fuse panel this is a ECM /ECU error code... sorry but get ready to spend some money for a new ECM

Posted on Sep 13, 2009

  • 474 Answers

SOURCE: dodge ram 3500 won't shift into overdrive

it may of fried your powertrain control modual "PCM"

Posted on Nov 09, 2009

mrgreenz
  • 962 Answers

SOURCE: fault codes 2001 dodge 2500 truck p1594 p0753

p1594 means the charging system voltage is too high. p0753 means the electrical solenoid 'A' has a problem. probably went bad and caused the other code p1594 to happen. replace solenoid.

Posted on Nov 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy malibu damage Light front end damcodend error codes P0401 P0605 P0842 P0642 The 0401 code is being thrown twice and I belive it is the egr wich is common on these cars from what my buddy tells...


DTC P0401 Exhaust Gas Recirculation (EGR) Flow Insufficient
Probably plugged passage's , not the EGR valve .
What type code reader are you using to read these codes ? I have factory service info. Doesn't show P0842 or P0642 , no such codes . You don't show what engine yours has , I'am assuming you have 3.5 L !
P0604
Control Module Random Access Memory (RAM)
PCM
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 2.2L (L61)
or
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 3.5L (LX9)

P0717
Input Speed Sensor Circuit Low Voltage
PCM
DTC P0717 in Automatic Transaxle - 4T40-E/4T45-E
P0741
Torque Converter Clutch (TCC) System - Stuck Off
PCM
DTC P0741 in Automatic Transaxle - 4T40-E/4T45-E
P0742
Torque Converter Clutch (TCC) System - Stuck On
PCM
DTC P0742 in Automatic Transmission - 4T40-E/4T45-E
P0748
Pressure Control (PC) Solenoid Control Circuit
PCM
DTC P0748 in Automatic Transmission - 4T40-E/4T45-E
P0751
1-2 Shift Solenoid (SS) Valve Performance - No First or Fourth Gear
PCM
DTC P0751 in Automatic Transmission - 4T40-E/4T45-E
P0752
1-2 Shift Solenoid (SS) Valve Performance - No Second or Third Gear
PCM
DTC P0752 in Automatic Transmission - 4T40-E/4T45-E
P0753
1-2 Shift Solenoid (SS) Control Circuit
PCM
DTC P0753 in Automatic Transmission - 4T40-E/4T45-E
P0756
2-3 Shift Solenoid (SS) Valve Performance - No First or Second Gear
PCM
DTC P0756 in Automatic Transmission - 4T40-E/4T45-E
P0757
2-3 Shift Solenoid (SS) Valve Performance - No Third or Fourth Gear
PCM
DTC P0757 in Automatic Transmission - 4T40-E/4T45-E
P0758
2-3 Shift Solenoid (SS) Control Circuit
PCM
DTC P0758 in Automatic Transmission - 4T40-E/4T45-E
P0815
Upshift Switch Circuit
PCM
DTC P0815 in Automatic Transmission - 4T40-E/4T45-E
P0816
Downshift Switch Circuit
PCM
DTC P0816 in Automatic Transmission - 4T40-E/4T45-E
P0826
Up and Down Shift Switch Circuit
PCM
DTC P0826 in Automatic Transmission - 4T40-E/4T45-E
P0973
1-2 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0973 in Automatic Transmission - 4T40-E/4T45-E
P0974
1-2 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0974 in Automatic Transmission - 4T40-E/4T45-E
P0976
2-3 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0976 in Automatic Transmission - 4T40-E/4T45-E
P0977
2-3 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0977 in Automatic Transmission - 4T40-E/4T45-E

Sometimes with code readers they get confused an just throw any old codes . Have it checked by someone with GM Tech 2 scan tool .

Aug 03, 2017 | Chevrolet Malibu Cars & Trucks

1 Answer

2001 Chevy S10 4x4 4L60E transmission works perfectly until 50MPH then I lose 3rd and 4th gear, 1st, 2nd and reverse are normal. Never happenend before, been parked since. Fluid is clean. Any ideas?


Are there any DTC's - diagnostic trouble codes ?in the PCM / BCM ? You have third an fourth below 50 mph but above 50 it down shifts to 2nd gear ,is this what your saying or you don't have 3rd or 4th gears at all ? Which engine did yours come with ? 2.2 L or 4.3 L You trans can set several DTC'S an not all will turn on the check engine light .
DTC B2722 (4.3 L) DTC P0218 (2.2 L) DTC P0218 (4.3 L) DTC P0502 (2.2 L) DTC P0502 (4.3 L) DTC P0503 (2.2 L) DTC P0503 (4.3 L) DTC P0705 (2.2 L) DTC P0706 (4.3 L) DTC P0711 (2.2 L) DTC P0711 (4.3 L) DTC P0712 (2.2 L) DTC P0712 (4.3 L) DTC P0713 (2.2 L) DTC P0713 (4.3 L) DTC P0719 (2.2 L) DTC P0719 (4.3 L) DTC P0724 (2.2 L) DTC P0724 (4.3 L) DTC P0740 (2.2 L) DTC P0740 (4.3 L) DTC P0741 (4.3 L) DTC P0742 (2.2 L) DTC P0742 (4.3 L) DTC P0748 (2.2 L) DTC P0748 (4.3 L) DTC P0751 (2.2 L) DTC P0751 (4.3 L) DTC P0752 (4.3 L) DTC P0753 (2.2 L) DTC P0753 (4.3 L) DTC P0756 (2.2 L) DTC P0756 (4.3 L) DTC P0757 (4.3 L) DTC P0758 (2.2 L) DTC P0758 (4.3 L) DTC P0785 (2.2 L) DTC P0785 (4.3 L) DTC P1810 (2.2 L) DTC P1810 (4.3 L) DTC P1860 (2.2 L) DTC P1860 (4.3 L) DTC P1870 (2.2 L) DTC P1870 (4.3 L) DTC P1875 (4.3 L) .
Shift Pattern This category contains the following topics:
?€¢
One forward gear only


?€¢
Two forward gears only


?€¢
Gear missing or slipping


?€¢
No upshift or slipping upshift


?€¢
No downshifts


?€¢
Non-First gear start


?€¢
Refer to First Gear Range Only - No Upshift .


?€¢
Refer to Third Gear Only .


?€¢
Refer to Second/Third Gear Only or First/Fourth Gears Only .


?€¢
Refer to Slips in First Gear .


?€¢
Refer to Slipping or Harsh 1-2 Shift .


?€¢
Refer to No 2-3 Shift or 2-3 Shift Slips, Rough or Hunting .


?€¢
Refer to No 3-4 Shift, Slips or Rough 3-4 Shift .


?€¢
Refer to No Part Throttle or Delayed Downshifts .


?€¢
Refer to Second Gear Start .

Feb 18, 2016 | Cars & Trucks

1 Answer

Suddendly start running rough and worser on overdrive. Iused scanner it showed p205,p2609and p2149.Please tell me what to do.


Dodge Ram 3500 Questions - I have an 05 ... - CarGurus

www.cargurus.com > Questions > Dodge > Ram 3500

CarGurusAug 28, 2012 - I'm getting a code P2149 fuel injector group B supply volt... ... I'm getting a code P2149 fuel injector group B supply voltage circuit/open. ... 2005 dodge ram 1500 won't move when in gear 38 answers.

Question on codes p0202 and p2149 - Chevy and GMC Duramax Diesel Forum

www.duramaxforum.com > ... > 04.5-05 LLY Duramax Powertrain

Dec 5, 2009 - 6 posts - ‎4 authors
Hi got a 05 3500 running really ruff and throwing 2 codes p0202. ... Number #2 injector Drive fault, incorrect current on a fuel injector circuit (the ...

breaking down on freeway code p2149 - Chevy and GMC Duram


Dec 05, 2015 | Cars & Trucks

1 Answer

1996 plymouth breeze transmission wont go into 2nd Gear


Have you check fluid level ? Is your check engine light on ? You have a bad shift solenoid inside the transmission ,more then likely . Have codes checked ,you mite have P0700 + code
  • P0750 - Shift Solenoid A
  • P0751 - Shift Solenoid A Performance or Stuck Off
  • P0752 - Shift Solenoid A Stuck On
  • P0753 - Shift Solenoid A Electrical
  • P0754 - 1-2 Shift Solenoid Intermittent
  • P0755 - Shift Solenoid B
  • P0756 - Shift Solenoid B Performance or Stuck Off
  • P0757 - Shift Solenoid B Stuck On
  • P0758 - Shift Solenoid B Electrical
  • P0761 - Shift Solenoid C Performance or Stuck Off
  • Nov 08, 2015 | Plymouth Cars & Trucks

    1 Answer

    What are codes 32 and 45 for a 1994 Doge Ram 3500 Van?


    32 - EGR Solenoid circuit. Short or open in the EGR solenoid circuit. Check for loose, broken, or shorted wire in the EGR valve wiring and connectors. Possible air fuel ratio imbalance not detected during diagnosis.

    45 - Trans OD solenoid circuit. Transmission OD solenoid circuit failure. Open or short in the transmission overdrive solenoid circuit.

    Jan 13, 2011 | 1994 Dodge Ram 3500

    1 Answer

    How do I clear the error codes on a 2001 Dodge Ram 3500 diesel?


    You will need a hand-held obd2 scanner to clear the codes. Advanced Auto store will do it for free if you have one in your area. Other part stores will also do it for free.
    You can disconnect the negative battery cable for 10 minutes and replace it, but it doesn't always work. Sometimes the codes are stored in memory and require the hand-held obd2 to clear them

    Apr 19, 2010 | 2001 Dodge Ram 3500 Truck

    1 Answer

    I turned the key to my 2001 dodge ram 3500 and it


    A code P0500 may mean that one or more of the following has happened:
    1.The Vehicle Speed Sensor (VSS) is not reading (functioning) properly 2.There is a broken/frayed wire leading to the vehicle speed sensor 3.The vehicle's PCM is not correctly configured for the actual tire size on the vehicle
    The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor.
    P1693 (M) DTC Detected in PCM/ECM or DTC
    Detected in ECM
    A 9Companion DTC9 was set in both the ECM and PCM which is related to the above DTC code.

    Feb 17, 2010 | 2001 Dodge Ram 3500 Truck

    1 Answer

    Fault codes 2001 dodge 2500 truck p1594 p0753 what do they mean?


    p1594 means the charging system voltage is too high. p0753 means the electrical solenoid 'A' has a problem. probably went bad and caused the other code p1594 to happen. replace solenoid.

    Nov 27, 2009 | 2001 Dodge Ram 2500 Truck

    1 Answer

    Erroe codes on Dodge Ram 3500 Diesel, dually


    The 1682 code is - Charging System Voltage Too Low

    The 1693 code is - DTC Detected In ECM Or PCM

    The 0523 code is - Engine Oil Pressure Sensor/Switch High Voltage

    Jun 11, 2009 | 2000 Dodge Ram 3500

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    173 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...