Question about Renault Sport

1 Answer

HOW TO BLEED A CLUTCH ON A RENAULD MEGAN SPORT 2007

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

Locate the clutch slave cylinder. It will be on the joint of the gearbox and the engine. On it wull be a bleeder nipple with a rubber dust cover on it. Remove the cover, slip a ring spanner of the correct size over the nipple and fit the bleeder hose. Fill the clutch reservoir and have an assistant depress the clutch pedal fully. Open the bleeder nipple slowly and watch for fluid and bubbles to come out. Close the bleeder nipple and let the assistant release the clutch pedal, depress the pedal again and open the nipple. Do this about four times or until no more bubbles are observed coming out of the pipe. Secure the bleeder nipple, remove the pipe and spanner and replace the dust cover. Fill the reservoir and test the clutch. If it does not work properly more work on the system is required.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bleeding slave cylender and clutch


Go to the link and read about the problem and the way to bleed it. How to Bleed Clutch BlueDevil Products

Sep 28, 2016 | 2007 Kia Sportage 2.0

1 Answer

How to bleed clutch cylinder for Nissan Sandra 2010


bleed clutch cylinder Robinny, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Bleeding clutch
Clutch bleed how to
Nissan Altima 2007 2012 Service Manual Clutch fluid On vehicle maintenance...
Help clutch bleeding Fail

Jul 19, 2016 | Nissan Cars & Trucks

1 Answer

How do I bleed the hydrolic clutch on a 1996 Jeep Cherokee Sport


just like all like clutches.
carefully,
it has a bleed valve on the slave, at the bell housing
you bleed it just like brakes.
google that
or youtube that.
10000s or examples. there.
or read the FSM book>
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

posted this answer vast times.. and link 100.s

click boxes for car, then clutch chapter and read.
but does not cover bleeding, this is base line automech 101 knowledge. the book assumes you know 3 things.
1: constant loss of fluid and why.
2: air is system renders it dead.
3: how to bleed clutch and brakes (same) 5ways but same.


  1. gravity bled
  2. 2 man way.
  3. vacuum bleeding
  4. forward pressure bled at cap
  5. reverse bled at slave.
most times it takes 2 ways, in list, unless #5 is done.
air floats up hill is why and clutch lines are vertical. (hard to do)

Mar 03, 2015 | 1996 Jeep Cherokee Sport

1 Answer

How to remove clutch master cylinder and where is it situated on the megane sport 225


slave cylinder can only be reached by removing gearbox. is brake fluid leaking from between gearbox and engine?

Nov 13, 2014 | Renault Megane Cars & Trucks

1 Answer

How to replace the master and slave clutch cylinder


must bet the sport sidekick as all G16 engine sidekicks are cable.
the J18 engine, has hyd. clutch/
see here
remove them, , put in new,
bleed it. same as with simple brakes, no different.
J18 SPORT.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html#sport

Jun 24, 2014 | 1997 Suzuki Sidekick

1 Answer

I NEED TO BLEED THE FULL SYSTEM ON RENAULD KANGOO 0/2 PLATE 1.9 DIESEL VAN


Crack open no 1 injector while a friend turns over engine and it should fire up although I would have thought it would self bleed as I know for a fact that a Ford Escort would have otherwise you may have a leak in the fuel system

Nov 06, 2012 | Cars & Trucks

1 Answer

How do I bleed the clutch slave cylinder on a 1993 Dodge Dakota Sport 2wd?


should be self bleeding if pedal is set correct

pedal rod needs 1/8" free play to clutch master clydinder plunger

fill clutch res slowly let bubbles bleed

then only half strokes on the clutch pedal with 30sec pause between pumps

Mar 19, 2009 | 1993 Dodge Dakota

1 Answer

Renault Megane 1.5DCi Clutch problem


beside bell housing!! good place to start

Dec 02, 2008 | 1996 Pontiac Sunfire

1 Answer

Renault Megane sport 1.6 2000


gearbox needs changed or clutch release bearing

Oct 03, 2008 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4862 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...