Question about 1996 Hyundai Accent

1 Answer

Hello my hyondia accent 1.4 s reg won't star but ignition lights light up but won't start told it was immobliser but don't know what to do to temp start

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i'm guessing here,

my accent 1.5 1996 has an Safety imobilizer linked into the clutch pedal. hold in clutch before starting, else check under the clutch for a small switch this may be the problem?!?

hope this helps.

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 honda civic ex and it's having


I would have the ignition switch checked, not the key switch but whats behind the key switch. Ignition Switch!

Jul 02, 2013 | Cars & Trucks

1 Answer

Peugeot 307 hdi 110. lights left on battery died, put a new battery in. car keeps turning but won't start. immobliser light stays on


the car is imobalised, try disconectint the earth from battery for 5 mins and reconect, car should start

Dec 12, 2012 | Cars & Trucks

1 Answer

I have a 2001 Olds Intrigue that won't start every once in a while. When it won't start the security light flashes so GM told me it was the passcode and I would have to change the ignition switch...


you can not bypass the security in that car, it is built into the main computer, they have problems with the ignition switch screwing up and the only way to start it while the light flashes is to turn the key to ON but don't crank engine, leave on for 10 to 15 minutes until light goes out then start car.

Sep 21, 2011 | 1998 Oldsmobile Intrigue

1 Answer

1997 chevy malibu anti theft system how do I fix this problem The car won't start I believe the car is in the anti theft mode


The late-90's GM Passlock system (e.g. 1997 Malibu, Regal, Impala, etc.) has a part around the ignition tumbler that goes bad and no longer reliably detects the valid key. In that situation, the "Theft System" light will slowly flash and the carburetor is cut off so the engine won't start. The time-out on the system is 10 minutes - you don't have to do anything, you don't have to disconnect the battery, the key can be out of the ignition -- it's just a time delay. After 10 minutes, the light goes out and you can try again (but if the key is again not detected, the light will start flashing again and you have to wait another 10 minutes)
Someone else, who had this problem, told me to remove all other keys from my keyring. The weight of the other keys pulls on the ignition key causing the key to be unreadable. It has been 7 weeks since I have been doing this and have not had a problem

Sep 08, 2011 | 1997 Jeep Cherokee

1 Answer

Y olsdmobile lss 98 is on security light flashing and won t star how to fixed


put key in ignition and turn all the way like your'e going to start it but don't start it. the security light is going to be flashing. leave it for ten minutes like that until the security light turns solid(not blinking). Turn the key to off and then start it. The tumblers in the ignition lock cylinder are no good any more and the ignition switch needs to be replaced and reprogrammed.

Aug 15, 2011 | 1997 Oldsmobile Achieva

2 Answers

Need help Toyota 87 pickup wont start I replace the the ignition coil and distributor it wont start


fuel filter might be plugged if it turns over if it don't its ur starter if that don't work see if ur fuel pump is working

Jun 27, 2011 | 1987 Toyota Pickup

3 Answers

High-low beams not working


Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Jul 07, 2009 | 2006 Hyundai Accent

2 Answers

Fiesta Diesel (Y Reg) intermittent starting(flashing immobiliser)


diesel ,,,just bypass the immobiliser ,20mins work

Feb 11, 2009 | 1999 Ford Escort

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...