Question about 1991 Volkswagen Corrado
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem. The solution is simple; the ignition switch needs to be replaced. This is an easy do-it-yourself project. Here are instructions:
Check for a switch on ebay, they are about $15. After 10 years they wear out.
Posted on Oct 18, 2008
SOURCE: fuse box location
The fuse box or panel, is located under the dash on the far left, next to the parking brake release handle. Looking in this area, you will notic a small black plastic panel. Remove this panel and you will see the fuses.
There is a second fuse panel under the hood, up against the firewall. Remove the large black plastic panel and you will find a row of relays, and a number of large type fuses.
Posted on Nov 18, 2008
SOURCE: headlights flicker all the time
Hi, my name is ricky and im 24 yrs old and from Bronx, N.Y . I bought my 03 impala in 04 and i had the same problem in 2007 in which that clicking noise happens. The headlights flicker, and even the gauges inside the car would flicker at times. It has nothing to do with fuses or a relay, please dont spend money on that b.s. like i did..lol I will try my best to explain what i did so that you can save some money and time. READ EVERYTHING AND USE ADVICE AT YOUR OWN RISK.
1st of all - I went to a junk yard/auto salvage yard to find a USED part that i needed. Often there are good parts from cars that have been totalled.
2nd- What i asked for was a Body Control Module. This controls most of the electric issues you are having and costed me about 50 dollars compared to a new one that was over $200 and reached up to $500.
3rd- I went head first under the steering column and found where the BCM was located. Poke around to find it cause it is def. there, hidden well. It doesnt take special skill to remove it or find it.
4th-Replace the BCM, but be advised that after you do this, your car might not crank over.My car did crank over because i installed a automatic starter previously so i could have started it with the remote start.
5th- you MUST take the car to a chevy shop so they can Program your car to the body control module this costed me about $250.
All together this information has to help you in someway.
If you have further questions or would like to make a comment, then e-mail me at " email@example.com "
I hope this helps...im not saying it is a 100 percent guarantee for you, but i had this same problem recently and this was the answer to my problem. By the way, never buy a american car again or a GM product for that matter...Kudos
Posted on Dec 19, 2008
are you sure the bulbs are o.k.? if they dont work on both high and low you have ground wiring problem. ground the black wire at the plug with lights on.
Posted on Jan 29, 2009
ya its is prolly the bulbs, open your hood. look behind your headlamps, some have covers for the low beam and high beam. if there are covers turn on your high beams so you will know which bulb is your lowbeam. if you can unplug them. after cover is removed and you can acces the bulbs. they either twist out, lefty lossey. or they have little metal retainers that you have to move a certian way before you can swing the retainer out. its like a door you just have to unhook the proper side of retainer and the other side will be hinged. use a flash light and look at it close. good luck
Posted on Jan 29, 2009
Tips for a great answer:
Mar 03, 2013 | 2004 Chrysler 300
May 05, 2017 | Cars & Trucks
Jun 15, 2017 | 1987 Toyota Land Cruiser
Nov 13, 2011 | 2006 Buick LaCrosse
May 20, 2010 | 1992 BMW 5 Series
Apr 26, 2010 | 1998 Chevrolet Camaro
Mar 31, 2010 | 2002 Hyundai Santa Fe
Jan 07, 2010 | 1992 Oldsmobile Ninety Eight
Aug 01, 2009 | 1991 Volkswagen Corrado
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: