Question about BMW 323

1 Answer

Have a 1999 bmw has check engin light po304 camshaf sesor ciruit fault

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 437 Answers

Common problem on a car of this age. Easily replaced component. I cannot tell you how easily because you did not mention your car model. If you have a three series, it is a thumb-sized sensor that connects to the front of the valve cover, right next to the oil filter holder. all you need to do is loosen the top of the oil line for the VANOS in order to access the screw that holds the cam position sensor in place. You should replace the soft washers at the top of the oil line so you don't develop a leak there. That oil line itself is a common leak point, so you might want to look at it before you buy the sensor. Now would be a good time to replace both parts if the oil line is leaking.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the camshaf positioning censor located on a 1999 Isuzu amigo


You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV,
owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..

Feb 26, 2018 | 1999 Isuzu Amigo

1 Answer

Bmw x5 abnormal light engine fault light


In normal driving engine fault light abnormal light. Diagnosis diagnosis with BMW ICOM.Check exhaust pipe, air inlet pipe; check the sealing of the coking problem, is most likely to damage caused by oxygen sensor.Advised a change of oxygen sensor.

Dec 07, 2013 | BMW X5 Series Cars & Trucks

1 Answer

Engine light on and speedometer not working


Seed sesor fault. scan test your vehicle at auto zone for free. there are two speed sensors on this vehicle. replace both. not hard to replace.

Apr 14, 2013 | 2000 Dodge Grand Caravan

1 Answer

The computer says that it has a code p1131 manufactor control fuel air metering also p0135 o2 sensor heater ciruit malfunction bank1 sensor1 and p0307 cylinder misfire


firstly check your 02 sesor bank 1 sensor 1 first because maybe 02 sensor death come out more fuel until air metering cannot control so air metering code came out and spark plug overdose fuel and misfire incur check with ohm meter to get the ohm from the 02 sensor rectify

Apr 02, 2011 | 1999 Mercury Grand Marquis

1 Answer

I have a 1999 bmw 528I the check engine light and EML just came on, what does this mean?


EML means that your cars computer(ecu) has detected a fault from a sensor on your engine.You need to have your car diagnosed to determine what fault code it is and then you will be able to solve the problem

Mar 12, 2011 | 2008 BMW 528i Sedan

1 Answer

My engine light came on i have a small oil leak which is leaking to the manifold wat is making the engine light 2 come on


Hi Iggie,
Take the vehicle and have a scan carried out on it. The results will pin point the problem....The engine check light will come on with a number of faults....It's a general warning light which means a fault has been recorded and registered....
Regards Johngee10

Feb 03, 2011 | 1999 BMW 318 ti

2 Answers

BMW 1999 318i eml light come on whilst driving. Car drives well but light still on. Any thoughts to why ?


The EML light will come on if you have an emissions fault , the car may drive ok but you may find you are using more fuel , it would be better to get the problem checked just to be on the safe side , regards mark.

Aug 10, 2009 | 1999 BMW 328 Series

1 Answer

I have a 318i 1998, the engine light came on. i hook up my obd scaner to it and the trouble codes are as follows p1174 (fuel trim adaptation additive bank 1 malfunction,po300 (random/multiple cyl. misfire...


Sounds like it may be running a bit lean - do basic checks for air leaks in the induction system (such as leaking manifold gasket, loose hose fittings to air flow sensor etc).
Condition of HT leads also worth a check.

Jun 07, 2009 | 1999 BMW 318 ti

2 Answers

1999 323i BMW


you could have one of many faults. It would be dvisable to read the fault memory of your engine mangement unit. sounds like your throttle housung unit is more than likely your fault, but is impossible to know without using a diagnostic computor

Sep 27, 2008 | 1999 BMW 323 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Chris Bowser

Level 1 Expert

18 Answers

Nyte_Ryder

Level 2 Expert

102 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...